journal article·2026-01

Dual-orientation of collagen fibers to guide cell alignment in 3D-printed constructs

Diya Singhal, Fotis Christakopoulos, Lucia G. Brunel, Suraj Borkar, Vanessa M. Doulames, Esther A.T. Mozipo, David Myung, Gerald G. Fuller, Sarah C. Heilshorn

Acta Biomaterialia· Volume 209
Publisher page

Abstract

Natural tissue comprises fibrous proteins with complex fiber alignment patterns. Here, we develop a reproducible method to fabricate biomimetic scaffolds with patterned fiber alignment along two independent orientations. While extrusion-based approaches are commonly used to align fibrous polymers in a single orientation parallel to the direction of flow, we hypothesized that extrusion-based 3D printing could be utilized to achieve more complex patterns of fiber alignment. Specifically, we show that control of lateral spreading of a printed filament can induce fiber alignment that is either parallel or perpendicular to the flow direction. Theoretical prediction of the printing parameters that control fiber orientation was experimentally validated using a collagen biomaterial ink. The velocity ratio of the printhead movement relative to the ink extrusion rate was found to dictate collagen fiber alignment, allowing for the informed fabrication of collagen scaffolds with prescribed patterns of fiber alignment. For example, controlled variation of the ink extrusion rate during a single print resulted in scaffolds with specified regions of both parallel and perpendicular collagen fiber alignment. Human corneal mesenchymal stromal cells seeded onto the printed scaffolds adopted a spread morphology that aligned with the underlying collagen fiber patterns. This technique worked well for filaments either printed onto a printbed in air or extruded within a support bath using embedded 3D printing, enabling the fabrication of 3D structures with aligned collagen fibers. Taken together, this work demonstrates a theoretical and experimental framework to achieve the reproducible fabrication of 3D printed structures with controlled collagen fiber patterns that guide cellular alignment. Statement of Significance Natural tissues contain collagen fibers aligned in multiple directions, which are essential for guiding cell behavior; however, most existing fabrication methods can achieve only unidirectional fiber alignment. Here, we introduce an extrusion-based 3D printing strategy that enables precise control over collagen fiber orientation in both parallel and perpendicular directions. This allows multidirectional collagen fiber alignment patterned spatially within a single construct, thereby guiding corneal mesenchymal stromal cells to align multidirectionally. This approach works when printing in air or with embedded printing in a support bath. Thus, this strategy can enable the fabrication of complex 3D scaffolds that mimic the anisotropic architecture of native tissues.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Collagen: Extraction and Characterization · Cellular Mechanics and Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Fibrous proteins and tissue engineering10.1016/S1369-7021(06)71742-4 ↗
2. Collective Cell Migration in a Fibrous Environment: A Hybrid Multiscale Modelling Approach10.3389/fams.2021.680029 ↗
3. Modeling the extracellular matrix in cell migration and morphogenesis: a guide for the curious biologist10.3389/fcell.2024.1354132 ↗
4. Liquid crystalline collagen: A self-assembled morphology for the orientation of mammalian cells10.1021/la803736x ↗
5. From nano to macro: Studying the hierarchical structure of the corneal extracellular matrix10.1016/j.exer.2014.07.018 ↗
6. Collagen Fibril Orientation Instructs Fibroblast Differentiation Via Cell Contractility10.1002/advs.202301353 ↗
7. Shear-induced alignment of collagen fibrils using 3D cell printing for corneal stroma tissue engineering10.1088/1758-5090/ab1a8b ↗
8. Picrosirius-Polarization Method for Collagen Fiber Detection in Tendons: A Mini-Review10.1111/os.12627 ↗
9. Dynamics of Tissue-Induced Alignment of Fibrous Extracellular Matrix10.1016/j.bpj.2017.06.046 ↗
10. Collagen as bioink for bioprinting: A comprehensive review10.18063/ijb.v6i3.270 ↗
11. Collagen-Based Biomaterials for Tissue Engineering10.1021/acsbiomaterials.2c00730 ↗
12. Tissue growth as a mechanism for collagen fiber alignment in articular cartilage10.1038/s41598-024-82441-4 ↗
13. An ultrastructural analysis of collagen in tissue engineered arteries10.1007/s10439-007-9340-8 ↗
14. Corneal collagen fibril structure in three dimensions: Structural insights into fibril assembly, mechanical properties, and tissue organization10.1073/pnas.111150598 ↗
15. Mechanical Design in Arteries10.1242/jeb.202.23.3305 ↗
16. Directional cues in the tumor microenvironment due to cell contraction against aligned collagen fibers10.1016/j.actbio.2021.04.053 ↗
17. Self-generated gradients steer collective migration on viscoelastic collagen networks10.1038/s41563-022-01259-5 ↗
18. Dynamically re-organized collagen fiber bundles transmit mechanical signals and induce strongly correlated cell migration and self-organization10.1002/anie.202016084 ↗
19. Spontaneous bone regeneration achieved through one-step alignment of human mesenchymal stem cell-embedded collagen10.1016/j.actbio.2025.03.007 ↗
20. Effect of scaffold morphology and cell co-culture on tenogenic differentiation of HADMSC on centrifugal melt electrospun poly (Llactic acid) fibrous meshes10.1088/1758-5090/aa8fb8 ↗
21. The effects of alignment and diameter of electrospun fibers on the cellular behaviors and osteogenesis of BMSCs10.1016/j.msec.2020.111787 ↗
22. Local extracellular matrix alignment directs cellular protrusion dynamics and migration through Rac1 and FAK10.1039/C6IB00030D ↗
23. Remodeling of aligned fibrous extracellular matrix by encapsulated cells under mechanical stretching10.1016/j.actbio.2020.05.027 ↗
24. The effect of nanofiber-guided cell alignment on the preferential differentiation of neural stem cells10.1016/j.biomaterials.2010.08.021 ↗
25. Smooth muscle cell alignment and phenotype control by melt spun polycaprolactone fibers for seeding of tissue engineered blood vessels
26. Microextrusion printing cell-laden networks of type i collagen with patterned fiber alignment and geometry10.1039/C8SM02605J ↗
27. Fabrication of macromolecular gradients in aligned fiber scaffolds using a combination of in-line blending and air-gap electrospinning10.1016/j.actbio.2016.12.041 ↗
28. Use of magnetically oriented orthogonal collagen scaffolds for hemi-corneal reconstruction and regeneration10.1016/j.biomaterials.2010.07.066 ↗
29. Local extensional flows promote long-range fiber alignment in 3D collagen hydrogels10.1088/1758-5090/ac7824 ↗
30. 3D collagen alignment limits protrusions to enhance breast cancer cell persistence10.1016/j.bpj.2014.10.035 ↗
31. Microengineering 3D collagen matrices with tumor-mimetic gradients in fiber alignment10.1002/adfm.202308071 ↗
32. Aligned electrospun fibers for neural patterning10.1007/s10529-017-2494-z ↗
33. Electrospinning Aligned SF/Magnetic Nanoparticles-Blend Nanofiber Scaffolds for Inducing Skeletal Myoblast Alignment and Differentiation10.1021/acsabm.4c01198 ↗
34. Fiber alignment and property direction dependency of FRC extrudate10.1016/S0008-8846(03)00108-X ↗
35. Directing collagen fibers using counter-rotating cone extrusion10.1016/j.actbio.2014.10.012 ↗
36. Collagen Fiber Orientation Regulates 3D Vascular Network Formation and Alignment10.1021/acsbiomaterials.8b00384 ↗
37. Marangoni flows drive the alignment of fibrillar cell-laden hydrogels10.1126/sciadv.aaz7748 ↗
38. Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels10.1126/sciadv.aaw2459 ↗
39. Recapitulating macro-scale tissue self-organization through organoid bioprinting10.1038/s41563-020-00803-5 ↗
40. Biofabricated Structures Reconstruct Functional Urinary Bladders in Radiation-Injured Rat Bladders10.1089/ten.tea.2017.0533 ↗
41. 3D bioprinting of collagen to rebuild components of the human heart10.1126/science.aav9051 ↗
42. 3D bioprinting of collagen-based high-resolution internally perfusable scaffolds for engineering fully biologic tissue systems10.1126/sciadv.adu5905 ↗
43. Three-Dimensional Bioprinting of Human Organs and Tissues: Bioethical and Medico-Legal Implications Examined through a Scoping Review10.3390/bioengineering10091052 ↗
44. Organoid bioprinting: from cells to functional tissues10.1038/s44222-024-00268-0 ↗
45. 3D bioprinting of tissues and organs10.1038/nbt.2958 ↗
46. Drawing and extrusion of semi-crystalline polymers10.1007/BF01412215 ↗
47. Hydrostatic extrusion of solid polymers - Part 5 Structure and molecular orientation of extruded polyethylene10.1007/BF00541391 ↗
48. Achieving molecular orientation in thermally extruded 3D printed objects10.1088/1758-5090/ab1d44 ↗
49. Stress-adapted fiber orientation along the principal stress directions for continuous fiber-reinforced material extrusion10.1007/s40964-022-00347-x ↗
50. Solid-state extrusion of nascent disentangled ultra-high molecular weight polyethylene10.1002/pen.26787 ↗
51. 3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties10.1038/srep43401 ↗
52. Large volume syringe pump extruder for desktop 3D printers10.1016/j.ohx.2018.02.001 ↗
53. 3D bioprinting of dynamic hydrogel bioinks enabled by small molecule modulators10.1126/sciadv.ade7880 ↗
54. Reproducible derivation and expansion of corneal mesenchymal stromal cells for therapeutic applications10.1167/tvst.9.3.26 ↗
55. Computational segmentation of collagen fibers from second-harmonic generation images of breast cancer10.1117/1.JBO.19.1.016007 ↗
56. Collagen-based bioinks for regenerative medicine: Fabrication, application and prospective
57. FRESH 3D Bioprinting of Collagen Types I, II, and III10.1021/acsbiomaterials.4c01826 ↗
58. Assembly of collagen into microribbons: Effects of pH and electrolytes10.1016/j.jsb.2004.07.001 ↗
59. Collagen fibrillogenesis in tendon development: Current models and regulation of fibril assembly10.1002/bdrc.20130 ↗
60. Type i collagen self-assembly: The roles of substrate and concentration10.1021/la3048104 ↗
61. Discovering design principles of collagen molecular stability using a genetic algorithm, deep learning, and experimental validation10.1073/pnas.2209524119 ↗
62. Enhancing polymer fiber orientation with 3D-printed shell–core structures10.1016/j.jnnfm.2024.105352 ↗
63. Why are soft collagenous tissues so tough?10.1126/sciadv.adw0808 ↗
64. Quantitative three-dimensional collagen orientation analysis of human meniscus posterior horn in health and osteoarthritis using micro-computed tomography10.1016/j.joca.2021.01.009 ↗
65. Multi-scale structural and tensile mechanical response of annulus fibrosus to osmotic loading10.1007/s10439-012-0525-4 ↗
66. Extrusion width critically affects fibre orientation in short fibre reinforced material extrusion additive manufacturing
67. Macosko · 1994
68. Influence of printing conditions on the extrudate shape and fiber orientation in extrusion deposition additive manufacturing10.1016/j.compositesb.2023.110793 ↗
69. Engineered assistive materials for 3D bioprinting: support baths and sacrificial inks10.1088/1758-5090/ac6bbe ↗
70. Aqueous Two-Phase Enabled Low Viscosity 3D (LoV3D) Bioprinting of Living Matter
71. One-step FRESH bioprinting of low-viscosity silk fibroin inks10.1021/acsbiomaterials.2c00269 ↗
72. Writing in the granular gel medium10.1126/sciadv.1500655 ↗
73. Embedded 3D bioprinting of collagen inks into mikrogel baths to control hydrogel microstructure and cell spreading
74. Suppression of Filament Defects in Embedded 3D Printing10.1021/acsami.2c08047 ↗
75. Stability of High Speed 3D Printing in Liquid-Like Solids10.1021/acsbiomaterials.6b00184 ↗
76. Collagens, suprastructures, and collagen fibril assembly
77. Mimicking the Hierarchical Organization of Natural Collagen: Toward the Development of Ideal Scaffolding Material for Tissue Regeneration10.3389/fbioe.2021.644595 ↗
78. Three-dimensional reconstruction of collagen-proteoglycan interactions in the mouse corneal stroma by electron tomography10.1016/j.jsb.2010.01.019 ↗
79. Human limbal biopsy-derived stromal stem cells prevent corneal scarring10.1126/scitranslmed.3009644 ↗
80. Cornea-Derived Mesenchymal Stromal Cells Therapeutically Modulate Macrophage Immunophenotype and Angiogenic Function10.1002/stem.2781 ↗
81. In situ UNIversal Orthogonal Network (UNION) bioink deposition for direct delivery of corneal stromal stem cells to corneal wounds
82. Multipotent stem cells in human corneal stroma10.1634/stemcells.2004-0256 ↗
83. Aldehyde dehydrogenase (ALDH) 3A1 expression by the human keratocyte and its repair phenotypes10.1016/j.exer.2006.05.011 ↗
84. 3D extrusion bioprinting10.1038/s43586-021-00073-8 ↗
85. Cellulose nanofibers and other biopolymers for biomedical applications. A review
86. Recent advances in designing fibrous biomaterials for the domain of biomedical, clinical, and environmental applications10.1021/acsbiomaterials.2c00786 ↗
87. Interpenetrating networks of fibrillar and amorphous collagen promote cell spreading and hydrogel stability10.1016/j.actbio.2025.01.009 ↗
88. Mechanical properties of aligned fibre composites
89. Fiber orientation and mechanical properties of short-fiber-reinforced injection-molded composites: Simulated and experimental results10.1002/pc.750140503 ↗
90. Cellulose nanowhiskers and fiber alignment greatly improve mechanical properties of electrospun prolamin protein fibers10.1021/am404624z ↗
91. Effect of fibre alignment on mechanical properties of natural fibre reinforced polymer composites
92. Highly aligned aramid nanofibrillar nanocomposites for enhanced dynamic mechanical properties10.1016/j.compositesb.2021.109467 ↗
93. Study on the effects of fiber orientation on the mechanical properties of natural fiber reinforced epoxy composite by finite element method10.1016/j.matpr.2020.12.614 ↗
94. Multi-layered hydrogels for biomedical applications
95. Continuously growing multi-layered hydrogel structures with seamless interlocked interface10.1016/j.matt.2021.11.018 ↗
96. Biomaterial guides for lymphatic endothelial cell alignment and migration10.1016/j.actbio.2010.10.016 ↗
97. Modulation of alignment and differentiation of skeletal myoblasts by submicron ridges/grooves surface structure10.1002/bit.22697 ↗
98. Alignment of skeletal muscle myoblasts and myotubes using linear micropatterned surfaces ground with abrasives10.1002/bit.22268 ↗
99. 3D printing of a reactive hydrogel bio-ink using a static mixing tool10.3390/polym12091986 ↗
100. Influence of print speed on the mechanical performance of 3D-printed bio-polymer polylactic acid10.3390/ma18081765 ↗