journal article·2016-10

Electrostatic flocking of chitosan fibres leads to highly porous, elastic and fully biodegradable anisotropic scaffolds

Elke Gossla, Robert Tonndorf, Anne Bernhardt, Martin Kirsten, Rolf-Dieter Hund, Dilibar Aibibu, Chokri Cherif, Michael Gelinsky

Acta Biomaterialia· Volume 44
Publisher page

Abstract

Unlabelled Electrostatic flocking - a common textile technology which has been applied in industry for decades - is based on the deposition of short polymer fibres in a parallel aligned fashion on flat or curved substrates, covered with a layer of a suitable adhesive. Due to their highly anisotropic properties the resulting velvet-like structures can be utilised as scaffolds for tissue engineering applications in which the space between the fibres can be defined as pores. In the present study we have developed a fully resorbable compression elastic flock scaffold from a single material system based on chitosan. The fibres and the resulting scaffolds were analysed concerning their structural and mechanical properties and the biocompatibility was tested in vitro. The tensile strength and Young's modulus of the chitosan fibres were analysed as a function of the applied sterilisation technique (ethanol, supercritical carbon dioxide, γ-irradiation and autoclaving). All sterilisation methods decreased the Young's modulus (from 14GPa to 6-12GPa). The tensile strength was decreased after all treatments - except after the autoclaving of chitosan fibres submerged in water. Compressive strength of the highly porous flock scaffolds was 18±6kPa with a elastic modulus in the range of 50-100kPa. The flocked scaffolds did not show any cytotoxic effect during indirect or direct culture of human mesenchymal stem cells or the sarcoma osteogenic cell line Saos-2. Furthermore cell adhesion and proliferation of both cell types could be observed. This is the first demonstration of a fully biodegradable scaffold manufactured by electrostatic flocking. Statement of significance Most tissues possess anisotropic fibrous structures. In contrast, most of the commonly used scaffolds have an isotropic morphology. By utilising the textile technology of electrostatic flocking, highly porous and clearly anisotropic scaffolds can be manufactured. Flocking leads to parallel aligned short fibres, glued on the surface of a substrate. Such structures are characterised by a high and adjustable porosity, accompanied by distinct stiffness in fibre direction. The present article describes for the first time a fully biodegradable flock scaffold, solely made of chitosan. Utilisation of only one material for manufacturing of flock substrate, adhesive and fibres allow a uniform degradation of the whole construct. Such a new type of scaffold can be of great interest for a variety of biomedical applications.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Tissue Engineering and Regenerative Medicine · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Role of pore size and morphology in musculoskeletal tissue regeneration10.1016/j.msec.2015.12.087 ↗
2. Scaffolds and cells for tissue regeneration: different scaffold pore sizes – different cell effects10.1007/s10616-015-9895-4 ↗
3. Development of novel scaffolds for tissue engineering by flock technology10.1177/0040517507081283 ↗
4. Novel textile scaffolds generated by flock technology for tissue engineering of bone and cartilage10.3390/ma5030540 ↗
5. Enhanced biochemical and biomechanical properties of scaffolds generated by flock technology for cartilage tissue engineering10.1089/ten.tea.2009.0817 ↗
6. Bilayered bioactive glass scaffolds incorporating fibrous morphology by flock technology10.1016/j.matlet.2015.06.036 ↗
7. Chitosan-based scaffolds for bone tissue engineering10.1039/c4tb00027g ↗
8. Chitosan-alginate biocomposite containing fucoidan for bone tissue engineering10.3390/md12010300 ↗
9. Ulvan and ulvan/chitosan polyelectrolyte nanofibrous membranes as a potential substrate material for the cultivation of osteoblasts10.1016/j.carbpol.2012.04.045 ↗
10. Chitosan: aspects of fiber spinnability10.1002/app.23201 ↗
11. Chitosan staple fibers and their chemical modification with some aldehydes10.1016/S0144-8617(98)00126-X ↗
12. Electrospinning of chitosan dissolved in concentrated acetic acid solution10.1016/j.biomaterials.2005.01.066 ↗
13. Well-aligned chitosan-based ultrafine fibers committed teno-lineage differentiation of human induced pluripotent stem cells for Achilles tendon regeneration10.1016/j.biomaterials.2015.02.051 ↗
14. Pure chitosan and chitsoan/chitosan lactate blended nanofibres made by single step electrospinning10.2478/v10304-012-0040-6 ↗
15. Novel textile chitosan scaffolds promote spreading, proliferation, and differentiation of osteoblasts10.1021/bm800693d ↗
16. Net shape nonwoven: a novel technique for porous three-dimensional nonwoven hybrid scaffolds10.1177/0040517513515315 ↗
17. Pure chitosan microfibres for biomedical applications10.2478/v10304-012-0041-5 ↗
18. Chitosan/gelatin micro/nanofiber 3D composite scaffolds for regenerative medicine10.1080/15685543.2014.852016 ↗
19. Improved sterilization of sensitive biomaterials with supercritical carbon dioxide at low temperature10.1371/journal.pone.0129205 ↗
20. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
21. Introducing a single-cell-derived human mesenchymal stem cell line expressing hTERT after lentiviral gene transfer10.1111/j.1582-4934.2008.00299.x ↗
22. D. Hermann, K. Remley, Textile adhesive from polyurethane containing carboxylate groups, patent US3640924 A, 1972.
23. Review: unraveling the less explored flocking technology for tissue engineering scaffolds10.1039/C5RA11937E ↗
24. Application of chitosan-based polysaccharide biomaterials in cartilage tissue engineering: a review10.1016/S0142-9612(00)00126-5 ↗
25. Chitosan and its derivatives for tissue engineering applications10.1016/j.biotechadv.2007.07.009 ↗
26. Chitosan: a versatile biopolymer for orthopaedic tissue-engineering10.1016/j.biomaterials.2005.03.016 ↗
27. In vitro evaluation of textile chitosan scaffolds for tissue engineering using human bone marrow stromal cells10.1021/bm900172m ↗
28. In vitro osteoclastogenesis on textile chitosan scaffolds10.22203/eCM.v019a10 ↗
29. Controlling cell adhesion and degradation of chitosan films by N-acetylation10.1016/j.biomaterials.2005.02.033 ↗
30. The enzymatic degradation and swelling properties of chitosan matrices with different degrees of N-acetylation10.1016/j.carres.2005.07.022 ↗
31. Biodegradation, biodistribution and toxicity of chitosan10.1016/j.addr.2009.09.004 ↗
32. Physicochemical modulation of chitosan-based hydrogels induces different biological responses: interest for tissue engineering10.1002/jbm.a.35035 ↗
33. The “instantaneous” compressive modulus of human articular cartilage in joints of the lower limb10.1093/rheumatology/38.2.124 ↗
34. Mechanical properties and the hierarchical structure of bone10.1016/S1350-4533(98)00007-1 ↗
35. Destruction of the chitosan matrix for tissue engineering during γ-irradiation sterilization10.1134/S0012500814020013 ↗
37. Effects of different sterilization methods on the morphology, mechanical properties, and cytotoxicity of chitosan membranes used as wound dressings10.1002/jbm.b.30081 ↗
38. Sterilization of chitosan: implications10.1177/088532829501000204 ↗
39. The effect of different sterilization procedures on chitosan dried powder10.1002/app.25906 ↗
40. Degradation of chitosan-based materials after different sterilization treatments
41. Effects of steam sterilization on thermogelling chitosan-based gels10.1002/1097-4636(2001)58:1<127::AID-JBM190>3.0.CO;2-G ↗
42. Chitins and chitosans for the repair of wounded skin, nerve, cartilage and bone10.1016/j.carbpol.2008.11.002 ↗
43. Influence of the degree of acetylation on some biological properties of chitosan films10.1016/S0142-9612(00)00183-6 ↗
44. Production and characterization of chitosan fibers and 3-D fiber mesh scaffolds for tissue engineering applications10.1002/mabi.200300100 ↗
45. Preparation, characterization and biological test of 3D-scaffolds based on chitosan, fibroin and hydroxyapatite for bone tissue engineering10.1016/j.msec.2013.04.026 ↗
46. Cartilaginous extracellular matrix-modified chitosan hydrogels for cartilage tissue engineering10.1021/am505723k ↗
47. Engineering cartilage or endochondral bone: a comparison of different naturally derived hydrogels10.1016/j.actbio.2014.11.031 ↗