Amorphous calcium phosphate offers improved crack resistance: A design feature from nature?
Source abstract
Abstract
Amorphous calcium phosphate (ACP) is found in biological organisms and coated implants, used in calcium phosphate cements, and has been recently confirmed as a precursor in mineralized tissue; however, nothing is known about crack initiation in ACP or its fracture toughness. The objective of this study was to determine the crack resistance of ACP to help understand its role in biological organisms and assist in the design of calcium-phosphate-based implants. ACP was manufactured by quenching droplets to form a bulk sample and individual splats. Testing of Berkovich and cube-corner indenter types revealed that the Berkovich indenter was more suitable, providing ease of crack detection. Nanoindentation was performed on polished ACP and hydroxyapatite (HAp), and cracks were identified with scanning electron microscopy. Additional nanoindentation was done on splats to assess the suitability for testing microarrays used in high throughput discovery of new bioceramics. ACP required about three times more force to initiate a crack compared to sintered HAp, but about nine times more than a single crystal. Crack initiation resistance decreased with increasing grain size. The fracture toughness of ACP was comparable to a single crystal, but higher for nanograined HAp. The crack initiation load can be potentially used for evaluating microsized samples. ACP prevents crack formation, but requires the presence of nanograins to provide a greater toughness. The implications of the higher crack initiation load in ACP are discussed for biological organisms and thermally processed biomaterials such as thermally sprayed and sintered HAp.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Transient amorphous calcium phosphate in forming enamel10.1016/j.jsb.2009.02.001 ↗
2. Amorphous calcium-phosphate in casein micelles of bovine-milk10.1007/BF02405131 ↗
3. Amorphous calcium-phosphate in the stylets produced by a marine worm (Nemertea)10.1007/BF01964805 ↗
4. Transformation of amorphous calcium-phosphate to crystalline dahllite in the radular teeth of chitons10.1126/science.227.4682.51 ↗
5. Amorphous calcium phosphates: synthesis, properties and uses in biomaterials10.1016/j.actbio.2010.02.017 ↗
6. Amorphous calcium (ortho)phosphates10.1016/j.actbio.2010.06.031 ↗
7. Amorphous calcium phosphate10.1159/000061652 ↗
8. Evaluation of commercial implants with nanoindentation defines future development needs for hydroxyapatite coatings10.1002/jbm.b.31537 ↗
9. The use of thermal printing to control the properties of calcium phosphate deposits10.1016/j.biomaterials.2010.05.012 ↗
10. Synthesis of amorphous calcium phosphate using various types of cyclodextrins10.1016/j.materresbull.2006.08.027 ↗
11. In-situ preparation of poly(propylene fumarate)–hydroxyapatite composite10.1016/j.biomaterials.2005.05.065 ↗
12. Influence of pyrophosphate on transformation of amorphous to crystalline calcium phosphate10.1007/BF02279193 ↗
13. Sol–gel synthesis of amorphous calcium phosphate and sintering into microporous hydroxyapatite bioceramics10.1111/j.1151-2916.1998.tb02499.x ↗
14. Synthesis and evaluation of amorphous calcium phosphate (ACP) by various synthesis methods10.4028/www.scientific.net/KEM.309-311.175 ↗
15. Mechanical activation and cement formation of beta-tricalcium phosphate10.1016/S0142-9612(03)00283-7 ↗
16. Amorphous phase formation in plasma-sprayed hydroxyapatite coatings10.1002/(SICI)1097-4636(19980305)39:3<407::AID-JBM9>3.0.CO;2-N ↗
17. Elliot · 1994
18. Temperature programmed dehydration of amorphous calcium phosphate10.1016/0021-9797(74)90280-X ↗
19. Thermal analysis of the amorphous phase in hydroxyapatite coatings10.1111/j.1151-2916.1998.tb02301.x ↗
20. Sintered hydroxyfluorapatites. II. Mechanical properties of solid solutions determined by microindentation10.1016/S0142-9612(03)00636-7 ↗
21. Nanoindentation reveals mechanical properties within thermally sprayed hydroxyapatite coatings10.1016/j.surfcoat.2008.12.025 ↗
22. Nanoindentation on the surface of thermally sprayed coatings10.1016/j.surfcoat.2009.05.033 ↗
23. Cracking during nanoindentation and its use in the measurement of fracture toughness10.1557/PROC-356-663 ↗
24. Sharp probes of varying acuity: instrumented indentation and fracture behavior10.1557/jmr.2004.19.1.165 ↗
25. Effect of angled indentation on mechanical properties10.1016/j.jeurceramsoc.2009.03.010 ↗
26. Elastic/plastic indentation damage in ceramics: the median/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
27. Measurement of fracture toughness in thin films and small volumes using nanoindentation methods
28. Riester L, Bridge RJ, Breder K. Fracture toughness of SiC determined using nanoindentation. Mat Res Soc Proc; 1998. p. 45–50.
29. Measurement of mechanical properties by ultra-low load indentation10.1016/S0921-5093(98)00724-2 ↗
30. Cook RF. Strength characterization of ceramics using controlled indentation flaws, PhD Thesis, University of New South Wales; 1986.
31. In-situ cube-corner indentation of soda-lime glass and fused silica10.1111/j.1551-2916.2004.01494.x ↗
32. High-resolution electron microscopy and convergent-beam electron diffraction of sintered undoped hydroxyapatite10.1111/j.1151-2916.1997.tb02788.x ↗
33. Improvement of the stability of hydroxyapatite through glass ceramic reinforcement10.1166/jnn.2010.2342 ↗
34. Micromechanical properties of single crystal hydroxyapatite by nanoindentation10.1016/j.actbio.2009.02.009 ↗
35. The crack-initiation threshold in ceramic materials subject to elastic/plastic indentation10.1007/BF00569288 ↗
36. Thermal expansion and microstructural analysis of experimental metal–ceramic titanium alloys10.1016/S0022-3913(03)00493-1 ↗
37. Gross KA, Mueller D, Lucas H, Haynes D. Design of topography on thermal spray hydroxyapatite coatings impacts the resorption pattern by osteoclasts, submitted for publication.
38. Fracture of glass in vacuum
39. Nanocrystalline hydroxyapatite with simultaneous enhancements in hardness and fracture toughness10.1016/j.biomaterials.2009.08.048 ↗
40. Microstructure and related mechanical properties of hot pressed hydroxyapatite ceramics10.1007/BF00124890 ↗
41. Preparation, microstructure and mechanical properties of dense polycrystalline hydroxyapatite10.1007/BF02396876 ↗
42. Characterization of hot pressed Al2O3–platelet reinforced hydroxyapatite coatings10.1007/BF00058724 ↗
43. Microstructure and mechanical properties of hydroxyapatite obtained by gel-casting process10.1016/j.ceramint.2006.10.021 ↗
44. Processing and mechanical properties of hydroxyapatite reinforced with hydroxyapatite whiskers10.1016/0142-9612(96)87652-6 ↗
45. Rapid densification of nanocrystalline hydroxyapatite for biomedical applications10.1016/j.ceramint.2006.05.009 ↗
46. Gross KA. Surface modification of prostheses. Masters Thesis, Monash University; 1991.
47. Young’s modulus and fracture toughness determination of high velocity oxy-fuel-sprayed bioceramic coatings10.1016/S0257-8972(02)00026-9 ↗
48. Plasma-sprayed hydroxyapatite (HA) coatings with flame-spheroidized feedstock: microstructure and mechanical properties10.1016/S0142-9612(99)00275-6 ↗
49. Characterization of microplasma-sprayed hydroxyapatite coating10.1007/s11666-009-9386-2 ↗
50. Nanoindentation method for measuring residual stress in brittle materials10.1111/j.1151-2916.2003.tb03380.x ↗
51. Variability of hydroxyapatite coated dental implants
52. Formation of the amorphous phase in hydroxyapatite coatings10.1002/(SICI)1097-4636(19980305)39:3<407::AID-JBM9>3.0.CO;2-N ↗
53. Lowenstam · 1989
54. Micromechanical properties and structural characterization of modern inarticulated brachiopod shells10.1029/2006JG000253 ↗
55. Phase transitions in amorphous calcium phosphates with different Ca/P ratios10.1016/j.tca.2007.11.022 ↗
56. High resolution measurement of dynamic (nano) indentation impact energy: a step towards the determination of indentation fracture resistance10.1080/14786435.2010.485585 ↗