Asymmetric mechanical behavior and pre-osteoblast differentiation in 3D printed Ti6Al4V-based triply periodic minimal surface bone-analogues: the role of pore topology
Source abstract
Abstract
The manufacturability of the cellular structure-based materials represents one of the most emerging themes in the additive manufacturing of medical implants and devices. This has been more relevant as natural bone possesses a unique porous architecture, which cannot be mimicked in conventional manufacturing. Despite recent advances, a critical knowledge gap persists in connecting scaffold topology and manufacturability with the mechano-biological responses, governed by asymmetric 3D pore structures. In this perspective, the present study focuses on laser powder bed fusion (L-PBF) of Schwarz diamond-based triply periodic minimal surface (SDW-TPMS) structures in Ti6Al4V, while varying unit cell size from 2.5 to 3.0 mm. The extensive micro-computed tomography analysis of 3D pore topology using customised design evaluation protocols established the efficacy of L-PBF-based optimised process parameters on dimensional tolerance and manufacturability of the TPMS structures. Intriguingly, an asymmetric mechanical response with a clinically relevant combination of the compressive elastic modulus (14-20 GPa), tensile elastic modulus (38 - 55 GPa), compressive strength (413-547 MPa), and tensile strength (325-475 MPa), together with unique 3D pore architecture, closely resembled the properties of human cortical bone. While correlating the anisotropic pore topology to the asymmetric mechanical response using the Gibson-Ashby model, the bendingdominated response was revealed with exponents of ∼1.5 in compression and ∼2.0 in tension. Furthermore, in vitro studies demonstrate MC3T3-E1 pre-osteoblasts' adhesion, proliferation, and maturation with modulation of early osteogenic markers and bone mineralisation, both quantitatively and qualitatively. The confocal microscopy observations revealed the cellular bridging, migration, and colonisation, indicating cytocompatibility. The present study conclusively establishes that SDW-TPMS structures offer a compelling combination of cortical bone-mimicking mechanical properties and a favourable biological response. It highlights their potential for reconstructive surgeries of load-bearing joints. STATEMENT OF SIGNIFICANCE: Conventional high-modulus metallic implants can induce periprosthetic bone resorption via stress shielding. While additively manufactured porous biomaterials address this, a robust structure-property-function paradigm has remained elusive. This study presents a Ti6Al4V based TPMS scaffold that achieves the biomechanical fidelity for load-bearing applications while providing a microenvironment suitable for differentiataion of pre-osteoblasts. The central innovation is our use of quantitative pore network modeling to establish a predictive link between the as-manufactured pore topology, the scaffold's pronounced tension-compression asymmetry, and its pro-osteogenic biological response. This work provides a validated framework for the rational design of next-generation bio-integrated orthopedic implants.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Basu · 2017 · 15
2. Basu · 2017
3. Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: current status and outstanding challenges10.1016/j.cossms.2018.05.002 ↗
4. Selective laser melting lattice structures: properties, performance, applications and challenges10.1016/j.matdes.2019.108137 ↗
5. Schoen · 1970 · 5541
6. Surface curvature in triply-periodic minimal surface architectures as a distinct design parameter in preparing advanced tissue engineering scaffolds10.1088/1758-5090/aa6553 ↗
7. Application of TPMS structure in bone regeneration10.1016/j.engreg.2021.09.004 ↗
8. Gaussian curvature–driven direction of cell fate toward osteogenesis with triply periodic minimal surface scaffolds10.1073/pnas.2206684119 ↗
9. Research on 3D printed titanium alloy scaffold structure induced osteogenesis: mechanics and in vitro testing
10. The manufacturability and compression properties of the Schwarz Diamond type Ti6Al4V cellular lattice fabricated by selective laser melting10.1007/s00170-019-04422-6 ↗
11. Energy absorption characteristics of TPMS-filled square tubes under quasi-static axial crushing10.1016/j.tws.2024.111811 ↗
12. Mechanical properties comparison of strut-based and triply periodic minimal surface lattice structures produced by electron beam melting
13. Designs and mechanical responses of 3D-printed Ti6Al4V porous structures based on triply periodic minimal surfaces with different iso-values10.1016/j.jmbbm.2024.106752 ↗
14. Quasi-static and fatigue performance of Ti-6Al-4V triply periodic minimal surface scaffolds manufactured via laser powder bed fusion for hard-tissue engineering10.1016/j.rineng.2024.103101 ↗
15. Design and compression behavior exploration of skeletal and sheet triply periodic minimal surface structures
16. Manufacturability and compression performance of Ti6Al4V alloy with triply periodic minimal surface structures fabricated by selective laser melting
17. Evaluation of fatigue life of additively manufactured Ti6Al4V Neovius lattices in simulated body fluid for biomedical applications10.1002/adem.202402368 ↗
18. Selective laser melting fabrication of porous Ti6Al4V scaffolds with triply periodic minimal surface architectures: structural features, cytocompatibility, and osteogenesis
19. On the morphological deviation in additive manufacturing of porous Ti6Al4V scaffold: a design consideration10.3390/ma15144729 ↗
20. The manufacturability and compression properties of the Schwarz Diamond type Ti6Al4V cellular lattice fabricated by selective laser melting10.1007/s00170-019-04422-6 ↗
21. Effect of lattice structure on mechanical properties of Ti-6Al-4V-Ta alloy for improved antibacterial properties10.3390/jmmp8040133 ↗
22. Characterization of pressure drop through Schwarz-Diamond triply periodic minimal surface porous media10.1016/j.ces.2023.119039 ↗
23. Construction of triply periodic minimal surfaces10.1098/rsta.1996.0093 ↗
24. Pore-throat structure characterization of carbon fiber reinforced resin matrix composites: employing Micro-CT and Avizo technique10.1371/journal.pone.0257640 ↗
25. Reconstruction and seepage simulation of a coal pore-fracture network based on CT technology10.1371/journal.pone.0252277 ↗
26. ASTM E8/E8M standard test methods for tension testing of metallic materials 1
27. “ISO 13314:2011 Mechanical testing of metals — Ductility testing — Compression test for porous and cellular metals,” 2011.
28. Architected cellular materials: a review on their mechanical properties towards fatigue-tolerant design and fabrication10.1016/j.mser.2021.100606 ↗
29. Additively manufactured cellular structures: impact of microstructure and local strains on the monotonic and cyclic behavior under uniaxial and bending load10.1016/j.jmatprotec.2013.03.013 ↗
30. Advances in 3D printed periodic lattice structures for energy research: energy storage, transport and conversion applications10.1016/j.matdes.2024.112773 ↗
31. Classification and selection of cellular materials in mechanical design: engineering and biomimetic approaches
32. Nature-inspired materials and structures using 3D printing10.1016/j.mser.2021.100609 ↗
33. Crystal-inspired cellular metamaterials and triply periodic minimal surfaces10.3390/biomimetics9050285 ↗
34. A topological twist on materials science10.1557/mrs.2014.28 ↗
35. A voxel-based method of multiscale mechanical property optimization for the design of graded TPMS structures10.1016/j.matdes.2021.109655 ↗
36. Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering10.1016/j.actbio.2019.05.046 ↗
37. Fracture toughness and tensile strength of 316L stainless steel cellular lattice structures manufactured using the selective laser melting technique10.1016/j.msea.2016.05.075 ↗
38. 3D-Printed Ti6Al4V scaffolds with graded triply periodic minimal surface structure for bone tissue engineering10.1007/s11665-021-05580-z ↗
39. Effect of unit cell rotation on mechanical performance of selective laser melted gyroid structures for bone tissue engineering
40. Mechanical characterisation and numerical modelling of TPMS-based gyroid and diamond Ti6Al4V scaffolds for bone implants: an integrated approach for translational consideration10.3390/bioengineering9100504 ↗
41. Strengthening mechanisms of minimal surface lattices with CT deviation10.1016/j.ijmecsci.2022.107932 ↗
42. Beautiful and functional: a review of biomimetic design in additive manufacturing
43. Novel 3D printed TPMS scaffolds: microstructure, characteristics and applications in bone regeneration10.1177/20417314241263689 ↗
44. Characterization of the effects of internal pores on tensile properties of additively manufactured austenitic stainless steel 316L10.1007/s11340-018-00465-0 ↗
45. Bioceramic scaffolds with triply periodic minimal surface architectures guide early-stage bone regeneration10.1016/j.bioactmat.2023.02.012 ↗
46. The mechanics of two-dimensional cellular materials10.1098/rspa.1982.0087 ↗
47. Tension-compression asymmetric mechanical behaviour of lattice cellular structures produced by selective laser melting10.1177/0954406220912786 ↗
48. Selective laser melted Ti6Al4V split-P TPMS lattices for bone tissue engineering10.1016/j.ijmecsci.2023.108353 ↗
49. Compressive mechanical compatibility of anisotropic porous Ti6Al4V alloys in the range of physiological strain rate for cortical bone implant applications10.1007/s10856-015-5565-5 ↗
50. Prediction of compressive behavior of laser-powder-bed fusion-processed TPMS lattices by regression analysis10.3390/jmmp8010016 ↗
51. Assessing the compressive and tensile properties of TPMS-gyroid and stochastic Ti64 lattice structures: a study on laser powder bed fusion manufacturing for biomedical implants
52. Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: three-dimensional micro-CT based structural analyses of porous bioactive titanium implants10.1016/j.biomaterials.2006.08.013 ↗
53. Properties and applications of additively manufactured metallic cellular materials: a review10.1016/j.pmatsci.2021.100918 ↗
54. Gyroid porous titanium structures: a versatile solution to be used as scaffolds in bone defect reconstruction10.1016/j.matdes.2017.11.050 ↗
55. Mechanical properties directionality and permeability of fused triply periodic minimal surface porous scaffolds fabricated by selective laser melting10.1021/acsbiomaterials.3c00214 ↗
56. Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting10.1016/j.ijmecsci.2018.08.039 ↗
57. Additively manufactured metallic porous biomaterials based on minimal surfaces: a unique combination of topological, mechanical, and mass transport properties10.1016/j.actbio.2017.02.024 ↗
58. Microstructural optimization and mechanical enhancement of Selective laser melting Ti6Al4V TPMS scaffolds through vacuum annealing treatment10.1016/j.jallcom.2022.167524 ↗
59. Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: current status and outstanding challenges10.1016/j.cossms.2018.05.002 ↗
60. Cao · ACS Biomater Sci Eng · 2025 · 11 · 71010.1021/acsbiomaterials.4c01661 ↗
61. Reconsidering osteoconduction in the era of additive manufacturing10.1089/ten.teb.2019.0047 ↗