Bioinspired fabrication of 3D-printed composites based on multiscale and interfacial architecture of conch shells
Source abstract
Abstract
The intricate microstructure of conch shells endows them with high mechanical properties. However, it is challenging to integrate bionic design into engineering materials due to the microscopic visualization and complexity of the shell structure. In this study, interlayer separation was achieved by precisely removing the soft organic tissue, revealing an interface microstructure characterized by convex features and alternating orientations. Notably, this unique microstructure influences angular deflection and tangential displacement when cracks propagate across different macroscopic layers-a phenomenon not previously reported in the literature. To elucidate the energy dissipation and crack propagation mechanisms of the conch shell, quasi-static in situ indentation and in situ impact experiments were conducted. Inspired by the structural characteristics of the conch shell, a microstructure-guided 3D printing strategy was developed to fabricate a polylactic acid (PLA) skeleton. Subsequently, a silicone elastomer was injected into the PLA skeleton under high pressure and solidified, resulting in a rigid-flexible coupled bio-inspired composite with a multi-scale layered structure. The multi-level cross-layered architecture significantly alters the crack propagation path, and the impact toughness of the conch shell-inspired composite improves by 215 % compared to the 3D-printed homogeneous PLA. Furthermore, the introduction of microstructural design between layers enhanced the impact resistance of the composite by an additional 85 %. The fabrication process and structural design principles presented in this study are broadly applicable to the development of high-strength composites using a variety of material systems. STATEMENT OF SIGNIFICANCE: The exceptional mechanical performance of conch shells originates from their multiscale hierarchical architecture and unique interfacial microstructures. This study elucidates their crack-deflection mechanisms and develops an innovative bio-inspired 3D printing strategy for advanced composites. Our approach enables precise control of material heterogeneity and complex geometries, facilitating next-generation impact-resistant materials development. This research establishes a transformative paradigm for engineering lightweight, high-performance impact-resistant materials with potential applications in aerospace systems, ballistic armor, and protective gear design.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Transparent nacre-like composites toughened through mineral bridges10.1002/adfm.202002149 ↗
2. Energy-absorption characteristics of a bionic honeycomb tubular nested structure inspired by bamboo under axial crushing10.1016/j.compositesb.2018.10.095 ↗
3. Synthetic nacre by predesigned matrix-directed mineralization10.1126/science.aaf8991 ↗
4. “Subconsciousness-triggered” human body defensive strategy: Bi-stability intelligent joint with bionic kirigami structure10.1016/j.compositesb.2024.111368 ↗
5. Centrifugation and index matching yield a strong and transparent bioinspired nacreous composite10.1126/science.abf0277 ↗
6. Preparation and impact resistance performance of bionic sandwich structure inspired from beetle forewing10.1016/j.compositesb.2018.12.139 ↗
7. Mechanically efficient cellular materials inspired by cuttlebone10.1002/adma.202007348 ↗
8. A bionic solution to make cement matrix tough10.1016/j.cemconcomp.2022.104881 ↗
9. Hierarchical structure and compressive deformation mechanisms of bighorn sheep (Ovis canadensis) horn10.1016/j.actbio.2017.09.043 ↗
10. Equine hoof wall: structure, properties, and bioinspired designs10.1016/j.actbio.2022.08.028 ↗
11. Structural basis for the fracture toughness of the shell of the conch Strombus gigas10.1038/35016535 ↗
12. Growing recyclable and healable piezoelectric composites in 3D printed bioinspired structure for protective wearable sensor10.1038/s41467-023-41740-6 ↗
13. A study of a bio-inspired impact resistant carbon fiber laminate with a sinusoidal helicoidal structure in the mandibles of trap-jaw ants10.1016/j.actbio.2023.07.047 ↗
14. Conversion of bulk seashells to biocompatible hydroxyapatite for bone implants10.1016/j.actbio.2007.06.003 ↗
15. Structure: artificial armour10.1038/519S14a ↗
16. Bending characteristics analysis and lightweight design of a bionic beam inspired by bamboo structures10.1016/j.tws.2019.04.043 ↗
17. Biomimetic approach to gradient-helicoidal laminates for impact-resistant applications10.1007/s42114-024-01037-8 ↗
18. Biominerals-hierarchical nanocomposites: the example of bone10.1002/wnan.105 ↗
19. Puncture resistance of the scaled skin from striped bass: collective mechanisms and inspiration for new flexible armor designs10.1016/j.jmbbm.2013.04.011 ↗
20. Bioinspired adaptive, elastic, and conductive graphene structured thin-films achieving high-efficiency underwater detection and vibration perception10.1007/s40820-022-00799-4 ↗
21. Touch-responsive hydrogel for biomimetic flytrap-like soft actuator10.1007/s40820-022-00931-4 ↗
22. Spider web-inspired graphene skeleton-based high thermal conductivity phase change nanocomposites for battery thermal management10.1007/s40820-021-00702-7 ↗
23. Graphene and graphene derivatives toughening polymers: toward high toughness and strength10.1016/j.cej.2019.03.229 ↗
24. On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures10.1038/s41467-022-30873-9 ↗
25. Study on the strengthening and toughening design of the interlayer interface of GO-based bionic nacre composites and its optimization mechanisms10.1016/j.compscitech.2022.109423 ↗
26. Biomimetic layer-by-layer assembly of artificial nacre10.1038/ncomms1970 ↗
27. Bio-assembled nanocomposites in Conch shells exhibit giant electret hysteresis10.1002/adma.201202079 ↗
28. Conch-shell-inspired tough ceramic10.1002/adfm.202205309 ↗
29. Hierarchically enhanced impact resistance of bioinspired composites10.1002/adma.201700060 ↗
30. Dynamic self-strengthening of a bio-nanostructured armor - conch shell10.1016/j.msec.2019.109820 ↗
31. Nanotwin-governed toughening mechanism in hierarchically structured biological materials10.1038/ncomms10772 ↗
32. Lamellar architectures in stiff biomaterials may not always be templates for enhancing toughness in composites10.1038/s41467-019-14128-8 ↗
33. Anomalous inapplicability of nacre-like architectures as impact-resistant templates in a wide range of impact velocities10.1038/s41467-022-35439-3 ↗
34. Materials development and potential applications of transparent ceramics: a review10.1016/j.mser.2019.100518 ↗
35. 3D printing of photopolymers10.1039/C8PY00157J ↗
36. Emerging trends and prospects of electroconductive bioinks for cell-laden and functional 3D bioprinting10.1007/s42242-021-00169-w ↗
37. Layout design and application of 4D-printing bio-inspired structures with programmable actuators10.1007/s42242-021-00146-3 ↗
38. Thermal-based free vibration and buckling behavior of Bio-inspired cross- and double-helicoidal/bouligand laminated composite plates10.1007/s10338-023-00415-x ↗
39. Bio-inspired nacre and helicoidal composites: from structure to mechanical applications10.1016/j.tws.2023.111146 ↗
40. Free vibration behaviour of bio-inspired helicoidal laminated composite panels of revolution under thermal conditions: multi-output machine learning approach10.1016/j.enganabound.2024.106024 ↗
41. Free vibration analysis of bio-inspired helicoidal laminated composite square and annular plates having circular openings using isogeometric analysis10.1016/j.istruc.2024.107429 ↗
42. An insight into the buckling behavior of double- and cross-helicoidal laminated composite plates inspired by dactyl’s club10.1080/15376494.2023.2299941 ↗
43. Bird strike-induced damage studies on bio-inspired laminated plates with holes10.1016/j.ast.2025.110200 ↗
44. Free vibration behaviour of curved Miura-folded bio-inspired helicoidal laminated composite cylindrical shells using HSDT assisted by machine learning-based IGA10.1016/j.compstruct.2025.118933 ↗