journal article·2023-03

Preparation of mesoporous La2Zr2O7 aerogel via non-alkoxide sol-gel process with different solvent systems

Gang Zhao, Liuying Huang, Yuxi Yu, Yu Wang, Yuangao Yan, Sa Zhang

Publisher page

Abstract

Mesoporous La 2Zr 2O 7 (LZO) aerogels were successfully prepared by combining the epoxide-mediated sol-gel method with non-alkoxide salts. Gelation was controlled by adding propylene oxide to the solution of nitrate. The effect of solvent systems of pure water, pure ethanol, and a mixture of water and ethanol on the sol-gel was investigated. Gels cannot be obtained using either pure water or mixed solvent systems. However, LZO aerogels synthesized with pure ethanol solvent exhibited a mesoporous structure with a surface area of 413.2 m 2 /g and an average pore size of 12.3 nm. The prepared LZO aerogels had an amorphous structure containing some organic components. After heat treatment, the organics were pyrolyzed and the LZO started to crystallize. At about 1000°C, the LZO transformed from fluorite structure to pyrochlore structure. In addition, LZO still maintains a good skeletal structure after calcined at 1000°C. Above 1200°C, the grains start to stick as well as the grain size increases significantly due to the sintering of nanocrystalline LZO grains. The surface area can be maintained at 149.6 m 2/g after heat treatment at 600°C and dropped to 9.3 m 2/g after 1400°C for 3h.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear materials and radiation effects · Layered Double Hydroxides Synthesis and Applications · Luminescence Properties of Advanced Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Radiation Tolerance of Complex Oxides10.1126/science.289.5480.748 ↗
2. Zirconates as New Materials for Thermal Barrier Coatings10.1111/j.1151-2916.2000.tb01506.x ↗
3. Thermal Stability of Lanthanum Zirconate Plasma-Sprayed Coating10.1111/j.1151-2916.2001.tb00962.x ↗
4. Solvothermal synthesis of perovskites and pyrochlores: crystallisation of functional oxides under mild conditions10.1039/b904702f ↗
5. The structure, thermal expansion coefficient and sintering behavior of Nd3+-doped La2Zr2O7 for thermal barrier coatings10.1016/j.jallcom.2008.09.161 ↗
6. Transmission electron microscopy analysis of a coated conductor produced by chemical deposition methods10.1016/j.actamat.2009.10.055 ↗
7. Preparation and characterization of bulk and nano particles of La2Zr2O7 and Nd2Zr2O7 by sol–gel method10.1016/S0167-577X(01)00564-X ↗
8. Ordered Mesoporous Alumina-Supported Metal Oxides10.1021/ja806429q ↗
9. Facile synthesis of ordered mesoporous γ-alumina monoliths via polymerization-based gel-casting10.1016/j.micromeso.2010.09.033 ↗
10. Template Synthesis and Adsorption Properties of Hierarchically Porous Zirconium Titanium Oxides10.1021/la804030h ↗
11. γ-Alumina as a Support for Catalysts: A Review of Fundamental Aspects10.1002/ejic.200500348 ↗
12. Synthesis, characterization and catalytic applications of organized mesoporous aluminas10.1080/01614940701804042 ↗
13. Gems of Chemistry and Physics: Macroporous Metal Oxides with 3D Order10.1002/1521-4095(200103)13:6<401::AID-ADMA401>3.0.CO;2-7 ↗
14. Mesoporous and Mesostructured Materials for Optical Applications10.1021/cm0110730 ↗
15. Nanozeolites: Synthesis, Crystallization Mechanism, and Applications10.1021/cm047908z ↗
16. Synthesis of mesoporous La2Zr2O7 with high surface area by combining epoxide-mediated sol-gel process and solvothermal treatment10.1016/j.micromeso.2016.07.020 ↗
17. Hydrothermal Synthesis and Characterization of La2M2O7 (M = Ti, Zr) Powders10.1016/S0025-5408(97)00242-0 ↗
18. Ionic conductivity studies of ultrafine-grained yttria stabilized zirconia polymorphs10.1016/S0167-2738(99)00103-4 ↗
19. Morphology and sintering behaviour of yttria stabilised zirconia (8-YSZ) powders synthesised by spray pyrolysis10.1016/j.ceramint.2004.01.010 ↗
20. Preparation of lanthanum zirconate nano-powders by Molten Salts method10.1016/j.jnoncrysol.2010.01.016 ↗
21. New sol-gel synthetic route to transition and main-group metal oxide aerogels using inorganic salt precursors10.1016/S0022-3093(01)00427-6 ↗
22. Influence of pH and temperature parameters on the sol-gel synthesis process of mesoporous ZrC nanopowder10.1016/j.ceramint.2022.05.367 ↗
23. A study of APC surfactant role on the surface characteristics, size and morphology improvements of synthesized mesoporous silica nanopowder through a sol-gel process10.1016/j.jallcom.2017.05.274 ↗
24. Sol-gel synthesis and characterization of B4C nanopowder10.1016/j.ceramint.2018.08.196 ↗
25. Syntheses of ZrC–SiC nanopowder via sol–gel method10.1016/j.ceramint.2015.09.073 ↗
26. Shrinkage and pore structure in preparation of carbon aerogels10.1007/s10971-011-2514-8 ↗
27. Carbon fiber reinforced carbon aerogel composites for thermal insulation prepared by soft reinforcement10.1016/j.matlet.2011.09.076 ↗
28. Improvement of ZrB2 nanopowder synthesis by sol-gel method via zirconium alkoxide/boric acid precursors10.1007/s10971-022-05788-y ↗
29. Synthesis and characterization of SiC nano powder with low residual carbon processed by sol–gel method10.1016/j.powtec.2011.12.045 ↗
30. New sol–gel synthetic route to transition and main-group metal oxide aerogels using inorganic salt precursors10.1016/S0022-3093(01)00427-6 ↗
31. Use of Epoxides in the Sol−Gel Synthesis of Porous Iron(III) Oxide Monoliths from Fe(III) Salts10.1021/cm0007611 ↗
32. Brinker · 1990
33. A Special Material or a New State of Matter: A Review and Reconsideration of the Aerogel10.3390/ma6030941 ↗
34. Synthesis of High-Surface-Area Alumina Aerogels without the Use of Alkoxide Precursors10.1021/cm048800m ↗
35. Synthesis of Monolithic Al2O3 with Well-Defined Macropores and Mesostructured Skeletons via the Sol−Gel Process Accompanied by Phase Separation10.1021/cm063051p ↗
36. Synthesis of well-defined hierarchical porous La2Zr2O7 monoliths via non-alkoxide sol–gel process accompanied by phase separation10.1016/j.micromeso.2015.08.031 ↗
37. Electrophoretic deposition of La2Zr2O7 coating in non-aqueous media on Cf/SiC substrate10.1016/j.surfcoat.2015.08.005 ↗
38. Glass-like thermal conductivity in ytterbium-doped lanthanum zirconate pyrochlore10.1016/j.actamat.2010.07.035 ↗
39. A Novel Chemical Route to Prepare La2Zr2O7 Pyrochlore10.1111/jace.12060 ↗
40. Study by Raman spectroscopy of order-disorder phenomena occurring in some binary oxides with fluorite-related structures10.1002/jrs.1250050208 ↗
41. Comparison of the force field in various pyrochlore families. I. The A2B2O7 oxides10.1016/0022-4596(83)90205-0 ↗
42. Order–Disorder Transition and Unconventional Thermal Conductivities of the (Sm1−xYbx)2Zr2O7 Series10.1111/j.1551-2916.2010.04113.x ↗
43. Preparation and thermophysical properties of CeO2 doped La2Zr2O7 ceramic for thermal barrier coatings10.1016/j.jallcom.2006.08.005 ↗