In vitro hydroxyapatite forming ability and dissolution of tobermorite nanofibers
Source abstract
Abstract
In this paper, fiber-like and dispersible tobermorite (Ca(5)(Si(6)O(16))(OH)(2).4H(2)O), 80-120 nm in diameter and up to tens of micrometers in length was prepared by a hydrothermal microemulsion method. In vitro bioactivity of the nanofibers were evaluated by examing the hydroxyapatite (HAp) forming ability on the surface after soaking in simulated body fluid (SBF) for various periods. After soaking in SBF, the nanofibers were completely covered by bonelike hydroxycarbonate apatite (HCA) layers, and the nanofibers after soaking still kept stability in fibrous morphology. The dissolution of the nanofibers reached about 24.5% after soaking in SBF for 14 days. The results suggested that the tobermorite nanofibers exhibited certain desirable characteristics, including bioactivity, degradability and stability in morphology, and are a potential candidate for a reinforcement material in the development of novel bioactive and degradable composites for biomedical applications.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Facial Trauma and Fracture Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. One-dimensional nanostructures: synthesis, characterization, and applications10.1002/adma.200390087 ↗
2. Nanobelts, nanowires and nanodiskettes of semiconducting oxides – from materials to nanodevices10.1002/adma.200390100 ↗
3. Synthesis of p-type gallium nitride nanowires or electronic and photonic nanodevices10.1021/nl034003w ↗
4. Development of carbon nanofiber reinforced hydroxyapatite with enhanced mechanical properties10.1016/j.compositesa.2006.01.006 ↗
5. Fabrication in-situ SiC nanowires/SiC matrix composite by chemical vapour infiltration process10.1016/j.matlet.2004.05.059 ↗
6. The use of short carbon fibers reinforced thermo-plastic plates for fracture fixation10.1016/0142-9612(85)90074-2 ↗
7. Roy · 1965
8. Taylor · 1990
9. Bioceramics: from concept to clinic10.1111/j.1151-2916.1991.tb07132.x ↗
10. Preparation and sintering of CaSiO3 from coprecipitated powder using NaOH as precipitant and its apatite formation in simulated body fluid solution10.1557/JMR.1999.0076 ↗
11. Bioactivity of pseudowollastonite in human saliva10.1016/S0300-5712(98)00029-3 ↗
12. Synthesis and in vitro bioactivity of dicalcium silicate powders10.1016/S0955-2219(03)00320-0 ↗
13. Hench · 1993
14. Histo-chemical responses at a biomaterials interface10.1002/jbm.820080307 ↗
15. How useful is SBF in predicting in vivo bone bioactivity10.1016/j.biomaterials.2006.01.017 ↗
16. Preparation of SBF with different HCO3- content and its influence on the composition of biomimetic apatites10.1016/j.actbio.2005.11.001 ↗
17. Novel hydrothermal synthesis method for tobemorite fibers and investigation on their thermal stability10.1016/S0025-5408(02)00854-1 ↗
18. Effect of silica raw materials on the texture of synthesized xonotlite
19. Effect of raw lime materials on the textures of synthesized xonotlite
20. Crystal shape and size controls of xonotlite
21. Direct formation of xonotlite fibber with continuous-type autoclave
22. Hydrothermal synthesis of xonotlite whiskers by ion diffusion10.1023/A:1018575702546 ↗
23. Synthesis of nickel sulfide via hydrothermal microemulsion process: nanosheet to naoneedle10.1246/cl.2003.996 ↗
24. Cadmium sulfide nanocrystals via two-step hydrothermal process in microemulsions: synthesis and characterization10.1016/S0021-9797(03)00671-4 ↗
25. Dependence of apatite formation on silica-gel on its structure – effect of heat-treatment10.1111/j.1151-2916.1995.tb08887.x ↗
26. Preparation of particulate mono- and multilayers from surfactant-stabilized, nanosized magnetite crystallites10.1021/j100068a006 ↗
27. Effect of electric charges on the growth process of micelles10.1006/jcis.1993.1187 ↗
28. Synthesis of rod-like mesoporous silica using mixed surfactants of cetyltrimethylammonium bromide and cetyltrimethylammonium chloride as templates10.1016/S0167-577X(03)00355-0 ↗
29. In situ micelle–template-interface reaction route to CdS nnanotubes and nanowires10.1039/B206377H ↗
30. Hydroxyapatite nanostructure material derived using cationic surfactant as a template10.1039/b308801d ↗
31. Infrared studies of apatite. I: Vibrational assignments for calcium, strontium, and barium hydroxyapatites utilizing isotopic substitution10.1021/ic50131a039 ↗
32. Mechanical properties of highly porous PDLLA/Bioglass® composite foams as scaffolds for bone tissue engineering10.1016/j.actbio.2005.07.003 ↗
33. Fabrication and characterizationof bioactive wollastonite/PHBV composite scaffolds10.1016/j.biomaterials.2003.12.052 ↗
34. Fabrication, characterization, and in vitro degradation of composite scaffolds based on PHBV and bioactive glass10.1177/0885328205049472 ↗
35. Fabrication and characterization of polysulfone/dicalcium silicate composite films10.1177/0885328206054712 ↗
36. Preparation of macroporous biodegradable PLGA scaffolds for cell attachment with the use of mixed salts as porogen additives10.1002/jbm.10183 ↗
37. A novel porous scaffold made of polylactide-dextran blend by combining phase-separation and particle-leaching techniques10.1016/S0142-9612(02)00168-0 ↗
38. Technique to control pH in vicinity of biodegrading PLA–PGA implants10.1002/(SICI)1097-4636(199722)38:2<105::AID-JBM4>3.0.CO;2-U ↗
39. Effect of blending calcium compounds on hydrolytic degradation of poly (dl-lactic acid-co-glycolic acid)10.1016/S0142-9612(01)00382-9 ↗
40. Acidity near eroding polylactidepolyglycolide in vitro and in vivo in rabbit tibial bone chambers10.1016/S0142-9612(96)00075-0 ↗
41. In vitro and in vivo degradation of porous poly (dl-lactic-coglycolic acid) foams10.1016/S0142-9612(00)00047-8 ↗
42. pH-compensation effect of bioactive inorganic fillers on the degradation of PLGA10.1016/j.compscitech.2005.04.051 ↗
43. Tissue engineering10.1126/science.8493529 ↗
44. Biodegradable synthetic polymers for tissue engineering10.22203/eCM.v005a01 ↗
45. Production and potential of bioactive glass nanofibers as a next-generation biomaterial10.1002/adfm.200500750 ↗
46. Bioactive evaluation of 45S5 bioactive glass fibres and preliminary study of human osteoblast attachment10.1023/B:JMSM.0000032821.32577.fc ↗
47. Third-generation biomedical materials10.1126/science.1067404 ↗