Biomechanical strategies to reach a compromise between stiffness and flexibility in hind femora of desert locusts
Source abstract
Abstract
Insect cuticle can reach a wide range of material properties, which is thought to be the result of adaptations to applied mechanical stresses. Biomechanical mechanisms behind these property variations remain largely unknown. To fill this gap, here we performed a comprehensive study by simultaneous investigation of the microstructure, sclerotization and the elasticity modulus of the specialized cuticle of the femora of desert locusts. We hypothesized that, considering their different roles in jumping, the femora of fore-, mid- and hind legs should be equipped with cuticles that have different mechanical properties. Surprisingly, our results showed that the hind femur, which typically bears higher stresses, has a lower elasticity modulus than the fore and mid femora in the longitudinal direction. This is likely due to the lower sclerotization and different microstructure of the hind femur cuticle. This allows for some deformability in the femur wall and is likely to reduce the risk of mechanical failure. In contrast to both other femora, the hind femur is also equipped with a set of sclerotized ridges that are likely to provide it with the required stiffness to withstand the mechanical loads during walking and jumping. This paper is one of only a few comprehensive studies on insect cuticle, which advances the current understanding of the relationship between the structure, material property and function in this complex biological composite. STATEMENT OF SIGNIFICANCE: Insect cuticle is a biological composite with strong anisotropy and wide ranges of material properties. Using an example of the femoral cuticle of desert locusts, we measured the elasticity modulus, microstructure and sclerotization level of the cuticle. Our results show that, although the hind femur withstands most of the stress during locomotion, it has a lower elasticity modulus than the fore and mid femora. This is likely to be a functional adaption to jumping, in order to allow small deformations of the femur wall and reduce the risk of material failure. Our results deepen the current understanding of the structure-material-function relationship in the complex insect cuticle.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Insect and Arachnid Ecology and Behavior · Adhesion, Friction, and Surface Interactions · Neurobiology and Insect Physiology Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. The structure and formation of the integument in insects
2. Richards · 1958 · 1
3. Neville · 1975
4. Biochemistry of insect cuticle10.1146/annurev.en.24.010179.000333 ↗
5. Functional diversity of resilin in Arthropoda10.3762/bjnano.7.115 ↗
6. Nanomechanical behaviors of cuticle of three kinds of beetle10.1016/S1672-6529(08)60087-6 ↗
7. Biomechanical factors in the adaptations of insect tibia cuticle10.1371/journal.pone.0159262 ↗
8. Cuticle sclerotization determines the difference between the elastic moduli of locust tibiae10.1016/j.actbio.2019.12.013 ↗
9. Evidence for a material gradient in the adhesive tarsal setae of the ladybird beetle Coccinella septempunctata10.1038/ncomms2576 ↗
10. Material structure, stiffness, and adhesion: why attachment pads of the grasshopper (Tettigonia viridissima) adhere more strongly than those of the locust (Locusta migratoria) (Insecta: Orthoptera)10.1007/s00359-006-0156-z ↗
11. Micromechanical properties of consecutive layers in specialized insect cuticle: the gula of Pachnoda marginata (Coleoptera, Scarabaeidae) and the infrared sensilla of Melanophila acuminata (Coleoptera, Buprestidae)10.1242/jeb.020164 ↗
12. Micromechanics of smooth adhesive organs in stick insects: pads are mechanically anisotropic and softer towards the adhesive surface10.1007/s00359-008-0314-6 ↗
13. Penetration mechanics of a beetle intromittent organ with bending stiffness gradient and a soft tip10.1126/sciadv.aao5469 ↗
14. Biomechanical strategies underlying the robust body armour of an aposematic weevil10.3389/fphys.2018.01410 ↗
15. Endocuticle sclerotisation increazes the mechanical stability of cuticle10.1039/C9SM01687B ↗
16. Femoral stiffness and jumping in grasshoppers and locusts10.1016/0022-1910(76)90070-6 ↗
17. Detailed three-dimensional visualization of resilin in the exoskeleton of arthropods using confocal laser scanning microscopy10.1111/j.1365-2818.2011.03523.x ↗
18. A simple, high-resolution, non-destructive method for determining the spatial gradient of the elastic modulus of insect cuticle10.1098/rsif.2018.0312 ↗
19. Micro-morphological adaptations of the wing nodus to flight behavior in four dragonfly species from the family Libellulidae (Odonata: Anisoptera)10.1016/j.asd.2018.01.003 ↗
20. Material heterogeneity of male genitalia reduces genital damage in a bushcricket during sperm removal behavior10.1007/s00114-020-01706-w ↗
21. Material properties of arthropod cuticles: the arthrodial membranes10.1007/BF00689417 ↗
22. Morphology and design of the extensible intersegmental membrane of the female migratory locust10.1016/S0040-8166(81)80017-1 ↗
23. The energetics of the jump of the locust Schistocerca gregaria10.1242/jeb.63.1.53 ↗
24. Muscle attachment related to cuticle architecture in Apterygota10.1242/jcs.4.2.541 ↗
25. The locust jump: III. Structural specializations of the metathoracic tibiae10.1242/jeb.67.1.29 ↗
26. The anatomy and innervation of locust skeletal muscle
27. The development of the locust jumping mechanism: II. Energy storage and muscle mechanics10.1242/jeb.118.1.327 ↗
28. Locust solid cuticle - a time sequence of mechanical properties10.1016/0022-1910(74)90158-9 ↗
29. How does a slender tibia resist buckling? Effect of material, structural and geometric characteristics on buckling behavior of the hindleg tibia in stick insect postembryonic development
30. Design and mechanical properties of insect cuticle10.1016/j.asd.2004.05.006 ↗
31. A novel stress distribution organ in the arthropod exoskeleton10.1016/j.asd.2010.05.002 ↗
32. A compromise reveals buckling resistance strategy of a naturally slender tibia10.1002/adts.201900051 ↗
33. Buckling failures in insect exoskeletons10.1088/1748-3190/11/1/016003 ↗
34. Too hard to swallow: a secret secondary defence of an aposematic insect10.1007/978-981-13-1117-8 ↗
35. Fatigue of insect cuticle
36. Insect wing damage: causes, consequences and compensatory mechanisms10.1242/jeb.215194 ↗
37. A buckling region in locust hindlegs contains resilin and absorbs energy when jumping or kicking goes wrong10.1242/jeb.068080 ↗