journal article·2022-04

3D-printed poly-4-hydroxybutyrate bioabsorbable scaffolds for nipple reconstruction

Xue Dong, Ishani D. Premaratne, Kemal Sariibrahimoglu, Skander Limem, Jeffrey Scott, Mariam Gadjiko, Nabih Berri, Paula Ginter, Jason A. Spector

Acta Biomaterialia· Volume 143
Publisher page

Abstract

Nearly all autologous tissue techniques and engineered tissue substitutes utilized for nipple reconstruction are hindered by scar contracture and loss of projection of the reconstructed nipple. The use of unprocessed costal cartilage (CC) as an internal support for the reconstructed nipple has not been widely adopted because of the excessively firm resultant construct. Herein we use a 3D-printed Poly-4-Hydroxybutyrate (P4HB) bioabsorbable scaffold filled with mechanically processed patient-derived CC to foster ingrowth of tissue in vivo to protect the regenerated tissue from contractile forces as it matures. After 6 months in vivo, newly formed spongy fibrovascular cartilaginous tissue was noted in processed CC filled 3D-printed scaffolds, which maintained significantly greater projection than reconstructions without scaffolds. Interestingly, 3D-printed P4HB scaffolds designed with an internal 3D lattice of P4HB filaments (without CC) displayed the fastest material absorption and vascularized adipose-fibrous tissue as demonstrated by SEM and histological analysis, respectively. Using 3D-printed P4HB scaffolds filled with either processed CC, a 3D P4HB lattice or no fills, we have engineered neo-nipples that maintain projection over time, while approximating the biomechanical properties of the native human nipple. We believe that this innovative 3D-printed P4HB nipple reconstruction scaffold will be readily translatable to the clinic. STATEMENT OF SIGNIFICANCE: Nearly all autologous tissue techniques and engineered tissue substitutes utilized for nipple reconstruction are hindered by scar contracture and substantial loss of projection of the reconstructed nipple, leading to significant patient dissatisfaction. Using 3D-printed P4HB scaffolds filled with either processed costal cartilage or 3D P4HB lattices, we have engineered neo-nipples that resist the forces induced by scar contracture, resulting in maintenance of neo-nipple projection over time and biomechanically approximating human nipples after 6 months in vivo implantation. This novel 3D-printed bioabsorbable P4HB scaffold will be readily translatable to the clinic to reconstruct nipples with patient-specific dimensions and long-lasting projection.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tissue Engineering and Regenerative Medicine · Reconstructive Surgery and Microvascular Techniques · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Assessment of long-term nipple projection: a comparison of three techniques10.1097/01.PRS.0000019716.27638.0D ↗
2. Nipple Reconstruction: a regenerative medicine approach using 3D-printed tissue scaffolds10.1089/ten.teb.2018.0253 ↗
3. Nipple reconstruction10.1016/j.cps.2006.11.009 ↗
4. Nipple-areola reconstruction: satisfaction and clinical determinants10.1097/00006534-200208000-00013 ↗
5. Patient satisfaction following nipple-areolar complex reconstruction and tattooing10.1016/j.bjps.2010.05.010 ↗
6. Nipple-areola complex reconstruction10.1097/PRS.0000000000004166 ↗
7. An Analysis of complication risk factors in 641 nipple reconstructions10.1111/tbj.12591 ↗
8. Nipple reconstruction: risk factors and complications after 189 procedures10.1007/s00238-013-0841-4 ↗
9. An outcome evaluation following postmastectomy nipple reconstruction using the C-V flap technique10.1097/SAP.0b013e3181c01290 ↗
10. Nipple-areola complex reconstruction techniques: A literature review10.1016/j.ejso.2016.01.003 ↗
11. Nipple Engineering: Maintaining Nipple Geometry with Externally Scaffolded Processed Autologous Costal Cartilage10.1016/j.bjps.2021.03.010 ↗
12. Poly(lactic acid) modifications10.1016/j.progpolymsci.2009.12.003 ↗
13. Textile properties of synthetic prolapse mesh in response to uniaxial loading10.1016/j.ajog.2016.03.023 ↗
14. Poly-4-hydroxybutyrate (Phasix™) mesh onlay in complex abdominal wall repair10.1007/s00464-020-07601-9 ↗
15. Medical applications of poly-4-hydroxybutyrate: a strong flexible absorbable biomaterial10.1016/S1369-703X(03)00040-8 ↗
16. The effect of molecular weight on the material properties of biosynthesized poly(4-hydroxybutyrate)10.1016/j.ijbiomac.2014.04.015 ↗
17. Customization of mass-produced parts by combining injection molding and additive manufacturing with Industry 4.0 technologies10.1016/j.repl.2015.09.004 ↗
18. Poly-4-hydroxybutyrate (P4HB): a new generation of resorbable medical devices for tissue repair and regeneration10.1515/bmt-2013-0009 ↗
19. Secondary nipple reconstruction using local flaps and AlloDerm10.1097/01.PRS.0000164490.99581.F9 ↗
20. Staged nipple reconstruction with vascularized SurgiMend acellular dermal matrix10.1097/PRS.0b013e3182131e74 ↗
21. A novel technique for nipple-areola complex reconstruction: the acellular dermal matrix onlay graft10.1097/PRS.0b013e3182419c68 ↗
22. The use of calcium hydroxylapatite for nipple projection after failed nipple-areolar reconstruction: early results10.1097/01.sap.0000168370.81333.97 ↗
23. Filler injection enhances the projection of the reconstructed nipple: an original easy technique10.1007/s00266-004-0145-y ↗
24. A new method for using a silicone rod for permanent nipple projection after breast reconstruction procedures10.1016/j.breast.2010.10.001 ↗
25. Nipple-areola reconstruction with a dermal-fat flap: technical improvement from rolled auricular cartilage to artificial bone10.1097/01.PRS.0000091243.42112.32 ↗
26. Nipple reconstruction using rib cartilage strut in microsurgical reconstructed breast10.1016/j.anplas.2017.02.002 ↗
27. Patient satisfaction following nipple reconstruction incorporating autologous costal cartilage10.1177/229255030801600207 ↗
28. Nipple reconstruction using the modified top hat flap with banked costal cartilage graft: long-term follow-up in 58 patients10.1097/SAP.0b013e318048573c ↗
29. Synthetic biodegradable functional polymers for tissue engineering: a brief review10.1007/s11426-014-5086-y ↗
30. Current development of biodegradable polymeric materials for biomedical applications10.2147/DDDT.S165440 ↗
31. Dual extrusion patterning drives tissue development aesthetics and shape retention in 3D printed nipple-areola constructs10.1002/adhm.202101249 ↗
32. PCL-based composite scaffold matrices for tissue engineering applications10.1007/s12033-018-0084-5 ↗
33. 3D printing in breast reconstruction: from bench to bed10.3389/fsurg.2021.641370 ↗
34. Computer-assisted 3-dimensional printing technology for immediate breast reconstruction after breast- conserving surgery
35. Transformation of breast reconstruction via additive biomanufacturing10.1038/srep28030 ↗
36. Update on the use of synthetic mesh in reconstructive and cosmetic breast surgery10.1007/s00266-020-01767-2 ↗
37. Microbial degradation of polyesters
38. Poly(4-Hydroxybutyrate): current state and perspectives10.3389/fbioe.2020.00257 ↗
39. Influence of depolymerases and lipases on the degradation of polyhydroxyalkanoates determined in langmuir degradation studies10.1002/admi.202000872 ↗
40. Foreign body reaction to biomaterials10.1016/j.smim.2007.11.004 ↗
41. K. Guo, D.P. Martin, Poly-4-Hydroxybutyrate (P4HB) in biomedical applications and tissue engineering. In: CCC, ed. Biodegradable Polymers Volume 2. Vol 2. ebook: Nova Science Publishers; 2015.
42. Applications of polyhydroxyalkanoates in the medical industry
43. Characterization of poly-4-hydroxybutyrate mesh for hernia repair applications10.1016/j.jss.2013.03.044 ↗
44. Characterization of host response, resorption, and strength properties, and performance in the presence of bacteria for fully absorbable biomaterials for soft tissue repair10.1007/s10029-017-1638-3 ↗
45. The application of polyhydroxyalkanoates as tissue engineering materials10.1016/j.biomaterials.2005.04.036 ↗
46. Adipose tissue and extracellular matrix development by injectable decellularized adipose matrix loaded with basic fibroblast growth factor10.1097/PRS.0000000000002019 ↗
47. Q. Lu, M. Li, Y. Zou, T. Cao, Delivery of basic fibroblast growth factors from heparinized decellularized adipose tissue stimulates potent de novo adipogenesis. J. Control Release. 2014 Jan 28;174:43-50. doi:10.1016/j.jconrel.2013.11.007.10.1016/j.jconrel.2013.11.007 ↗
48. Tissue engineering tools for modulation of the immune response10.2144/000113754 ↗
49. Inflammation in cardiovascular tissue engineering: the challenge to a promise: a minireview
50. Long-term predictable nipple projection following reconstruction10.1097/00006534-199910000-00012 ↗
51. 2018-2020 Plastic surgery procedural statistics from the American Society of Plastic Surgeons. https://www.plasticsurgery.org/news/plastic-surgery-statistics.