Use of Waste Raw Materials in the Form of Hemp Shives and Waste Sheep Wool to Produce Composites Dedicated to Thermal Insulation
Source abstract
Abstract
The aim of this research was to develop composites dedicated to thermal insulation, developed on the basis of natural raw materials. The composites consisted of mixture of lime, cement, water, and two biodegradable materials: a local mountain sheep wool treated as troublesome waste and hemp shives obtained by processing decorticated hemp straw of the Białobrzeskie variety. On a laboratory scale, blocks were produced with varying percentages of shives with a fraction of 10 and 30 mm. Sheep wool used was in two ways: (1) mixed in the mass or (2) arranged in a layer between lime. The basic parameter – thermal conductivity of the composites was determined. The research showed that making a composite of lime with hemp shives decreased the thermal conductivity coefficient of the material. The addition of hemp shives reduced the thermal conductivity coefficient by an average of 36% and 45%, when using shives crushed into 10 mm fractions or 30 mm fractions, respectively. The addition of 20% and 40% sheep wool decreased the λ coefficient by approximately 40%. The λ coefficient of the composite formed using hemp shives and wool is 0.0738 W/mK. The proposed composites might be a good alternative to commonly used thermal insulation materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Hygrothermal properties of building materials · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Innovative Textile Technologies, Institute of Natural Fibres and Medicinal Plants-National Research Institute, Poznan, Poland
Faculty of Civil and Transport Engineering, Poznan University of Technology, Poznan, Poland
References (42)
Show source-provided references
1. 10.4995/vitruvio-ijats.2019.1177110.4995/vitruvio-ijats.2019.11771 ↗
2. 10.1016/j.jobe.2018.07.00210.1016/j.jobe.2018.07.002 ↗
3. 10.1016/j.conbuildmat.2022.12785710.1016/j.conbuildmat.2022.127857 ↗
4. Barnat-Hunek, D., P. Smarzewski, and S. Fic. 2015. “Mechanical and Thermal Properties of Hemp-Lime Composites.” Composites Theory and Practice 15 (1): 21–27. https://kompozyty.ptmk.net/pliczki/pliki/4_2015_t1_Barnat%20Hunek.pdf.
5. 10.4324/978008050498810.4324/9780080504988 ↗
6. 10.17660/ActaHortic.2012.933.2310.17660/ActaHortic.2012.933.23 ↗
7. 10.3390/agronomy1205121010.3390/agronomy12051210 ↗
8. 10.1080/15440478.2019.158407810.1080/15440478.2019.1584078 ↗
9. 10.1080/15440478.2018.153419010.1080/15440478.2018.1534190 ↗
10. 10.1177/152808371769583710.1177/1528083717695837 ↗
11. 10.1080/15440478.2023.224610310.1080/15440478.2023.2246103 ↗
12. 10.3390/ma1416462910.3390/ma14164629 ↗
13. 10.2478/rtuect-2022-004010.2478/rtuect-2022-0040 ↗
14. Busbridge, R., and R. Rhydwen. 2010. “An Investigation of the Thermal Properties of Hemp and Clay Monolithic Walls.” Proceedings of Advances in Computing and Technology, The School of Computing and Technology 5th Annual Conference, London, UK. University of East London Institutional Repository.
15. 10.1016/j.enbuild.2018.03.01910.1016/j.enbuild.2018.03.019 ↗
16. 10.1016/j.jlp.2023.10509510.1016/j.jlp.2023.105095 ↗
17. 10.1016/j.jclepro.2016.10.10210.1016/j.jclepro.2016.10.102 ↗
18. 10.1016/j.conbuildmat.2007.07.01610.1016/j.conbuildmat.2007.07.016 ↗
19. Garikapati, K. P., and P. Sadeghian. 2018. “Physical and Mechanical Properties of Flax Lime Concrete.” Paper presented at the CSCE Annual Conference, Fredericton NB, New Brunswick, Canada. Canadian Society of Civil Engineers. June 13–16.
20. 10.3390/app1314844710.3390/app13148447 ↗
21. 10.1016/j.clema.2022.10012710.1016/j.clema.2022.100127 ↗
22. 10.3390/ma1601045910.3390/ma16010459 ↗
23. 10.3390/ma1509313910.3390/ma15093139 ↗
24. 10.1080/15440478.2022.215960910.1080/15440478.2022.2159609 ↗
25. 10.1016/j.compositesb.2015.01.03810.1016/j.compositesb.2015.01.038 ↗
26. 10.1016/j.jclepro.2020.12212910.1016/j.jclepro.2020.122129 ↗
27. 10.15341/mast(2375-9402)/02.02.2016/00310.15341/mast(2375-9402)/02.02.2016/003 ↗
28. 10.1016/j.conbuildmat.2022.12685510.1016/j.conbuildmat.2022.126855 ↗
29. 10.3390/su1203076110.3390/su12030761 ↗
30. 10.1016/j.enbuild.2015.01.05610.1016/j.enbuild.2015.01.056 ↗
31. 10.24425/ace.2020.13440910.24425/ace.2020.134409 ↗
32. 10.1088/1755-1315/290/1/01202710.1088/1755-1315/290/1/012027 ↗
33. 10.1016/j.buildenv.2017.12.00610.1016/j.buildenv.2017.12.006 ↗
34. 10.1016/j.indcrop.2021.11392110.1016/j.indcrop.2021.113921 ↗
35. 10.1016/j.jclepro.2020.12390510.1016/j.jclepro.2020.123905 ↗
36. 10.1016/j.egypro.2018.07.06310.1016/j.egypro.2018.07.063 ↗
37. 10.26168/icbbm2015.4610.26168/icbbm2015.46 ↗
38. 10.5755/j01.sace.8.3.745110.5755/j01.sace.8.3.7451 ↗
39. Spychalski, G., J. Mańkowski, A. Kubacki, J. Kołodziej, W. Cierpucha, I. Pniewska, P. Baraniecki, and L. Grabowska. 2013. Industrial Hemp Cultivation and Processing Technology. Poznan, Poland: INF&MP.
40. 10.3390/polym1506150010.3390/polym15061500 ↗
41. 10.3390/su1009333110.3390/su10093331 ↗
42. 10.1016/j.enbuild.2012.02.01410.1016/j.enbuild.2012.02.014 ↗