Particle seeding enhances interconnectivity in polymeric scaffolds foamed using supercritical CO2
Source abstract
Abstract
Foaming using supercritical CO(2) is a well-known process for the production of polymeric scaffolds for tissue engineering. However, this method typically leads to scaffolds with low pore interconnectivity, resulting in insufficient mass transport and a heterogeneous distribution of cells. In this study, microparticulate silica was added to the polymer during processing and the effects of this particulate seeding on the interconnectivity of the pore structure and pore size distribution were investigated. Scaffolds comprising polylactide and a range of silica contents (0-50 wt.%) were produced by foaming with supercritical CO(2). Scaffold structure, pore size distributions and interconnectivity were assessed using X-ray computed microtomography. Interconnectivity was also determined through physical measurements. It was found that incorporation of increasing quantities of silica particles increased the interconnectivity of the scaffold pore structure. The pore size distribution was also reduced through the addition of silica, while total porosity was found to be largely independent of silica content. Physical measurements and those derived from X-ray computed microtomography were comparable. The conclusion drawn was that the architecture of foamed polymeric scaffolds can be advantageously manipulated through the incorporation of silica microparticles. The findings of this study further establish supercritical fluid foaming as an important tool in scaffold production and show how a previous limitation can be overcome.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Foaming and Composites · Orthopaedic implants and arthroplasty · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Supercritical carbon dioxide: putting the fizz into biomaterials10.1098/rsta.2005.1687 ↗
2. Supercritical fluid technologies and tissue engineering scaffolds10.1016/j.cossms.2003.12.004 ↗
3. A new dimension to biomaterials10.1016/S1369-7021(07)70030-5 ↗
4. Scaffolds in tissue engineering bone and cartilage10.1016/S0142-9612(00)00121-6 ↗
5. Porous methacrylate scaffolds: supercritical fluid fabrication and in vitro chondrocyte responses10.1016/j.biomaterials.2003.10.023 ↗
6. Culture of organised cell communities10.1016/S0169-409X(98)00017-9 ↗
7. Surface modification of polymers for medical applications10.1016/0142-9612(94)90025-6 ↗
8. Precipitation casting of polycaprolactone for applications in tissue engineering and drug delivery10.1016/S0142-9612(03)00535-0 ↗
9. Porous poly(alpha-hydroxyacid)/bioglass (R) composite scaffolds for bone tissue engineering. I: preparation and in vitro characterisation10.1016/j.biomaterials.2003.10.082 ↗
10. Characterisation of microcellular foams produced from semi-crystalline PCL using supercritical carbon dioxide10.1016/j.eurpolymj.2006.07.022 ↗
11. Human osteoprogenitor growth and differentiation on synthetic biodegradable structures after surface modification10.1016/S8756-3282(01)00617-2 ↗
12. Novel approach to fabricate porous sponges of poly(d,l-lactic-co-glycolic acid) without the use of organic solvents10.1016/0142-9612(96)87284-X ↗
13. Open pore biodegradable matrices formed with gas foaming10.1002/(SICI)1097-4636(19981205)42:3<396::AID-JBM7>3.0.CO;2-E ↗
14. The influence of silica on pore diameter and distribution in PLA scaffolds produced using supercritical CO210.1007/s10856-008-3380-y ↗
15. Surface curvatures of trabecular bone microarchitecture10.1016/S8756-3282(01)00672-X ↗
16. Monitoring individual morphological changes over time in ovariectomized rats by in vivo micro-computed tomography10.1016/j.bone.2006.04.017 ↗
17. Parallel plate model for trabecular bone exhibits volume fraction-dependent bias10.1016/S8756-3282(00)00371-9 ↗
18. Direct three-dimensional morphometric analysis of human cancellous bone: microstructural data from spine, femur, iliac crest, and calcaneus10.1359/jbmr.1999.14.7.1167 ↗
19. Three-dimensional methods for quantification of cancellous bone architecture10.1016/S8756-3282(97)00007-0 ↗
20. Bone histomorphometry – standardization of nomenclature, symbols and units10.1002/jbmr.5650020617 ↗
21. A new method for the model-independent assessment of thickness in three-dimensional images10.1046/j.1365-2818.1997.1340694.x ↗
22. Trabecular bone pattern factor – a new parameter for simple quantification of bone microarchitecture10.1016/8756-3282(92)90078-B ↗
23. Quantification of bone microarchitecture with the structure model index10.1080/01495739708936692 ↗
24. The Conneulor – unbiased estimation of connectivity using physical dissectors under projection10.1016/8756-3282(93)90144-Y ↗
25. Quantification of connectivity in cancellous bone, with special emphasis on 3-D reconstructions10.1016/8756-3282(93)90245-6 ↗
26. Kinetics of in vivo bone deposition by bone marrow stromal cells into porous calcium phosphate scaffolds: an X-ray computed microtomography study10.1089/ten.2006.12.3449 ↗
27. Development of characterisation methodologies for macroporous materials10.1007/s10934-006-8042-1 ↗
28. Bulk and interface investigations of scaffolds and tissue-engineered bones by X-ray microtomography and X-ray microdiffraction10.1016/j.biomaterials.2007.01.022 ↗
29. Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds10.1016/j.biomaterials.2006.11.014 ↗