journal article·2012-12

PDMSstar–PEG hydrogels prepared via solvent-induced phase separation (SIPS) and their potential utility as tissue engineering scaffolds

Brennan M. Bailey, Ruochong Fei, Dany Munoz-Pinto, Mariah S. Hahn, Melissa A. Grunlan

Acta Biomaterialia· Volume 8· Issue 12
Publisher page

Abstract

Inorganic-organic hydrogels based on methacrylated star polydimethylsiloxane (PDMS(star)-MA) and diacrylated poly(ethylene glycol) (PEG-DA) macromers were prepared via solvent-induced phase separation (SIPS). The macromers were combined in a dichloromethane precursor solution and sequentially photopolymerized, dried and hydrated. The chemical and physical properties of the hydrogels were further tailored by varying the number average molecular weight (M(n)) of PEG-DA (M(n)=3.4k and 6k gmol(-1)) as well as the weight percent ratio of PDMS(star)-MA (M(n)=7k gmol(-1)) to PEG-DA from 0:100 to 20:80. Compared to analogous hydrogels fabricated from aqueous precursor solutions, SIPS produced hydrogels with a macroporous morphology, a more even distribution of PDMS(star)-MA, increased modulus and enhanced degradation rates. The morphology, swelling ratio, mechanical properties, bioactivity, non-specific protein adhesion, controlled introduction of cell adhesion, and cytocompatibility of the hydrogels were characterized. As a result of their tunable properties, this library of hydrogels is useful to study material-guided cell behavior and ultimate tissue regeneration.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogels: synthesis, properties, applications · Bone Tissue Engineering Materials · 3D Printing in Biomedical Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. Cell-interactive 3D-scaffold; advances and applications10.1016/j.biotechadv.2009.02.002 ↗
2. The role of the extracellular matrix in morphogenesis10.1016/j.copbio.2003.08.002 ↗
3. Synthetic biomaterials as instructive extracellular microenvironments for morphogensis in tissue engineering10.1038/nbt1055 ↗
4. Rational design of hydrogels for tissue engineering: impact of physical factors on cell behavior10.1016/j.biomaterials.2006.09.017 ↗
5. Regulatory influence of scaffolds on cell behavior: how cells decode biomaterials10.2174/138920111794295684 ↗
6. Influence of hydrogel mechanical properties and mesh size on vocal fold fibroblast extracellular matrix production and phenotype10.1016/j.actbio.2008.04.013 ↗
7. Matrix elasticity directs stem cell lineage specification10.1016/j.cell.2006.06.044 ↗
8. Tissue cells feel and respond to the stiffness of their substrate10.1126/science.1116995 ↗
9. Cell–scaffold mechanical interplay within engineered tissues10.1016/j.semcdb.2009.02.001 ↗
10. Correlation of anisotropic cell behaviors with topographic aspect ratio10.1016/j.biomaterials.2008.11.041 ↗
11. Influence of channel width on alignment of smooth muscle cells by high-aspect-ratio microfabricated elastomeric cell culture scaffolds10.1002/jbm.a.30403 ↗
12. Modular tissue engineering: engineering biological tissues from the bottom up10.1039/b814285h ↗
13. Patterning hydrogels in three dimensions towards controlling cellular interactions10.1039/C0SM00852D ↗
14. Evaluation of smooth muscle cell response using two types of porous polylactide scaffolds with differing pore topography10.1089/107632704323061861 ↗
15. Microengineered hydrogels for tissue engineering10.1016/j.biomaterials.2007.07.021 ↗
16. Combinatorial approaches to controlling cellular interactions
17. Porosity and pore size regulate the degradation product profile of polylactide10.1021/bm1015464 ↗
18. In vitro evaluation of macroporous hydrogels to facilitate stem cell infliltration, growth, and mineralization10.1089/ten.tea.2008.0238 ↗
19. Effects of porosity and pore size on in vitro degradation of three-dimensional porous poly(d,l-lactide-co-glycolide) scaffolds for tissue engineering10.1002/jbm.a.30487 ↗
20. Effect of silica on the bioactivity of calcium phosphate composites in vitro
21. Bioactive and degradable hybridized nanofibers of gelatin–siloxane for bone regeneration10.1002/jbm.a.31330 ↗
22. Novel approach to fabricate porous gelatin–siloxane hybrids for bone tissue engineering10.1016/S0142-9612(02)00226-0 ↗
23. Small functional groups for controlled differentiation of hydrogel-encapsulated human mesenchymal stem cells10.1038/nmat2269 ↗
24. Proliferation and differentiation of goat bone marrow stromal cells in 3D scaffolds with tunable hydrophilicity10.1002/jbm.b.31400 ↗
25. Engineering the cell–material interface for controlling stem cell adhesion, migration, and differentiation10.1016/j.biomaterials.2011.02.004 ↗
26. Hydrophobicity as a design criterion for polymer scaffolds in bone tissue engineering10.1016/j.biomaterials.2004.11.011 ↗
27. Mechanical properties of hydrogels and their experimental determination10.1016/0142-9612(96)87644-7 ↗
28. Photoencapsulation of osteoblasts in injectable RGD-modified PEG hydrogels for bone tissue engineering10.1016/S0142-9612(02)00176-X ↗
29. The effect of incorporating RGD adhesive peptide in polyethylene glycol diacrylate hydrogel on osteogenesis of bone marrow stromal cells10.1016/j.biomaterials.2005.03.018 ↗
30. Engineering the bone–ligament interface using polyethylene glycol diacrylate incorporated with hydroxyapatite10.1089/ten.tea.2008.0105 ↗
31. Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly(ethylene glycol) hydrogels10.1002/jbm.1217 ↗
32. Designing 3D photopolymer hydrogels to regulate biomechanical cues and tissue growth for cartilage tissue engineering10.1007/s11095-008-9619-y ↗
33. Physiological pulsatile flow bioreactor conditioning of poly(ethylene glycol)-based tissue engineering grafts10.1007/s10439-006-9099-3 ↗
34. Three-dimensional growth and function of neural tissue in degradable polyethylene glycol hydrogels10.1016/j.biomaterials.2005.11.007 ↗
35. Protein adsorption to poly(ethylene oxide) surfaces10.1002/jbm.820251211 ↗
36. Three-dimensional biochemical and biomechanical patterning for guiding cell behavior10.1002/adma.200600647 ↗
37. Smooth muscle cell growth in photopolymerized hydrogels with cell adhesive and proteolytically degradable domains: synthetic ECM analogs for tissue engineering10.1016/S0142-9612(01)00051-5 ↗
38. Controllable properties and microstructure of hydrogels based on crosslinked poly(ethylene glycol) diacrylates with different molecular weights10.1002/app.33653 ↗
39. Uncoupled investigation of scaffold modulus and mesh size on smooth muscle cell behavior10.1002/jbm.a.32492 ↗
40. Hyperbranched fluoropolymer (HBFP) and linear poly(ethylene glycol) (PEG) based on amphiphilic crosslinked networks as efficient anti-fouling coatings: an insight into the surface compositions, topographies and morphologies10.1002/pola.20466 ↗
41. Evaluation of smooth muscle cell response using two types of porous polylactide scaffolds with differing pore topography10.1089/107632704323061861 ↗
42. Vascular tissue engineering: microtextured scaffold templates to control organization of vascular smooth muscle cells and extracellular matrix10.1016/j.actbio.2004.08.003 ↗
43. A macroporous hydrogel for the coculture of neural progenitor and endothelial cells to form functional vascular networks in vivo10.1073/pnas.0506020102 ↗
44. Chondrocyte signaling and artificial matrices for articular cartilage engineering10.1007/978-0-387-34133-0_5 ↗
45. Influence of physical properties of biomaterials on cellular behavior10.1007/s11095-011-0378-9 ↗
46. Macroporous hydrogel scaffolds and their characterization by optical coherence tomography10.1089/ten.tec.2010.0072 ↗
47. Generation of porous poly(ethylene glycol) hydrogels by salt leaching10.1089/ten.tec.2009.0646 ↗
48. Synthesis and characterization of macroporous poly(ethylene glycol)-based hydrogels for tissue engineering application10.1002/jbm.a.30780 ↗
49. Interconnected macroporous poly(ethylene glycol) cryogels as a cell scaffold for cartilage tissue engineering10.1089/ten.tea.2010.0045 ↗
50. Poly(ethylene glycol) cryogels as potential cell scaffolds: effect of polymerization conditions on cryogel microstructure and properties10.1039/B917142H ↗
51. Controlling porosity and microarchitecture of hydrogels for tissue engineering10.1089/ten.teb.2009.0639 ↗
52. Engineered smooth muscle tissues: regulating cell phenotype with the scaffold10.1006/excr.1999.4595 ↗
53. Osteoblast response to dimethacrylate composites varying in composition, conversion and roughness using a combinatorial approach10.1016/j.biomaterials.2009.05.019 ↗
54. Bioactive and degradable hybridized nanofibers of gelatin-siloxane for bone regeneration10.1002/jbm.a.31330 ↗
55. Swelling and degradation of hydrogels synthesized with degradable poly(b-amino ester) crosslinkers10.1039/c0py00074d ↗
56. Fundamental studies of a novel, biodegradable PEG-b-PLA hydrogel10.1016/S0032-3861(99)00629-1 ↗
57. Polymeric biomaterials with degradation sites for proteases involved in cell migration10.1021/ma981296k ↗
58. Enhancement of osteoblast gene expression by mechanically compatible porous Si-rich nanocomposite10.1002/jbm.b.30675 ↗
59. Effect of biomaterial properties on bone healing in a rabbit tooth extration socket model10.1002/jbm.a.20073 ↗
60. Photo-cross-linked PDMSstar–PEG hydrogels: synthesis, characterization, and potential application for tissue engineering scaffolds10.1021/bm9012293 ↗
61. Examination of the osteogenic potential of poly(ethylene glycol)-poly(dimethylsiloxane) hybrid hydrogels10.1089/ten.tea.2011.0348 ↗
62. Tuning PEG-DA hydrogel properties via solvent-induced phase separation (SIPS)10.1039/c1jm13943f ↗
63. Effect of mixed solvents on characteristics of poly(N-isopropylacrylamide) gels10.1021/la011410j ↗
64. Phase separation induced mechanical transition of poly(N-isopropylacrylamide)/water isochore gels10.1021/ma00096a031 ↗
65. Minimally adhesive polymer surfaces prepared from star oligosiloxanes and star oligofluorosiloxanes10.1002/pola.21362 ↗
66. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
67. Characterization of the in vitro macrophage response and in vivo host response to poly(ethylene glycol)-based hydrogels10.1002/jbm.a.32595 ↗
68. In vitro degradation of thin poly(DL-lactic-co-glycolic acid) films10.1002/(SICI)1097-4636(199908)46:2<236::AID-JBM13>3.0.CO;2-F ↗
69. Characterisation of UV-cured acrylate networks by means of hydrolysis followed by aqueous size-exclusion combined with reversed-phase chromatography10.1016/j.chroma.2006.10.071 ↗
70. Polymeric biomaterials10.1016/S1359-6454(99)00299-2 ↗
72. Osteoinductive biomaterials – properties and relevance in bone repair10.1002/term.5 ↗
73. Solutions able to reproduce in vivo surface-structure changes in bioactive glass-ceramic10.1002/jbm.820240607 ↗
74. Gelatin–chitosan composite capped gold nanoparticles: a matrix for the growth of hydroxyapatite10.1007/s11051-008-9385-0 ↗
75. Engineered smooth muscle tissues: regulating cell phenotype with the scaffold10.1006/excr.1999.4595 ↗
76. Preparation and characterization of crosslinked poly(ethylene glycol) diacrylate hydrogels as fouling-resistant membrane coatings10.1016/j.memsci.2008.12.054 ↗
77. The effect of incorporating RGD adhesive peptide in polyethylene glycol diacrylate hydrogel on osteogenesis of bone marrow stromal cells10.1016/j.biomaterials.2005.03.018 ↗
78. Photoencapsulation of osteoblasts in injectable RGD-modified PEG hydrogels for bone tissue engineering10.1016/S0142-9612(02)00176-X ↗
79. Uncoupled investigation of scaffold modulus and mesh size on smooth muscle cell behavior10.1002/jbm.a.32492 ↗
80. Changes of mitochondrial respiration, mitochondrial content and cell size after induction of apoptosis in leukemia cells10.1016/S0167-4889(03)00105-8 ↗