Partially degradable Ti-Mg composites for biomedical applications: Recent advances and future perspectives
Source abstract
Abstract
Given the low elastic modulus, favorable bioactivity, and intrinsic biodegradability of Mg alloys, Ti-Mg composites comprising Mg embedded within a continuous Ti matrix are considered a promising alternative to conventional porous Ti alloys. During implantation, the Mg phase undergoes programmable degradation-mediated pore-formation, which synergistically promotes osseointegration and bone infiltration, while the retained Ti matrix provides mechanical support similar to that of porous Ti alloy implants. This review provides a comprehensive analysis of recent advancements in Ti-Mg composites, emphasizing their advantages as implant materials in terms of tunable microstructural architectures and performance optimization potential. First, advanced fabrication techniques, including powder metallurgy (PM), melt infiltration, and liquid metal dealloying (LMD), compatible with Ti-Mg composites are categorized and analyzed. Second, the macrostructure design principle and microstructural characteristics of Ti-Mg composites are reviewed. Subsequently, the corresponding properties of Ti-Mg composites-specifically, mechanical properties, degradation behavior, and both in vitro and in vivo biological evaluations-are systematically discussed. Finally, the challenges and future prospects of Ti-Mg composites are addressed. STATEMENT OF SIGNIFICANCE: Ti-Mg composites with partial degradation characteristics have emerged as a frontier research domain for next-generation bioactive metallic implants. The rapid evolution of advanced manufacturing technologies, particularly high-pressure solid-state sintering, additive manufacturing and liquid metal dealloying, has enabled unprecedented opportunities for biomimetic structural engineering, microstructure optimization, and performance enhancement in these hybrid systems. This review provides a comprehensive analysis of the processing-structure-property relationship in Ti-Mg composites, while critically evaluating current limitations and outlining potential development strategies. The aim of this work is to offer essential insights into bioactive metallic implants with region-specific degradation profiles, thereby facilitating their clinical translation through material innovation.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
2. A review of non-biodegradable alloys implantation induced inflammatory and immune cell responses10.1016/j.jallcom.2023.173086 ↗
3. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
4. Titanium-based alloys and composites for orthopedic implants applications: a comprehensive review10.1016/j.matdes.2024.112850 ↗
5. Commercially pure titanium (cp-Ti) versus titanium alloy (Ti6Al4V) materials as bone anchored implants - is one truly better than the other?10.1016/j.msec.2016.01.032 ↗
6. Design and mechanical properties of new β type titanium alloys for implant materials10.1016/S0921-5093(97)00808-3 ↗
7. The bone tissue compatibility of a new Ti–Nb–Sn alloy with a low Young’s modulus10.1016/j.actbio.2011.02.008 ↗
8. Elastic deformation behaviour of Ti–24Nb–4Zr–7.9Sn for biomedical applications10.1016/j.actbio.2006.11.002 ↗
9. The effect of hatch distance on the microstructure and mechanical properties of Ti15Mo prepared by selective laser melting10.1016/j.jallcom.2024.177877 ↗
10. Powder metallurgy with space holder for porous titanium implants: a review10.1016/j.jmst.2020.11.005 ↗
11. Porous scaffold design for tissue engineering10.1038/nmat1421 ↗
12. Porous tantalum structures for bone implants: fabrication, mechanical and in vitro biological properties10.1016/j.actbio.2010.01.046 ↗
13. Current status on clinical applications of magnesium-based orthopaedic implants: a review from clinical translational perspective10.1016/j.biomaterials.2016.10.017 ↗
14. Biodegradable Mg alloys for orthopedic implants – a review10.1016/j.jma.2021.06.024 ↗
15. Implant-derived magnesium induces local neuronal production of CGRP to improve bone-fracture healing in rats10.1038/nm.4162 ↗
16. A comprehensive review on biocompatible Mg-based alloys as temporary orthopaedic implants: current status, challenges, and future prospects10.1016/j.jma.2021.09.005 ↗
17. Dietary reference intakes for energy, carbohydrate, fiber, fat, fatty acids, cholesterol, protein and amino acids10.1016/S0002-8223(02)90346-9 ↗
18. Magnesium and osteoporosis: current state of knowledge and future research directions10.3390/nu5083022 ↗
19. Multifunctions of dual Zn/Mg ion co-implanted titanium on osteogenesis, angiogenesis and bacteria inhibition for dental implants10.1016/j.actbio.2016.11.067 ↗
20. Improved the in vitro cell compatibility and apatite formation of porous Ti6Al4V alloy with magnesium by plasma immersion ion implantation10.1016/j.matlet.2017.05.088 ↗
21. Surface modification of titanium implants with Mg-containing coatings to promote osseointegration10.1016/j.actbio.2023.07.048 ↗
22. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications10.1016/j.msec.2019.04.064 ↗
23. A new look at biomedical Ti-based shape memory alloys10.1016/j.actbio.2012.01.018 ↗
24. Effect of torsion deformation and electric pulse treatment on transformation behaviour and superelasticity of Ti-50.8 at.% Ni wire10.1016/j.matdes.2022.110594 ↗
25. A novel biodegradable Mg-1Zn-0.5Sn alloy: mechanical properties, corrosion behavior, biocompatibility, and antibacterial activity10.1016/j.jma.2020.02.008 ↗
26. Powder metallurgical low-modulus Ti–Mg alloys for biomedical applications10.1016/j.msec.2015.06.010 ↗
27. Formation of a metastable fcc phase and high Mg solubility in the Ti-Mg system by mechanical alloying10.1016/j.powtec.2020.07.053 ↗
28. Critical review of Mg matrix composite for bio-implants through powder metallurgy
29. Effective parameters on the final properties of NiTi-based alloys manufactured by powder metallurgy methods: a review10.1016/j.pmatsci.2020.100739 ↗
30. Processing of interpenetrating Mg–TiNi composites by spark plasma sintering10.1016/j.msea.2014.11.092 ↗
31. Powder metallurgical Ti-Mg metal-metal composites facilitate osteoconduction and osseointegration for orthopedic application
32. Effect of composition on in vitro degradability of Ti–Mg metal-metal composites10.1016/j.msec.2019.110327 ↗
33. Effects of addition of NH4HCO3 on pore characteristics and compressive properties of porous Ti-10%Mg composites10.1016/S1003-6326(11)60824-8 ↗
34. Partially biodegradable Ti Mg composites prepared by microwave sintering for biomedical application10.1016/j.matchar.2022.111748 ↗
35. Partially biodegradable Ti-based composites for biomedical applications subjected to intense and cyclic loading10.1016/j.jallcom.2020.155663 ↗
36. Bioactive Ti + Mg composites fabricated by powder metallurgy: the relation between the microstructure and mechanical properties10.1016/j.jmbbm.2018.10.008 ↗
37. Titanium–magnesium based composites: mechanical properties and in-vitro corrosion response in Ringer's solution10.1016/j.msea.2013.02.040 ↗
38. Ultrafine-grained porous titanium and porous titanium/magnesium composites fabricated by space holder-enabled severe plastic deformation10.1016/j.msec.2015.10.070 ↗
39. Synthesis and mechanical characterisation of an ultra-fine grained Ti-Mg composite10.3390/ma9080688 ↗
40. Fabrication of high strength, antibacterial and biocompatible Ti-5Mo-5Ag alloy for medical and surgical implant applications10.1016/j.msec.2019.110165 ↗
41. Microstructure and mechanical properties of bimodal Ti-Bi alloys fabricated by mechanical alloying and spark plasma sintering for biomedical applications10.1016/j.matchar.2020.110134 ↗
42. Mechanical and biological properties of Ti–15%Mo-cenosphere porous composite sintered by SPS10.1016/j.ceramint.2024.02.120 ↗
43. Simultaneous sintering of low-melting-point Mg with high-melting-point Ti via a novel one-step high-pressure solid-phase sintering strategy10.1016/j.jallcom.2020.158344 ↗
44. Mg-Ti composites fabricated by a novel one-step high-pressure sintering: the correlation between microstructures and mechanical properties
45. A primary study of the corrosion behavior and superior structure stability of Mg–Ti composites fabricated by high-pressure solid-state sintering10.1016/j.jmrt.2021.09.005 ↗
46. Effect of applied pressure during solidification on the microstructural refinement in an Al Cu alloy10.1016/0956-716X(94)90453-7 ↗
47. The melting temperature of magnesium under shock loading10.1063/1.323789 ↗
48. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
49. High entropy alloys synthesized by mechanical alloying: a review
50. Solid solution of Mg in Ti by mechanical alloying10.1016/0167-577X(95)00265-0 ↗
51. Synthesis of Mg-Ti alloy by mechanical alloying10.1023/A:1022889100360 ↗
52. Mechanical alloying of Ti-20Ta-20Nb-(10÷20) Mg alloys10.12693/APhysPolA.126.871 ↗
53. Characteristics of Ti-Nb-Mg alloy by powder metallurgy for biomedical applications10.1016/j.matchar.2021.110953 ↗
54. Stimulation of in vitro and in vivo osteogenesis by Ti-Mg alloys with the sustained-release function of magnesium ions10.1016/j.colsurfb.2020.111360 ↗
55. Synthesis and characterization of mechanical-alloyed Ti–xMg alloys10.1016/S0925-8388(01)02027-8 ↗
56. Metastable orthorhombic phases at ambient pressure in mechanically milled pure Ti and Ti–Mg10.1016/j.scriptamat.2014.08.024 ↗
57. Characterization of mechanically alloyed f.c.c. Ti–Mg-based powders10.1016/j.powtec.2010.11.023 ↗
58. Effect of process control agent (PCA) on the characteristics of mechanically alloyed Ti-Mg powders
59. Mechanical alloying by ball milling of Ti and Mg elemental powders: operation condition considerations10.1016/j.jallcom.2009.11.184 ↗
60. Synthesis process of Mg–Ti BCC alloys by means of ball milling10.1016/j.jallcom.2009.06.140 ↗
61. Synthesis of a lightweight Ti–10Al–5Mg (wt.%) alloy by mechanical alloying followed by compaction and sintering10.1007/s10853-007-1663-1 ↗
62. A novel method to fabricate reinforced Ti composites by infiltration of Al (Mg) into porous titanium10.1016/j.jallcom.2017.05.014 ↗
63. High damping capacity of AlSi10Mg-NiTi lattice structure interpenetrating phase composites prepared by additive manufacturing and pressureless infiltration10.1016/j.jallcom.2022.164075 ↗
64. Polymer/metal composite 3D porous bone tissue engineering scaffolds fabricated by additive manufacturing techniques: a review
65. Wettability of pure Ti by molten pure Mg droplets10.1016/j.actamat.2009.09.039 ↗
66. A comparative study on biodegradation and mechanical properties of pressureless infiltrated Ti/Ti6Al4V–Mg composites10.1016/j.jmbbm.2016.06.026 ↗
67. Study on titanium-magnesium composites with bicontinuous structure fabricated by powder metallurgy and ultrasonic infiltration10.1016/j.jmbbm.2018.02.017 ↗
68. Porous titanium with entangled structure filled with biodegradable magnesium for potential biomedical applications10.1016/j.msec.2014.11.014 ↗
69. Mechanical degradation of porous titanium with entangled structure filled with biodegradable magnesium in Hanks' solution10.1016/j.msec.2015.08.008 ↗
70. 3D entangled wire reinforced metallic composites10.1016/j.msea.2012.03.058 ↗
71. Fabrication of Ti + Mg composites by three-dimensional printing of porous Ti and subsequent pressureless infiltration of biodegradable Mg10.1016/j.msec.2019.110478 ↗
72. Design of titanium alloys by additive manufacturing: a critical review
73. Additive manufacturing of metals: microstructure evolution and multistage control10.1016/j.jmst.2021.06.011 ↗
74. Microstructure tailoring in laser powder bed fusion (L-PBF): strategies, challenges, and future outlooks10.1016/j.jallcom.2023.172564 ↗
75. Characteristics of β-type Ti-41Nb alloy produced by laser powder bed fusion: microstructure, mechanical properties and in vitro biocompatibility10.1016/j.jmst.2022.02.026 ↗
76. Mechanical anisotropy of laser powder bed fusion fabricated Ti-41Nb alloy using pre-alloyed powder: roles played by grain morphology and crystallographic orientation10.1016/j.jallcom.2022.166572 ↗
77. Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: a review
78. Additive manufacturing of titanium-based lattice structures for medical applications – a review10.1016/j.bprint.2023.e00267 ↗
79. Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: current status and outstanding challenges10.1016/j.cossms.2018.05.002 ↗
80. Regulated multi-scale mechanical performance of functionally graded lattice materials based on multiple bioinspired patterns10.1016/j.matdes.2022.111564 ↗
81. Pore-gradient Ti6Al4V alloy mimicking the properties of human cortical bones: the design of TPMS structures by selective laser melting10.1016/j.msea.2024.147220 ↗
82. A novel hybrid design and modelling of a customised graded Ti-6Al-4V porous hip implant to reduce stress-shielding: an experimental and numerical analysis10.3389/fbioe.2023.1092361 ↗
83. 3D printed Mg-NiTi interpenetrating-phase composites with high strength, damping capacity, and energy absorption efficiency10.1126/sciadv.aba5581 ↗
84. Degradation behavior of biomedical partially degradable Ti–Mg composite fabricated by 3D printing and pressureless infiltration10.1016/j.jmrt.2024.02.059 ↗
85. Bi-continuous Mg-Ti interpenetrating-phase composite as a partially degradable and bioactive implant material10.1016/j.jmst.2022.11.011 ↗
86. On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures10.1038/s41467-022-30873-9 ↗
87. Compressive properties of 3-D printed Mg–NiTi interpenetrating-phase composite: effects of strain rate and temperature10.1016/j.compositesb.2021.108783 ↗
88. The mechanical properties and bioactivity of Ti–Mg composites as orthopedic implants: a pilot study10.1016/j.jmrt.2023.12.068 ↗
89. Effect of acid-etching 3D printed Ti templates on mechanical properties and corrosion resistance of Mg alloy scaffolds with different pore geometries10.1016/j.jallcom.2024.177002 ↗
90. Fabrication of graded porous titanium–magnesium composite for load-bearing biomedical applications10.1016/j.matdes.2014.12.001 ↗
91. Tuning microstructure and mechanical properties of open porous TiNb and TiFe alloys by optimization of dealloying parameters10.1016/j.scriptamat.2018.05.029 ↗
92. Liquid metal dealloying of titanium-tantalum (Ti-Ta) alloy to fabricate ultrafine Ta ligament structures: a comparative study in molten copper (Cu) and Cu-based alloys10.1016/j.corsci.2020.108600 ↗
93. The enabling role of dealloying in the creation of specific hierarchical porous metal structures—a review10.1016/j.corsci.2018.02.013 ↗
94. Liquid metals dealloying as a general approach for the selective extraction of metals and the fabrication of nanoporous metals: a review
95. Comprehensive study of sub-micron porous titanium-zirconium scaffolds fabricated by liquid metal dealloying10.1016/j.jallcom.2024.177137 ↗
96. Open porous dealloying-based biomaterials as a novel biomaterial platform10.1016/j.msec.2018.03.008 ↗
97. Dealloying by metallic melt10.1016/j.matlet.2011.01.054 ↗
98. Anomalously low modulus of the interpenetrating-phase composite of Fe and Mg obtained by liquid metal dealloying10.1016/j.scriptamat.2019.01.017 ↗
99. Hierarchical heterostructured FeCr–(Mg–Mg2Ni) composite with 3D interconnected and lamellar structures synthesized by liquid metal dealloying10.1016/j.jmrt.2021.10.080 ↗
100. Research progress of nanoporous metal prepared by dealloying in implantation field