journal article·2015-07

Composition and cooling-rate dependence of plastic deformation, densification, and cracking in sodium borosilicate glasses during pyramidal indentation

P. Malchow, K.E. Johanns, D. Möncke, S. Korte-Kerzel, L. Wondraczek, K. Durst

Publisher page

Abstract

Abstract Plastic deformation, densification, and cracking of sodium borosilicate (NBS) glasses were examined during indentation with a three-sided pyramidal indenter. Compositions of 74.0SiO 2 –10.0B 2 O 3 –16.0Na 2 O (NBS1), and 74.0SiO 2 –20.7B 2 O 3 –4.3Na 2 O–1.0Al 2 O 3 (NBS2) (mol%) were investigated. The effect of thermal history was additionally considered for the NBS2 composition, which lies near the boron anomaly line. Hardness, elastic modulus, and fracture toughness were estimated with instrumented indentation techniques. Atomic force microscopy (AFM), Raman micro-spectroscopy, and post-indent annealing experiments were used to analyze surface topographies, densification, and recovery of deformed material. The results indicate that NBS1 exhibits a greater hardness and elastic modulus, and undergoes less densification than the NBS2 glasses. Different casting conditions influenced the plastic deformation and onset of crack initiation in NBS2. Interpretation of fracture toughness measured by indentation is complicated by residual stresses, densification during contact, and model assumptions. However, distinct differences in elastic modulus, plastic deformation and cracking between the glasses were noticeable. Such results and observations are discussed in terms of structural changes in the glass.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Glass properties and applications · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. A new low-brittleness glass in the soda–lime–silica glass family10.1111/j.1151-2916.1998.tb02649.x ↗
2. Towards ultrastrong glasses10.1002/adma.201102795 ↗
3. Glass substrates for liquid crystal displays10.1111/j.2041-1294.2010.00009.x ↗
4. Principles of Pyrex glass chemistry: structure–property10.1007/s00339-014-8396-1 ↗
5. Plasticity, crack initiation and defect resistance in alkali-borosilicate glasses: from normal to anomalous behavior10.1016/j.jnoncrysol.2015.02.019 ↗
6. Raman microspectroscopic characterization of amorphous silica plastic behavior10.1111/j.1551-2916.2005.00747.x ↗
7. Raman spectroscopic study of structural changes induced by micro-indentation in low alkali borosilicate glasses10.1016/j.jnoncrysol.2013.12.038 ↗
8. A Raman-spectroscopic study of indentation-induced structural changes in technical alkali-borosilicate glasses with varying silicate network connectivity10.1016/j.jnoncrysol.2014.09.020 ↗
9. Effects of very high pressures on glass10.1063/1.1721294 ↗
10. Role of densification in deformation of glasses under point loading10.1111/j.1151-2916.1968.tb13318.x ↗
11. Plastic flow and fracture of glass
12. Indentation deformation mechanism in glass: densification versus shear flow10.1063/1.3407559 ↗
13. Indentation deformation/fracture of normal and anomalous glasses10.1016/0022-3093(79)90154-6 ↗
14. The correlation of indentation experiments10.1016/0022-5096(70)90029-3 ↗
15. Raman scattering in silica glass in the permanent densification region10.1016/S0022-3093(05)80395-3 ↗
16. Densified silica glass after shock compression10.1063/1.364021 ↗
17. Poisson's ratio and the densification of glass under high pressure10.1103/PhysRevLett.100.225501 ↗
18. Non-Debye normalization of the glass vibrational density of states in mildly densified silicate glasses10.1088/0953-8984/22/2/025402 ↗
19. Structural heterogeneity and pressure-relaxation in compressed borosilicate glasses by in situ small angle X-ray scattering10.1063/1.3593399 ↗
20. A reconstructive polyamorphous transition in borosilicate glass induced by irreversible compaction10.1063/1.4863348 ↗
21. Mechanical modelling of indentation-induced densification in amorphous silica10.1016/j.actamat.2008.03.010 ↗
22. Plastic processes in a range of soda–lime–silica glasses10.1016/0022-3093(84)90221-7 ↗
23. Indentation behavior of soda–lime silica glass, fused silica, and single-crystal quartz at liquid nitrogen temperature10.1111/j.1151-2916.1995.tb08241.x ↗
24. Raman spectroscopic investigation of the structure of silicate glasses. III. Raman intensities and structural units in sodium silicate glasses10.1063/1.442472 ↗
25. Strain-rate sensitivity of glasses10.1016/j.jnoncrysol.2014.08.023 ↗
26. Influence of melting and annealing conditions on the structure of borosilicate glasses
27. Thermal history of a low alkali borosilicate glass probed by infrared and Raman spectroscopy
28. Influence of melting and annealing conditions on the optical spectra of a borosilicate glass doped with CoO and NiO
29. Effect of temperature and thermal history on borosilicate glass structure10.1103/PhysRevB.85.054110 ↗
30. Boron coordination in sodium borosilicate glasses
31. Network modification in potassium borate glasses: structural studies with NMR and Raman spectroscopies10.1021/jp961439+ ↗
32. Short-range order in fused salts. I. Coordination states of nickel(II) in molten zinc chloride–potassium chloride mixtures10.1021/j100877a045 ↗
33. Structure of fast-ion-conducting AgI-doped borate glasses in bulk and thin film forms10.1103/PhysRevB.60.3885 ↗
34. Probing of bonding changes in B2O3 glasses at high pressure with inelastic X-ray scattering10.1038/nmat1511 ↗
35. Structure-energy map of alkali borosilicate glasses: Effects of pressure and temperature10.1103/PhysRevB.76.014202 ↗
36. Structural response of a highly viscous aluminoborosilicate melt to isotropic and anisotropic compressions10.1063/1.3223282 ↗
37. Irreversibility of pressure induced boron speciation change in glass
38. Fischer-Cripps · 2004
39. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
40. Alternative technique for analyzing instrumented indentation data10.1557/JMR.2001.0441 ↗
41. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
42. Experimental determination of the effective indenter shape and e-factor for nanoindentation by continuously measuring the unloading stiffness10.1557/jmr.2011.245 ↗
43. A new method for analyzing data from continuous depth-sensing microindentation tests10.1557/JMR.1990.0123 ↗
44. Shrinkage behavior of Knoop indentations in silica and soda–lime–silica glasses10.1111/j.1151-2916.2001.tb00976.x ↗
45. Quantitative evaluation of indentation-induced densification in glass10.1557/jmr.2005.0418 ↗
46. Effects of indenter geometry on indentation-induced densification of soda–lime glass10.1557/jmr.2010.0287 ↗
47. Raman spectra and structure of natural glasses10.1016/0022-3093(84)90140-6 ↗
48. A density model for the lithium, sodium and potassium borosilicate glass systems
49. Raman spectroscopic investigation of sodium borosilicate glass structure10.1007/BF02402831 ↗
50. Vibrational study of thermally ion-exchanged sodium aluminoborosilicate glasses10.1016/j.jnoncrysol.2013.12.017 ↗
51. Pressure-induced silicon coordination and tetrahedral structural changes in alkali oxide-silica melts up to 12GPa; NMR, Raman, and infrared spectroscopy
52. Structure of alkali borosilicate glasses and melts according to Raman spectroscopy data10.1134/S1087659613020119 ↗
53. Advances in understanding the structure of borosilicate glasses: a Raman spectroscopy study10.2138/am.2009.3027 ↗
54. Multinuclear nuclear magnetic resonance and Raman investigation of sodium borosilicate glass structures
55. Lattice vibrational spectra of vitreous silica densified by pressure10.1016/0038-1098(72)90265-7 ↗
56. Effect of uniaxial stresses on silica glass structure investigated by IR spectroscopy10.1016/S0022-3093(98)00780-7 ↗
57. Raman study of silica glass under tensile stress
58. The effects of tensile stress on the Raman spectrum of silica glass10.1016/0022-3093(88)90292-X ↗
59. Elastic/plastic indentation damage in ceramics: the media/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
60. Fracture toughness determinations by indentation10.1111/j.1151-2916.1976.tb10991.x ↗
61. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
62. Equilibrium penny-like cracks in indentation fracture10.1007/BF00557479 ↗
63. Residual stress effects in sharp contact cracking — part 1: indentation fracture mechanics10.1007/BF00551043 ↗
64. Direct observation and analysis of indentation cracking in glasses and ceramics10.1111/j.1151-2916.1990.tb05119.x ↗
65. An evaluation of the advantages and limitations in simulating indentation cracking with cohesive zone finite elements10.1088/0965-0393/22/1/015011 ↗
66. A technique for measuring stresses in small spatial regions using cube-corner indentation: application to tempered glass plates10.1016/j.jeurceramsoc.2006.09.001 ↗
67. Indentation-based methods to assess fracture toughness for thin coatings10.1088/0022-3727/45/20/203001 ↗
68. Effect of densification on crack initiation under Vickers indentation test10.1016/j.jnoncrysol.2010.07.015 ↗
69. Evaluation of fracture toughness of small volumes by means of cube-corner nanoindentation10.1016/j.scriptamat.2012.01.033 ↗
70. Hill · 1950
71. Crack opening profiles of indentation cracks in normal and anomalous glasses10.1016/j.actamat.2003.09.014 ↗
72. A different type of indentation size effect10.1016/j.scriptamat.2008.07.026 ↗
73. Prediction of glass hardness using temperature-dependent constraint theory10.1103/PhysRevLett.105.115503 ↗
74. Micromechanics of crack nucleation during indentations10.1007/BF00611482 ↗
75. High-pressure effects on oxide glasses: I, densification in rigid state10.1111/j.1151-2916.1963.tb13776.x ↗