journal article·2022-04

Ionic interaction-driven switchable bactericidal surfaces

Yifeng Ni, Dong Zhang, Shuguang Wang, Jingfeng Yuan, Lingbin Che, Dongyong Sha, Md Fauzul Kabir, Si Yu Zheng, Jun Tan, Jintao Yang

Acta Biomaterialia· Volume 142
Publisher page

Abstract

Bacteria in the external environment inevitably invade the wound and subsequently colonize the wound surface during surgery and biomedical operations, which slows down the process of wound healing and tissue repair; this poses a significant threat to human health. Therefore, the development of an intelligent antibacterial surface has become the focus of research in the field of antimicrobial strategies, which has important social and economic significance. Here, we present a simple approach of producing an ionic interaction-driven anionic activation substratum which is then functionalized with cationic molecules through coulombic interactional immobilization. The switchable multifunctional antibacterial surface can decrease bacterial attachment and inactivate the attached microorganisms, thus overcoming the conventional challenge for antibacterial surfaces. Briefly, poly (3-sulfopropyl methacrylate potassium salt) (PSPMA) brushes were constructed by surface-initiated atom transfer radical polymerization on silicon or cotton fabric substrates, and a positive-charged component, namely lysozyme (LYZ), hexadecyl trimethyl ammonium bromide (CTAB) or chitosan (CS), was loaded on negative-charged sulfonate groups through electrostatic interactions. The resultant brush-grafted surfaces exhibited more than ∼95.5% bactericidal efficacy and ∼92.8% release rate after the introduction of an adequate amount of contra-ions (1.0 M; Na+ & Cl-) against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, thus achieving a regenerated surface through the cyclic process of "assembly-dissociation". Smart cotton fabric (Fabric-PSPMA/LYZ and Fabric-PSPMA/CS) surfaces were constructed, which were found to promote wound epidermal tissue regeneration with a higher efficiency after 7-day in vivo studies. This ionic interaction-driven method used in the present work is simple and can reversibly renew antibacterial surfaces, which will help in the wider utilization of switchable antibacterial materials with a more ecologic and economic significance. STATEMENT OF SIGNIFICANCE: Smart antibacterial surfaces with renewable characteristics have attracted considerable interests over the past few years. Here, we used ionic interaction-driven force to manipulate dynamic conformational changes in PSPMA surface brushes, accompanied by highly switchable bacteria killing and bacteria releasing behaviors. Different cationic molecules were also designed for assembly/dissociation on the PSPMA-modified surfaces, and the essential parameters, including chemical structures, molecular weight, and cationic charge density, were investigated. With the refined structural combinations and the balance of bacteria killing/bacteria releasing behaviors, smart cotton fabrics (e.g., Fabric-PSPMA/lysozyme and Fabric-PSPMA/chitosan) were designed that could promote wound healing and tissue repair. These results contribute to the fundamental understanding of a switchable cationic-anionic pair design and the corresponding practical, renewable, highly antibacterial fabric.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Antimicrobial agents and applications · Polymer Surface Interaction Studies · Surgical Sutures and Adhesives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Peptidomimetic polyurethanes disrupt surface established bacterial biofilms and prevent biofilm formation10.1021/jacs.1c02324 ↗
2. Physical methods for controlling bacterial colonization on polymer surfaces10.1016/j.biotechadv.2020.107586 ↗
3. Biomaterial surfaces self-defensive against bacteria by contact transfer of antimicrobials10.1016/j.biomaterials.2019.03.006 ↗
4. Extraction and characterization of stratified extracellular polymeric substances in geobacter biofilms10.1016/j.biortech.2018.12.100 ↗
5. Multifunctional antimicrobial nanofibre dressings containing ε-polylysine for the eradication of bacterial bioburden and promotion of wound healing in critically colonized wounds10.1021/acsami.9b21683 ↗
6. How microbes read the map: effects of implant topography on bacterial adhesion and biofilm formation
7. Nanotechnology-based antimicrobials and delivery systems for biofilm-infection control10.1039/C7CS00807D ↗
8. A universal coating strategy for controllable functionalized polymer surfaces10.1002/adfm.202004633 ↗
9. A review of the recent advances in antimicrobial coatings for urinary catheters10.1016/j.actbio.2016.11.070 ↗
10. Micro- and macroscopically structured zwitterionic polymers with ultralow fouling property10.1016/j.jcis.2020.05.122 ↗
11. Mesoporous silica supported silver-bismuth nanoparticles as photothermal agents for skin infection synergistic antibacterial therapy10.1002/smll.202000436 ↗
12. Salt- and thermo-responsive polyzwitterionic brush prepared via surface-initiated photoiniferter-mediated polymerization10.1016/j.apsusc.2018.04.112 ↗
13. Highly stretchable, self-adhesive, biocompatible, conductive hydrogels as fully polymeric strain sensors10.1039/D0TA07390C ↗
14. A general crosslinker strategy to realize intrinsic frozen resistance of hydrogels10.1002/adma.202104006 ↗
15. Light-triggered switching of reversible and alterable biofunctionality via β-cyclodextrin/azobenzene-based host-guest interaction10.1021/mz500568k ↗
16. Bacteria killing and release of salt-responsive, regenerative, double-layered polyzwitterionic brushes10.1016/j.cej.2017.09.142 ↗
17. Nonleaching bacteria-responsive antibacterial surface based on a unique hierarchical architecture10.1021/acsami.6b08436 ↗
18. Targeted release of tobramycin from a pH-responsive grafted bilayer challenged with S. aureus10.1021/bm501751v ↗
19. Electrically responsive surfaces: experimental and theoretical investigations10.1021/acs.accounts.6b00132 ↗
20. Integrating a thermoresponsive copolymer with host-guest interactions for fabricating molecular recognition surfaces10.1039/C4MH00081A ↗
21. A smart indwelling needle with on-demand switchable anticoagulant and hemostatic activity10.1039/C9MH01619H ↗
22. Smart antibacterial surfaces with switchable bacteria-killing and bacteria-releasing capabilities10.1021/acsami.7b13565 ↗
23. Fabrication of supramolecular bioactive surfaces via β-cyclodextrin-based host-guest interactions10.1021/acsami.8b12130 ↗
24. Integrating zwitterionic polymer and Ag nanoparticles on polymeric membrane surface to prepare antifouling and bactericidal surface via schiff-based layer-by-layer assembly10.1016/j.jcis.2017.09.071 ↗
25. Fabrication of polylysine based antibacterial coating for catheters by facile electrostatic interaction10.1016/j.cej.2018.10.160 ↗
26. Intrinsic pKa of nanofiltration membrane surfaces to assess fouling and cleaning behaviors induced by Foulant-membrane electrostatic interactions10.1021/acs.est.0c01846 ↗
27. A polymer nanocomposite coating with enhanced hydrophilicity, antibacterial and antibiofouling properties: role of polymerizable emulsifier/anionic ligand10.1016/j.cej.2019.122268 ↗
28. Preparation of a hydrophilic and antibacterial dual function ultrafiltration membrane with quaternized graphene oxide as a modifier10.1016/j.jcis.2019.12.017 ↗
29. Self-healing hydrogel with a double dynamic network comprising imine and borate ester linkages10.1021/acs.chemmater.9b01301 ↗
30. Self-adaptive antibacterial surfaces with bacterium-triggered antifouling-bactericidal switching properties10.1039/C9BM01666J ↗
31. Design of salt-responsive and regenerative antibacterial polymer brushes with integrated bacterial resistance, killing, and release properties10.1039/C9TB01313J ↗
32. Host-guest interaction-mediated photo/temperature dual-controlled antibacterial surfaces10.1021/acsami.0c21626 ↗
33. Mussel-inspired polymeric coatings to realize functions from single and dual to multiple antimicrobial mechanisms10.1021/acsami.0c16510 ↗
34. Antifouling and antibacterial properties constructed by quaternary ammonium and benzyl ester derived from lysine methacrylamide10.1021/acsami.9b06281 ↗
35. Micro/nano-structured TiO2 surface with dual-functional antibacterial effects for biomedical applications10.1016/j.bioactmat.2019.10.006 ↗
36. Polymer brush grafted antimicrobial peptide on hydroxyapatite nanorods for highly effective antibacterial performance
37. Silver nanoparticles with pH induced surface charge switchable properties for antibacterial and antibiofilm applications10.1039/C8TB02917B ↗
38. Light induced structuring of photosensitive polymer brushes10.1021/acsapm.9b00705 ↗
39. Functionalization of titanium implants with phase-transited lysozyme for gentle immobilization of antimicrobial lysozyme10.1016/j.apsusc.2018.05.024 ↗
40. The weak interaction of surfactants with polymer brushes and its impact on lubricating behavior10.1021/acs.macromol.5b01267 ↗
41. Lubrication mechanism of concentrated polymer brushes in solvents: effect of solvent quality and thereby swelling state10.1021/ma200340d ↗
42. Dense, highly hydrated polymer brushes via modified atom-transfer-radical-polymerization: structure, surface interactions, and frictional dissipation10.1021/ma5019439 ↗
43. Zwitterionic polymer-grafted superhydrophilic and superoleophobic silk fabrics for anti-oil applications10.1002/marc.202000162 ↗
44. 3D printing of artificial skin patches with bioactive and optically active polymer materials for anti-infection and augmenting wound repair
45. Nanoscale characteristics and antimicrobial properties of (SI-ATRP)-seeded polymer brush surfaces10.1021/acsami.9b09885 ↗
46. Swelling enhancement of polyelectrolyte brushes induced by external ions10.1039/C4SM00860J ↗
47. Intelligent self-healing superhydrophobic modification of cotton fabrics via surface-initiated ARGET ATRP of styrene10.1016/j.cej.2017.04.080 ↗
48. Green fabrication of amphiphilic quaternized β-chitin derivatives with excellent biocompatibility and antibacterial activities for wound healing10.1002/adma.201801100 ↗
49. Nature of the interaction of pyridines with OCS. A theoretical investigation10.3390/molecules25020416 ↗
50. Giant hyaluronan polymer brushes display polyelectrolyte brush polymer physics behavior10.1021/acsmacrolett.9b00530 ↗
51. Tuning ice nucleation with counterions on polyelectrolyte brush surfaces10.1126/sciadv.1600345 ↗
52. Parallel control over surface charge and wettability using polyelectrolyte architecture: effect on protein adsorption and cell adhesion10.1021/acsami.6b09481 ↗
53. Surface potential and roughness controlled cell adhesion and collagen formation in electrospun PCL fibers for bone regeneration10.1016/j.matdes.2020.108915 ↗
54. Nanotechnology-based antimicrobials and delivery systems for biofilm-infection control10.1039/C7CS00807D ↗
55. Absorbable thioether grafted hyaluronic acid nanofibrous hydrogel for synergistic modulation of inflammation microenvironment to accelerate chronic diabetic wound healing10.1002/adhm.202000198 ↗