journal article·2018-07Open access

Engineering biologically extensible hydrogels using photolithographic printing

Shail Maharshi Mehta, Tao Jin, Ilinca Stanciulescu, K. Jane Grande-Allen

Acta Biomaterialia· Volume 75

Abstract

Biomaterials for tissue engineering that recapitulate the mechanical response and biological function of native tissue are highly sought after to lessen the burden of damaged or diseased tissue. Poly(ethylene glycol) diacrylate (PEGDA) hydrogels are a popular candidate because of their favorable bioactive properties. However, their mechanical behavior is very dissimilar to that of biological tissue, which behaves in a mechanically anisotropic, nonlinear, and viscoelastic fashion. It has been previously shown that PEGDA hydrogels can be patterned in alternating linear strips of different stiffnesses to generate anisotropic behavior, but these constructs still have a linear stress-strain response. In this study, we imparted nonlinear mechanical properties to PEGDA hydrogels by fabricating composite hydrogel constructs consisting of a stiff sinusoidal reinforcement embedded into a softer base matrix. This was achieved by polymerizing low molecular weight (MW) PEGDA hydrogel precursor into a stiff sinusoidal shape and then polymerizing this construct into a high MW precursor. Samples were generated with different relative stiffness between the two components and a range of sinusoid periodicities to assess the tunability of the resulting stress-strain curve. Tensile testing indicates that the sinusoidal patterning gives rise to nonlinear stress-strain behavior. Varying the relative stiffness was shown to tune the slope of the linear region of the stress-strain curve, and varying periodicity was shown to affect the length of the toe region of this curve. We conclude that composite hydrogels with stiff sinusoidally-patterned reinforcements display mechanical properties more similar to those of biological tissue than uniform or linearly-patterned hydrogels. Statement of significance Hydrogel biomaterials are a popular candidate for engineering constructs that can mimic the properties of native tissue for disease modeling and tissue-engineering applications. Studies have shown that poly(ethylene) glycol diacrylate (PEGDA) hydrogels can be fabricated to display many biological aspects of native tissue. However, they are unable to recapitulate fundamental mechanical properties of such tissue, such as anisotropy and nonlinearity. Photolithographic techniques have been employed to generate anisotropic linear PEGDA hydrogels via patterned reinforcement. The present study indicates that such techniques can be modified to generate PEGDA constructs with a sinusoidal reinforcement that display a strongly nonlinear response to tensile loading. This work sets the stage for more intricate patterning for providing increased control over hydrogel mechanical response.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Cellular Mechanics and Interactions · Hydrogels: synthesis, properties, applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Biomaterials & scaffolds for tissue engineering10.1016/S1369-7021(11)70058-X ↗
2. Organ Procurement and Transplantation Network (OPTN) and Scientific Registry of Transplant Recipients (SRTR). OPTN/SRTR 2011 Annual Data Report. Department of Health and Human Services, Health Resources and Services Administration, Healthcare Systems Bureau, Division of Transplantation (2012).
3. Newer immunosuppressive drugs a review10.1681/ASN.V1061366 ↗
4. Thromboembolic and bleeding complications in patients with mechanical heart valve prostheses10.1161/01.CIR.89.2.635 ↗
5. Twenty-year clinical experience with porcine bioprostheses10.1016/0003-4975(96)00629-7 ↗
6. Tissue heart valves: current challenges and future research perspectives10.1002/(SICI)1097-4636(19991215)47:4<439::AID-JBM1>3.0.CO;2-O ↗
7. Calcification of tissue heart valve substitutes: progress toward understanding and prevention10.1016/j.athoracsur.2004.06.033 ↗
8. The mechanical properties of porcine aortic valve tissues10.1016/0021-9290(83)90016-7 ↗
9. Arterial wall mechanics in conscious dogs: assessment of viscous, inertial, and elastic moduli to characterize aortic wall behavior10.1161/01.RES.76.3.468 ↗
10. Viscoelastic and anisotropic mechanical properties of in vivo muscle tissue assessed by supersonic shear imaging10.1016/j.ultrasmedbio.2010.02.013 ↗
11. In vitro generation of osteochondral composites10.1016/S0142-9612(00)00127-7 ↗
12. Tissue engineering tissue engineering of cardiac valves on the basis of PGA/PLA co-polymers
13. Biodegradable materials for bone repair and tissue engineering applications10.3390/ma8095273 ↗
14. Development of chitosan scaffolds with enhanced mechanical properties for intestinal tissue engineering applications10.3390/jfb6040999 ↗
15. Anisotropic shape-memory alginate scaffolds functionalized with either type I or type II collagen for cartilage tissue engineering10.1089/ten.tea.2016.0055 ↗
16. A drug-induced hybrid electrospun poly-capro-lactone: Cell-derived extracellular matrix scaffold for liver tissue engineering10.1089/ten.tea.2016.0419 ↗
17. Electrospinning of poly (glycerol sebacate)-based nanofibers for nerve tissue engineering10.1016/j.msec.2016.03.035 ↗
18. Engineering controllable anisotropy in electrospun biodegradable nanofibrous scaffolds for musculoskeletal tissue engineering10.1016/j.jbiomech.2006.09.004 ↗
19. Electrospun poly (l-lactide-co-acryloyl carbonate) fiber scaffolds with a mechanically stable crimp structure for ligament tissue engineering10.1021/bm401813j ↗
20. Braided and stacked electrospun nanofibrous scaffolds for tendon and ligament tissue engineering10.1089/ten.tea.2016.0319 ↗
21. Harris · 2013
22. Cell attachment activity of fibronectin can be duplicated by small synthetic fragments of the molecule10.1038/309030a0 ↗
23. Sequence specificities of human fibroblast and neutrophil collagenases10.1016/S0021-9258(20)89563-5 ↗
24. Biocompatibility of hydrogel-based scaffolds for tissue engineering applications10.1016/j.biotechadv.2017.05.006 ↗
25. Hydrolytically degradable poly (ethylene glycol) hydrogel scaffolds with tunable degradation and mechanical properties10.1021/bm100137q ↗
26. Mechanical characterisation of hydrogel materials10.1179/1743280413Y.0000000022 ↗
27. Integrating valve-inspired design features into poly(ethylene glycol) hydrogel scaffolds for heart valve tissue engineering10.1016/j.actbio.2014.11.042 ↗
28. Numerical investigation of the influence of pattern topology on the mechanical behavior of PEGDA hydrogels10.1016/j.actbio.2016.10.041 ↗
29. Covalently immobilized gradients of bFGF on hydrogel scaffolds for directed cell migration10.1016/j.biomaterials.2004.09.021 ↗
30. PEGDA hydrogels with patterned elasticity: Novel tools for the study of cell response to substrate rigidity10.1002/bit.22574 ↗
31. Dual-material 3D printed metamaterials with tunable mechanical properties for patient-specific tissue-mimicking phantoms
32. Indentation versus tensile measurements of Young’s modulus for soft biological tissues10.1089/ten.teb.2010.0520 ↗
33. Light-guiding hydrogels for cell-based sensing and optogenetic synthesis in vivo10.1038/nphoton.2013.278 ↗
34. Mechanosensation through integrins: cells act locally but think globally10.1073/pnas.0530201100 ↗
35. Collagen fibers, reticular fibers and elastic fibers. A comprehensive understanding from a morphological viewpoint10.1679/aohc.65.109 ↗
36. Y.S. Zhang. Spatially and temporally controlled hydrogels for tissue engineering10.1016/j.mser.2017.07.001 ↗