journal article·2009-07

In vitro bioactivity and phase stability of plasma-sprayed nanostructured 3Y-TZP coatings

Guocheng Wang, Xuanyong Liu, Jianhua Gao, Chuanxian Ding

Acta Biomaterialia· Volume 5· Issue 6
Publisher page

Abstract

In this work, plasma-sprayed nanostructured zirconia coatings stabilized with 3mol.% yttria (3Y-TZP) were deposited on Ti substrates. The microstructure and phase composition of coatings were characterized using scanning electron microscopy and X-ray diffraction. The in vitro bioactivity of coatings was evaluated by examining the formation of bone-like apatite on its surface in simulated body fluid. MG63 cell lines were cultured on the coating to investigate its cytocompatibility. The crystalline phase of the as-sprayed coating was tetragonal zirconia, and no monoclinic zirconia was detected. The size of the grains on the as-sprayed coating surface was less than 100nm. The apatite could precipitate on the surface of the coating immersed in simulated body fluid for 28days while no apatite was formed on the surface of 3Y-TZP ceramic control, indicating that the bioactivity of the coating is superior to the ceramic with the same composition. It also revealed that the polished coating whose nanostructural outmost layer was removed was bioinert, implying the significance of the nanosized grains for its bioactivity. MG63 cells could adhere, grow and proliferate well on the coating surface, indicating that the coating had good cytocompatibility. Phase stability of plasma-sprayed 3Y-TZP coating was evaluated under hydrothermal conditions at 134 degrees C. It revealed that the plasma-sprayed nanostructured zirconia coating was more sensitive to aging than that of zirconia ceramics.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Zirconia as a sliding material10.1097/00003086-200010000-00013 ↗
2. Current status of zirconia used in total hip implants10.2106/00004623-200300004-00009 ↗
3. Review: zirconia as a ceramic biomaterial10.1016/S0142-9612(98)00010-6 ↗
4. Zirconia: the second hip generation of ceramics for total hip replacement
5. Microstructural and crystallographic surface changes after grinding zirconia-based dental ceramics10.1002/jbm.b.30382 ↗
6. Strength and reliability of surface treated Y-TZP dental ceramics10.1002/1097-4636(2000)53:4<304::AID-JBM4>3.0.CO;2-S ↗
7. Structure and bioactivity of micro-arc oxidized zirconia films10.1016/j.surfcoat.2006.07.058 ↗
8. Bioactivity and cytocompatibility of zirconia (ZrO2) films fabricated by cathodic arc deposition10.1016/j.biomaterials.2006.03.007 ↗
9. Apatite-forming ability of a zirconia/alumina nano-composite induced by chemical treatment10.1002/jbm.10071 ↗
10. Apatite formation on the zirconia metal treated with aqueous NaOH10.1016/S0142-9612(01)00110-7 ↗
11. Plasma treated nanostructured TiO2 surface supporting biomimetic growth of apatite10.1016/j.biomaterials.2005.04.035 ↗
12. Hydrothermal ageing of tetragonal zirconia ceramics
13. Role of H2O on the degradation process of Y-TZP10.1007/BF01756800 ↗
14. Phase change and mechanical properties of ZrO2–Y2O3 solid electrolyte after ageing10.1016/0167-2738(81)90138-7 ↗
15. Transformation of yttria-doped tetragonal ZrO2 polycrystals by annealing in water10.1111/j.1151-2916.1985.tb15239.x ↗
16. Low temperature aging of Y-TZP ceramics10.1111/j.1151-2916.1999.tb02055.x ↗
17. Strength recovery in degraded yttria-doped tetragonal zirconia polycrystals10.1111/j.1151-2916.1985.tb10188.x ↗
18. Mechanical properties of calcia stabilized zirconia following in vivo and in vitro aging10.1002/jbm.820090409 ↗
19. Calibration curve for quantitative analysis of the monoclinic-tetragonal ZrO2 system by X-ray diffraction10.1111/j.1151-2916.1984.tb19715.x ↗
20. Reaction kinetics in process of nucleation and growth
21. Nucleation and growth of the environment-induced monoclinic phase in yttria–TZP ceramics10.1023/A:1006664800349 ↗
22. Optimizing the plasma spray process parameters of yttria stabilized zirconia coatings using a uniform design of experiments10.1016/j.jmatprotec.2004.02.039 ↗
23. How useful is SBF in predicating in vivo bone bioactivity10.1016/j.biomaterials.2006.01.017 ↗
24. Sensitivities of human monocytes and epithelial cells to pneumolysin are different10.1128/IAI.70.2.1017-1022.2002 ↗
25. Microstructure of alumina–3wt.% titania coatings by plasma spraying with nanostructured powders10.1016/S0921-5093(03)00164-3 ↗
26. Plasma spraying of Al2O3 and Al2O3–Y2O310.1016/0040-6090(76)90643-X ↗
27. Microstructure of zirconia–yttria thermal barrier coatings10.1007/BF02403869 ↗
28. Microstructure of a plasma-sprayed Mo–Si–B alloy10.1361/105996300770350104 ↗
29. The relationship between the mechanism of formation, microstructure and properties of plasma-sprayed coatings10.1016/0040-6090(81)90633-7 ↗
30. A review of microstructure and properties of plasma sprayed ceramic coatings10.1016/0257-8972(89)90052-2 ↗
31. Development and implementation of plasma sprayed nanostructured ceramic coatings10.1016/S0257-8972(01)01470-0 ↗
32. On the formation of thermally sprayed alumina coatings10.1007/BF00550387 ↗
33. Phase composition and stability of nanosrtuctured 4.7wt.% yttria-stabilized zirconia coatings deposited by atmospheric plasma spraying10.1016/j.surfcoat.2005.03.034 ↗
34. Morphology of apatite formed on the surface of wollastonite coating soaked in simulated body fluid10.1016/S0167-577X(02)00848-0 ↗
35. Inert bioceramics (Al2O3, ZrO2) for medical application10.1016/S0020-1383(00)80021-2 ↗