Keratin Modified and Functionalized as a Reinforcement and Nucleation Agent of β-Polypropylene Composites
Source abstract
Abstract
A new green β nucleating agent has been obtained from industrial waste. This way, pimelic acid (PA) was chemically supported on treated keratin fibers to promote the β polymorph into a polypropylene matrix using several percentages of reinforcement (0.5, 1.0, and 5.0% w/w). IR spectra suggest a successful functionalization showing the presence of a new band at 1571 cm−1, indicating a bond between PA and the keratin surface. According to the scanning electron spectroscopy, the nucleating agent was homogeneously distributed on the keratin surface. Wide angle X-ray diffraction (WAXD) patterns and differential scanning calorimetry (DSC) curves demonstrate that the functionalized keratin fibers were able to promote a high percentage of β-crystal into the polypropylene matrix (79% and 60%, respectively). The thermomechanical properties were characterized by dynamic mechanical analysis (DMA). At −30°C, the new reinforcement provides an important increase of 25% in the storage modulus compared with the raw polypropylene. The new reinforcement seems to strongly influence the mobility of the amorphous phase, shifting the Tg to higher temperatures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dyeing and Modifying Textile Fibers · Natural Fiber Reinforced Composites · Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Departamento de Ingeniería Química, Tecnológico Nacional de México en Celaya, Celaya, Guanajuato, México
Departamento de metal-mecánica, Tecnológico Nacional de México/Instituto Tecnológico de Querétaro Av. Tecnológico s/n Esq. Gral. Mariano Escobedo, Santiago de Querétaro, México
Instituto de Agroingenierías, Universidad del Papaloapan, Oaxaca, México
Funding
Consejo Nacional de Ciencia y Tecnología · National Technology of Mexico
References (35)
Show source-provided references
1. 10.1007/s10853-018-2866-310.1007/s10853-018-2866-3 ↗
2. 10.1007/s10853-019-04045-y10.1007/s10853-019-04045-y ↗
3. 10.1007/s10973-014-4304-310.1007/s10973-014-4304-3 ↗
4. 10.1007/s10924-017-1115-110.1007/s10924-017-1115-1 ↗
5. 10.3390/polym603068610.3390/polym6030686 ↗
6. 10.1007/s10853-014-8706-110.1007/s10853-014-8706-1 ↗
7. 10.1007/s10853-015-9365-610.1007/s10853-015-9365-6 ↗
8. 10.1002/app.3081910.1002/app.30819 ↗
9. 10.1007/s10965-020-02241-y10.1007/s10965-020-02241-y ↗
10. 10.1016/j.compscitech.2007.08.01510.1016/j.compscitech.2007.08.015 ↗
11. 10.1080/15440478.2020.185414510.1080/15440478.2020.1854145 ↗
12. 10.1016/S0032-3861(01)00089-110.1016/S0032-3861(01)00089-1 ↗
13. 10.1016/j.polymertesting.2020.10643710.1016/j.polymertesting.2020.106437 ↗
14. 10.1016/j.compositesb.2006.06.01310.1016/j.compositesb.2006.06.013 ↗
15. 10.1016/j.polymer.2018.07.03010.1016/j.polymer.2018.07.030 ↗
16. Oladele I. O. · Journal of Engineering and Engineering Technology · 2018 · 12 · 139
17. 10.1007/s10973-017-6188-510.1007/s10973-017-6188-5 ↗
18. 10.1007/s10443-020-09840-410.1007/s10443-020-09840-4 ↗
19. 10.1007/s10924-020-01921-610.1007/s10924-020-01921-6 ↗
20. 10.1177/152808372092473010.1177/1528083720924730 ↗
21. 10.1007/s10924-007-0054-710.1007/s10924-007-0054-7 ↗
22. 10.1016/j.conbuildmat.2015.12.07510.1016/j.conbuildmat.2015.12.075 ↗
23. 10.1163/15685540030018356010.1163/156855400300183560 ↗
24. 10.1016/j.jclepro.2017.10.10110.1016/j.jclepro.2017.10.101 ↗
25. 10.1016/j.carbpol.2018.11.08310.1016/j.carbpol.2018.11.083 ↗
26. 10.1002/pc.2489010.1002/pc.24890 ↗
27. Sharma S. · 2016 · 693
28. 10.1007/s10924-020-01810-y10.1007/s10924-020-01810-y ↗
29. 10.1016/S0266-3538(02)00225-710.1016/S0266-3538(02)00225-7 ↗
30. 10.3389/fmats.2019.0022610.3389/fmats.2019.00226 ↗
31. 10.1002/pen.1039010.1002/pen.10390 ↗
32. 10.1081/MB-12001308910.1081/MB-120013089 ↗
33. 10.1016/j.jclepro.2020.12097810.1016/j.jclepro.2020.120978 ↗
34. 10.1002/app.4600710.1002/app.46007 ↗
35. 10.1002/pi.414810.1002/pi.4148 ↗