journal article·2023-02Open access

Elucidating the effect of Al2O3/SiO2 mass ratio upon SiO2-MnO-CaF2-Al2O3-based welding fluxes: Structural analysis and thermodynamic evaluation

Zhanjun Wang, Zuohong Li, Ming Zhong, Zushu Li, Cong Wang

Abstract

The effect of Al 2O 3/SiO 2 mass ratio has been fully investigated upon SiO 2-MnO-CaF 2-Al 2O 3 -based fluxes by examining weld metal and slag shell morphologies. It has been documented that flux viscosity could be significantly diminished by elevating the Al 2O 3/SiO 2 mass ratio from 0.1 to 0.6, after which only negligible changes are observed. The compositional dependence of flux behaviors has been elaborated by means of structural analysis via Fourier Transform Infrared spectroscopy, Raman spectroscopy and molecular dynamics simulation. The formation of [AlO 4]-tetrahedral units and Al-O-Si with weaker bond energy are encouraged, which is accompanied by the increased NBO/Si (non-bridging oxygen per [SiO 4] units) and decreased Q 3/Q 2 (X 3/X 2 ) to establish a depolymerized aluminosilicate network. Thermodynamic evaluations have also been performed, showcasing activity and excessive free energy variations to enrich the structural analysis. Gaining an insight into the physicochemical properties of fluxes from structural and thermodynamic analysis view is essential to empower fundamental understandings towards quality manufacturing.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Welding Techniques and Residual Stresses · Metal Extraction and Bioleaching

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Characterizing inclusions in the weld metal of EH36 shipbuilding steel processed by CaF2-30 wt pct TiO2 flux10.1007/s11663-022-02455-z ↗
2. TiO2-assisted microstructural variations in the weld metal of EH36 shipbuilding steel subject to high heat input submerged arc welding
3. Effect of FeOt content and CaO/SiO2 ratio on hydrogen dissolution in CaF2–CaO–SiO2-based welding fluxes10.1111/j.1551-2916.2012.05173.x ↗
4. High-temperature wettability and structure of the TiO2–MnO–SiO2–Al2O3 welding flux system10.1016/j.jnoncrysol.2015.10.009 ↗
5. Fine-tuning weld metal compositions via flux optimization in submerged arc welding: an overview
6. Probing microstructural evolution in weld metals subjected to varied CaF2–TiO2 flux cored wires under high heat input electro-gas welding
7. Bubble evolution behaviors induced by CaO–Al2O3–SiO2–CaF2 fluxes subjected to high heat input submerged arc welding10.1007/s11663-022-02598-z ↗
8. In situ modification of CaF2-SiO2-Al2O3-MgO flux applied in the aluminium-assisted transfer of titanium in the submerged arc welding of carbon steel: process mineralogy and thermochemical analysis10.3390/min12050604 ↗
9. Welding processes for aeronautics
10. Thermodynamic evaluation of element transfer behaviors for fused CaO-SiO2-MnO fluxes subjected to high heat input submerged arc welding10.1007/s11663-021-02221-7 ↗
11. Slag-metal equilibrium during submerged arc welding10.1007/BF02654325 ↗
12. Influence of TiO2/SiO2 and MnO on the viscosity and structure in the TiO2-MnO-SiO2 welding flux system10.1016/j.jnoncrysol.2013.08.010 ↗
13. Effect of SiO2/Al2O3 and TiO2/SiO2 ratios on the viscosity and structure of the TiO2-MnO-SiO2-Al2O3 welding flux system10.2355/isijinternational.54.2050 ↗
14. Insight into the viscosity–structure relationship of MnO-SiO2-MgO-Al2O3 fused submerged arc welding flux10.1007/s11663-022-02507-4 ↗
15. The effects of CaF2, basicity, and atmospheric conditions on the solubility of carbon and nitrogen in the CaO-SiO2-Al2O3-based slag system10.1007/s11663-012-9765-9 ↗
16. Crystallization behavior of CaF2-TiO2 fluxes geared towards high heat input submerged arc welding10.1016/j.jnoncrysol.2022.121716 ↗
17. Profiling inclusion characteristics in submerged arc welded metals of EH36 shipbuilding steel treated by CaF2-TiO2 fluxes10.1080/13621718.2022.2095589 ↗
18. Phosphorus transfer behaviors induced by CaF2-TiO2-CaO fluxes in EH36 shipbuilding steel subject to high heat input submerged arc welding10.1007/s11663-022-02607-1 ↗
19. Insight into the relationship between viscosity and structure of CaO-SiO2-MgO-Al2O3 molten slags10.1007/s11663-019-01660-7 ↗
20. A Raman and multinuclear 29Si, 27Al, and 19F NMR study on the structural roles of CaF2 in SiO2–CaO–Al2O3-based welding fluxes10.1007/s11663-021-02359-4 ↗
21. Effect of substituting CaO with BaO on the viscosity and structure of CaO-BaO-SiO2-MgO-Al2O3 slags10.1111/jace.15559 ↗
22. Viscosity-structure relationship of alkaline earth silicate melts containing manganese oxide and calcium fluoride10.1111/jace.16363 ↗
23. Topological understanding of thermal conductivity in synthetic slag melts for energy recovery: an experimental and molecular dynamic simulation study10.1016/j.actamat.2022.118014 ↗
24. The effect of CaO (MgO) on the structure and properties of aluminosilicate system by molecular dynamics simulation10.1016/j.molliq.2018.07.123 ↗
25. Structural investigation of phosphorus in CaO-SiO2-P2O5 ternary glass10.1007/s11663-017-0924-x ↗
26. SiO2 and CaF2 behavior during shielded metal arc welding and their effect on slag detachability of the CaO-CaF2-SiO2 type ENiCrFe-7-covered electrode10.1007/s11661-016-3629-x ↗
27. Effect of compositional variation in TiO2-based flux-cored arc welding fluxes on the thermo-physical properties and mechanical behavior of a weld zone10.1007/s11661-018-4624-1 ↗
28. Effect of Al2O3/SiO2 ratio on the viscosity and structure of slags10.2355/isijinternational.52.753 ↗
29. The science of arc welding
30. Review on effect of flux composition on its behavior and bead geometry in submerged arc welding (SAW)
31. Flux composition dependence of microstructure and toughness of submerged arc hsla weldments
32. Slag metal reactions in binary CaF2-metal oxide welding fluxes
33. FT-IR spectroscopic study on structure of CaO-SiO2 and CaO-SiO2-CaF2 slags10.2355/isijinternational.42.344 ↗
34. Effect of SiO2/Al2O3 and TiO2/SiO2 ratios on the viscosity and structure of the TiO2–MnO–SiO2–Al2O3 welding flux system10.2355/isijinternational.54.2050 ↗
35. Effect of fluorine and CaO/Al2O3 mass ratio on the viscosity and structure of CaO-Al2O3-based mold fluxes10.1111/jace.16322 ↗
36. Structure and properties of calcium aluminosilicate glasses10.1016/0022-3093(91)90468-L ↗
37. Viscosity and structure evolution of bearing-BaO slag melt with the low CaO/SiO2 mass ratio of 0.710.1111/jace.18110 ↗
38. Structural studies of silicate glasses and melts—applications and limitations of Raman spectroscopy
39. Relations between the anionic structure and viscosity of silicate melts-a Raman spectroscopic study
40. Raman spectroscopy of calcium aluminate glasses and crystals10.1016/0022-3093(83)90672-5 ↗
41. Raman spectroscopic study of the structural properties of CaO-MgO-SiO2-TiO2 slags10.1016/j.jnoncrysol.2013.06.003 ↗
42. Comparison of desulfurization mechanism in liquid CaO-SiO2 and MnO-SiO2: an ab initio molecular dynamics simulation10.1016/j.jallcom.2021.163008 ↗
43. Viscous flow and crystallization behaviors of P-bearing steelmaking slags with varying fluorine content10.2355/isijinternational.ISIJINT-2015-538 ↗
44. Effect of Al speciation on the structure of high-Al steels mold fluxes containing fluoride10.1111/jace.14444 ↗
45. Thermodynamic properties and structure of ternary silicate glass-forming melts: experimental studies and modeling10.1016/j.jnoncrysol.2006.10.087 ↗
46. Experimental investigation of the viscosities in CaO-SiO2-MgO-Al2O3 and CaO-SiO2-MgO-Al2O3-TiO2 slags10.1007/s11663-007-9087-5 ↗
47. Structure, viscosity, and crystallization of glass melt from molten blast furnace slag10.1111/ijag.15054 ↗