journal article·2019-12

Hyperelastic and hydrophobic silica aerogels with enhanced compressive strength by using VTES/MTMS as precursors

Zhuchao Yang, Huijun Yu, Xiaolei Li, Honghui Ding, Huiming Ji

Publisher page

Abstract

Abstract A hyperelastic and hydrophobic silica aerogel has been prepared by using Vinyltriethoxysilane (VTES) and Methyltrimethoxysilane (MTMS) as the composite precursor. The effect of the VTES/MTMS molar ratio on the morphology of the VTES/MTMS-based aerogel has been investigated. The VTES/MTMS-based aerogel with a typical nano-porous structure exhibits a high surface area (321 m2/g), a low density (0.143 g·cm−3) and low thermal conductivity (0.024 ± 0.003 W·m−1·K−1). The existence of methyl and vinyl groups is beneficial to enhancing the elasticities of aerogels. The MVTES5, with a VTES/MTMS molar ratio of 0.060, could bear a compressive strain of 55% and quickly recover to its original length after the stress is released. It is demonstrated that the partial replacement of the methyl with vinyl groups can greatly enhance the mechanical properties, and the compressive stress is 0.571 MPa. Furthermore, the VTES/MTMS-based aerogel exhibits hydrophobic properties with a contact angle of 146°.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Surface Modification and Superhydrophobicity · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Hydrophobic monolithic aerogels by nanocasting polystyrene on amine-modified silica10.1039/b604323b ↗
2. Imperviousness of the hydrophobic silica aerogels against various solvents and acids10.1016/j.apsusc.2006.09.015 ↗
3. A kinetics study on the in situ reversible addition–fragmentation chain transfer and free radical polymerization of styrene in presence of silica aerogel nanoporous particles10.1080/15685551.2013.840496 ↗
4. Tailoring elastic properties of silica aerogels cross-linked with polystyrene10.1021/am8001617 ↗
5. Ultralight and low thermal conductivity polyimide-polyhedral oligomeric silsesquioxanes aerogels10.1002/mame.201700403 ↗
6. Ultralight nanofibre-assembled cellular aerogels with superelasticity and multifunctionality10.1038/ncomms6802 ↗
7. Quartz fiber reinforced Al2O3-SiO2 aerogel composite with highly thermal stability by ambient pressure drying10.1016/j.jnoncrysol.2018.10.039 ↗
8. Constructing secondary-pore structure by in-situ synthesized mullite whiskers to prepare whiskers aerogels with ultralow thermal conductivity10.1016/j.jeurceramsoc.2018.10.015 ↗
9. New transparent Methylsilsesquioxane aerogels and xerogels with improved mechanical properties10.1002/adma.200602457 ↗
10. Flexible silica aerogel based on methyltrimethoxysilane with improved mechanical property10.1016/j.jnoncrysol.2017.02.014 ↗
11. Flexible hybrid aerogels prepared under subcritical conditions10.1039/c3ta12431b ↗
12. Methyltrimethoxysilane-based elastic aerogels: effects of the supercritical medium on structure-sensitive properties10.1134/S0036023615040117 ↗
13. Preparation and characterization of organic-inorganic hybrid flexible silica aerogel
14. Elastic silica aerogel using methyltrimethoxysilane precursor via ambient pressure drying10.1007/s10934-015-0026-6 ↗
15. Facile synthesis of large-sized monolithic methyltrimethoxysilane-based silica aerogel via ambient pressure drying10.1007/s10971-017-4377-0 ↗
16. Rapid synthesis of amine cross-linked epoxy and methyl co-modified silica aerogels by ambient pressure drying10.1016/j.jnoncrysol.2012.06.013 ↗
17. Mechanical performance and thermal stability of glass fiber reinforced silica aerogel composites based on co-precursor method by freeze drying10.1016/j.apsusc.2017.12.146 ↗
18. Mechanical properties of ceramic fiberreinforced silica aerogel insulation composites
19. Mechanically reinforced silica aerogel nanocomposites via surface initiated atom transfer radical polymerizations10.1039/c0jm01448f ↗
20. Epoxy reinforced aerogels made using a streamlined process10.1021/am100422x ↗
21. Chemical, physical, and mechanical characterization of isocyanate cross-linked amine-modified silica aerogels10.1021/cm0513841 ↗
22. Transparent, superflexible doubly cross-linked polyvinylpolymethylsiloxane aerogel superinsulators via ambient pressure drying10.1021/acsnano.7b07117 ↗
23. Studies on rheological properties of methyltriethoxysilane (MTES) based flexible superhydrophobic silica aerogels10.1016/j.micromeso.2008.08.025 ↗
24. Aerogel-based thermal superinsulation: an overview10.1007/s10971-012-2792-9 ↗
25. A simple facile preparation of methyltriethoxysilane based flexible silica aerogel monoliths10.1016/j.matlet.2017.05.104 ↗
26. Silica aerogel/aramid pulp composites with improved mechanical and thermal properties10.1016/j.jnoncrysol.2016.10.015 ↗
27. Synthesis of new flexible aerogels from MTMS/DMDMS via ambient pressure drying10.1088/1757-899X/18/3/032013 ↗
28. Superelastic and superhydrophobic bacterial cellulose/silica aerogelswith hierarchical cellular structure for oil absorption and recovery10.1016/j.jhazmat.2017.12.045 ↗
29. Versatile double-cross-linking approach to transparent, machinable, supercompressible, highly bendable aerogel thermal superinsulators10.1021/acs.chemmater.8b00563 ↗
30. Reaction of carbamoylsilane with nitrone and tautomerism of product
31. Superhydrophobic silica aerogels based on methyltrimethoxysilane precursor10.1016/j.jnoncrysol.2003.08.048 ↗
32. Cross-linking 3D assemblies of nanoparticles into mechanically strong aerogels by surface-initiated free-radical polymerization10.1021/cm800963h ↗