journal article·2017-11

Role of Li2O on the structure and viscosity in CaO-Al2O3-Li2O-Ce2O3 melts

Jie Qi, Chengjun Liu, Maofa Jiang

Publisher page

Abstract

Abstract Well understanding the role fluxing agents in the CaO-Al 2 O 3 -based slag system is essential to devise new mold fluxes for heat-resistant steel as well as for further improvement of data for viscosities and structure properties of the molten fluxes. The role of Li 2 O in CaO-Al 2 O 3 -Li 2 O-Ce 2 O 3 slag system was investigated through measuring viscosity combined with the FTIR spectra analysis. It was noted that Li 2 O show obvious effect of decreasing viscosity in the CaO-Al 2 O 3 -based slag system. The viscosity of the CaO-Al 2 O 3 -Li 2 O-Ce 2 O 3 slag melts decreased with increasing Li 2 O content. The relationship between the viscosity and the slag structure was discussed. Under the condition of increasing Li 2 O addition from 10 to 14 mass%, the relative ratio of [AlO 4 ]-tetrahedrons and [AlO 6 ]-octahedrons remain constant. The O 2– dissociated from Li 2 O just cut the network formed by [AlO 4 ]-tetrahedrons. The depolymerization of [AlO 4 ]-tetrahedrons from Q 4 units to Q 3 and Q 2 units was the main reason of the decrease of the viscosity. When the content of Li 2 O increased from 14 to 18 mass%, more and more O 2– dissociated from Li 2 O reacted with [AlO 4 ]-tetrahedrons to form [AlO 6 ]-octahedrons. The decrease of viscosity was mainly induced by the increase of free oxygen and the formation of [AlO 6 ]-octahedrons, which acts as a network modifier.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Materials Engineering and Processing · Minerals Flotation and Separation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. The design idea of refractory steel
2. Research, application and development of domestic heat-resistant steels and alloys for power plants
3. Effect of RE on molybdenum partitioning and resultant mechanical and microstructural behavior of a duplex stainless steel during hot working condition10.1016/S1002-0721(14)60390-2 ↗
4. Zhu · 2008 · 274
5. Effects of rare earth oxide on viscosity of mold fluxes for continuous casting
6. Influence of rare earth on the mould flux properties
7. Production of high-aluminum steel slabs
8. Investigation on viscosity of mould fluxes during continuous casting of aluminium containing TRIP steels10.1179/174328109X461419 ↗
9. Zhu · 2008
10. Development and evaluation of lime alumina-based mold powders for casting high-aluminum TRIP steel grades
11. Effect of Ce2O3 on structure, viscosity, and crystalline phase of CaO-Al2O3-Li2O-Ce2O3 slags10.1007/s11663-016-0850-3 ↗
12. Study of a new mold flux for heat-resistant steel containing cerium continuous casting10.1002/srin.201500259 ↗
13. Viscous properties of new mould flux based on aluminate system with CeO2 for continuous casting of RE alloyed heat resistant steel10.1016/S1002-0721(16)60032-7 ↗
14. Study on properties of alumina-based mould fluxes for high-Al steel slab casting10.1002/srin.201200092 ↗
15. Crystallization behaviors of CaO-SiO2-Al2O3-Na2O-CaF2-(Li2O-B2O3) mold fluxes10.1007/s11663-014-0091-2 ↗
16. Effect of CaF2 and Li2O additives on the viscosity of CaO-SiO2-Na2O Slags10.2355/isijinternational.51.1 ↗
17. Effects of Li2O and Na2O on the crystallization behavior of lime-alumina-based mold flux for casting high-Al steels10.1007/s11663-014-0063-6 ↗
18. Evaluation of surface tension of Ce-bearing slag based on calcium aluminate system
19. Activity of AlO1.5 for the CaO–AlO1.5–CeO1.5 system at 1773K10.2355/isijinternational.38.1292 ↗
20. Li · 2008 · 21
21. Break temperatures of mould fluxes and their relevance to continuous casting10.1179/030192300677534 ↗
22. Huang · 1989 · 176
23. Development of viscosity calculation method for mould powders10.1179/1743281212Y.0000000091 ↗
24. Investigation of the viscosity and structural properties of CaO-SiO2-TiO2 slags10.1007/s11663-014-0053-8 ↗
25. Effect of P2O5 and FetO on the viscosity and slag structure in steelmaking slags10.1007/s11663-014-0270-1 ↗
26. Yu · 2011 · 73
27. Structural investigation of CaO-Al2O3 and CaO-Al2O3-CaF2 slags via Fourier transform infrared spectra10.2355/isijinternational.42.38 ↗
28. Effect of B2O3 addition on viscosity of mould slag containing low silica content10.1179/1743281213Y.0000000107 ↗
29. Role of B2O3 on the viscosity and structure in the CaO-Al2O3-Na2O-based system10.1007/s11663-013-9953-2 ↗
30. Structure-viscosity relationship of low-silica calcium aluminosilicate melts10.2355/isijinternational.54.2031 ↗
31. Structure and dynamics in calcium aluminate liquids: high-temperature 27Al NMR and Raman spectroscopy10.1111/j.1151-2916.1994.tb07058.x ↗
32. A structural investigation of CaO-Al2O3 glasses via 27Al MAS-NMR10.1016/0022-3093(95)00536-6 ↗
33. Raman spectroscopy of calcium aluminate glasses and crystals10.1016/0022-3093(83)90672-5 ↗
34. Weng · 2005 · 114
35. Beer's low without calculus10.1021/ed041p366 ↗
36. Slide rule conversion of per cent transmittance to absorbance10.1021/ed048p388 ↗