journal article·2005-07

Elastic moduli of open-cell cordierite foams

F.A. Costa Oliveira

Journal of Non-Crystalline Solids· Volume 351· Issue 19-20
Publisher page

Abstract

Abstract The elastic moduli of open-cell cordierite foams were measured as a function of their relative densities by an impulse excitation method. The values of Young’s modulus and shear modulus were found to be dependent upon both the relative density and the microstructure of the cell structure with the elastic moduli increasing with decreasing of porosity. The density exponent was found to be in reasonably good agreement with theoretical models that considered cell strut bending as a major deformation mode. The materials studied were found to contain closed cell faces, which seem to have an effect on the elastic behavior, particularly for foams with porosity lower than 80%. The values of Young’s modulus (1–5 GPa) and the shear modulus (0.6–2.5 GPa) depended on the relative density in accordance to the available theoretical models. However, surprisingly very low Poisson’s ratios were estimated suggesting that either the developed foams cannot be regarded as isotropic materials or the cellular architecture became re-entrant so that the cell struts protrude inward rather than outward. Also noted was that the Poisson’s ratio was independent of the density of the cordierite foams (within the experimental errors and the density range investigated) which is consistent with the theoretical predictions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · Elasticity and Material Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Saggio-Woyansky · Am. Ceram. Soc. Bull. · 1992 · 71 · 1674
2. Sepulveda · Am. Ceram. Soc. Bull. · 1997 · 76 · 61
3. Gibson · 1997
4. Vedula · J. Am. Ceram. Soc. · 1999 · 82 · 64910.1111/j.1151-2916.1999.tb01813.x ↗
5. Colombo · J. Am. Ceram. Soc. · 2001 · 84 · 224510.1111/j.1151-2916.2001.tb00996.x ↗
6. Brezny · J. Am. Ceram. Soc. · 1989 · 72 · 114510.1111/j.1151-2916.1989.tb09698.x ↗
7. Mukhopadhyay · J. Appl. Phys. · 2002 · 91 · 341510.1063/1.1448675 ↗
8. Colombo · 2002 · vols. 206–213 · 1913
9. Costa Oliveira · Brit. Ceram. Trans. · 2002 · 101 · 1410.1179/096797801225000815 ↗
10. Gibson · Proc. R. Soc. Lond. A · 1982 · 382 · 4310.1098/rspa.1982.0088 ↗
11. Maiti · Scripta Metall. · 1984 · 18 · 21310.1016/0036-9748(84)90510-6 ↗
12. Maiti · Acta Metall. · 1984 · 32 · 196310.1016/0001-6160(84)90177-9 ↗
13. Ashby · Metall. Trans. A · 1983 · 14A · 175510.1007/BF02645546 ↗
14. Rice · 1998
15. Pickup · Br. Ceram. Trans. · 1997 · 96 · 96
16. Lopes · Biomateriais · 2000 · 21 · 74910.1016/S0142-9612(99)00248-3 ↗
17. Costa Oliveira · 2004 · vols. 455&456
18. Standard test method for dynamic Young’s modulus, shear modulus, and Poisson’s ratio for advanced ceramics by impulse excitation of vibration, ASTM C 1259-94, Philadelphia, USA, 1994
19. Matos · 2004 · vols. 455&456
20. Colombo · Mater. Res. Innovations · 2002 · 6 · 26010.1007/s10019-002-0209-z ↗
21. Wagh · J. Mater. Sci. · 1991 · 26 · 386210.1007/BF01184983 ↗
22. Hagiwara · J. Am. Ceram. Soc. · 1987 · 70 · 81110.1111/j.1151-2916.1987.tb05632.x ↗
23. Colombo · J. Am. Ceram. Soc. · 1999 · 82 · 57310.1111/j.1151-2916.1999.tb01803.x ↗
24. Friis · J. Mater. Sci. · 1988 · 23 · 440610.1007/BF00551939 ↗
25. Lakes · J. Mater. Sci. · 1991 · 26 · 228710.1007/BF01130170 ↗