journal article·2023-04-24Open access

Flexible Insulation Mats from Zostera marina Seagrass

Aldi Kuqo, Carsten Mai

Journal of Natural Fibers· Volume 20· Issue 1

Abstract

The dead seagrass leaves accumulated on the seashores, also known as beach (seagrass) wracks, can be considered a sustainable and ecologically beneficial source for application in the construction sector. An innovative thermal insulation material composed of Zostera marina seagrass leaves was developed using bicomponent fibers as a binding agent. The bicomponent fibers consisted of polypropylene in the core and polyethylene in the sheath. This work aimed to investigate the effect of mat density on mechanical properties (compression and internal bond strength), thermal conductivity and fire properties. The seagrass-based (SG) mats were compared to reference mats consisting of wood fibers (WF). The digital and scanning electron microscopy investigation revealed the differences in the bonding mechanism between the two types of mats. Although slightly higher than WF mats, the thermal conductivity of SG mats still varied from 0.039 to 0.051 W m−1 K−1 and is comparable to those of other natural fiber-based boards with the same density range. The low peak heat release of SG mats (up to 63% lower than wood fiber-based mats) indicates their high resistance to fire. SG mats provide novel possibilities for using new environmentally friendly materials intended for ceiling and partition applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Bone Tissue Engineering Materials · Material Selection and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Wood Biology and Wood Products, Faculty of Forest Sciences and Forest Ecology, University of Goettingen, Göttingen, Germany

References (31)

Show source-provided references
1. 10.4028/www.scientific.net/CTA.1.77210.4028/www.scientific.net/CTA.1.772 ↗
2. 10.1007/s00107-016-1059-510.1007/s00107-016-1059-5 ↗
3. DIN EN 12667. 2001. Thermal performance of building materials and products - determination of thermal resistance by means of guarded hot plate and heat flow meter methods - products of high and medium thermal resistance;. In German version EN, Vol. 12667, 2001. Berlin, Germany.
4. DIN EN 1607. 2013. Thermal insulating products for building applications - determination of tensile strength perpendicular to faces. In German version EN 1607:2013. Berlin, Germany.
5. DIN EN 826. 2013. Thermal insulating products for building applications - determination of compression behaviour. In German version EN, Vol. 826, 2013. Berlin, Germany.
6. 10.5772/3384210.5772/33842 ↗
7. Graupner, N., and J Müssig. 2010. Technical applications of natural fibres: An overview Müssig, J. In Industrial applications of natural fibres: Structure, properties and technical applications. West Sussex, UK: John Wiley & Sons, Ltd 73–86.
8. 10.1016/j.conbuildmat.2018.05.19510.1016/j.conbuildmat.2018.05.195 ↗
9. 10.1016/j.jobe.2021.10260410.1016/j.jobe.2021.102604 ↗
10. 10.1080/17480272.2021.195891910.1080/17480272.2021.1958919 ↗
11. ISO 5560-1. 2002. Reaction-to-fire tests - heat release, smoke reduction and mass loss rate - part 1 - heat release rate (cone calorimeter method), 5660–1. Geneva, Switzerland.
12. Jedidi, M., and A. Abroug. 2020. ”Valorization of Posidonia oceanica Balls for the Manufacture of an Insulating and Ecological Material.” Jordan Journal of Civil Engineering 14.3.
13. 10.1016/j.enbuild.2015.12.03710.1016/j.enbuild.2015.12.037 ↗
14. 10.1016/j.rser.2020.11003810.1016/j.rser.2020.110038 ↗
15. 10.1080/15440478.2021.199017510.1080/15440478.2021.1990175 ↗
16. 10.1177/002199831880802410.1177/0021998318808024 ↗
17. 10.3390/ma1519693310.3390/ma15196933 ↗
18. LeVan, S. L., and J. E. Winandy. 1990. Effects of fire retardant treatments on wood strength: A review. Wood and Fiber Science 22:113–31.
19. 10.1016/j.compositesa.2022.10686410.1016/j.compositesa.2022.106864 ↗
20. 10.1177/2F0021998322108779310.1177/2F00219983221087793 ↗
21. 10.1201/978020349243710.1201/9780203492437 ↗
22. 10.1080/15440478.2020.185627410.1080/15440478.2020.1856274 ↗
23. 10.1111/gcbb.1282510.1111/gcbb.12825 ↗
24. Shi, J. L., S. Y. Zhang, B. Riedl, and G. Brunette. 2005. Flexural properties, internal bond strength, and dimensional stability of medium density fiberboard panels made from hybrid poplar clones. Wood and Fiber Science 37:629–37.
25. Teppand, T. G., D. Jones and C. Brischke. 2017. Performance of bio-based building materials. Duxford, UK: Woodhead Publishing.
26. 10.1080/15440478.2019.156957510.1080/15440478.2019.1569575 ↗
27. 10.1007/s00107005046610.1007/s001070050466 ↗
28. 10.1007/BF0286672110.1007/BF02866721 ↗
29. 10.15376/biores.6.4.4055-406610.15376/biores.6.4.4055-4066 ↗
30. 10.3390/polym1405086510.3390/polym14050865 ↗
31. 10.1016/j.jobe.2021.10317210.1016/j.jobe.2021.103172 ↗