journal article·2013-03

Reactive magnetic poly(divinylbenzene-co-glycidyl methacrylate) colloidal particles for specific antigen detection using microcontact printing technique

Mohamed M. Eissa, Md. Mahbubor Rahman, Nadia Zine, Nicole Jaffrezic, Abdelhamid Errachid, Hatem Fessi, Abdelhamid Elaissari

Acta Biomaterialia· Volume 9· Issue 3
Publisher page

Abstract

Epoxy-functionalized magnetic poly(divinylbenzene-co-glycidyl methacrylate) colloidal particles (mPDGs) were prepared by co-polymerization of 1,4-divinylbenzene and glycidyl methacrylate monomers. The reaction was conducted by batch emulsion polymerization in the presence of an oil in water magnetic emulsion as a seed. The chemical composition, morphology, iron oxide content, magnetic properties, particle size and colloidal stability of the prepared magnetic polymer particles were characterized using Fourier transform infrared spectroscopy, transmission electron microscopy, thermal gravimetric analysis, vibrating sample magnetometry, dynamic light scattering, and zeta potential determination, respectively. The prepared mPDGs were immobilized on a self-assembled monolayer of 3-aminopropyltriethoxysilane (APTES)/octadecyltrichlorosilane (OTS), which were patterned on glass using microcontact printing technique, forming mPDGs-APTES/OTS reactive surface. This construction (mPDGs-APTES/OTS) was used as a solid support for immunoassay. The immobilized magnetic particles were bioconjugated with monoclonal anti-human IL-10 antibody to provide specific and selective recognition sites for the recombinant human IL-10 protein (antigen). Fluorescence microscopic examination was carried out to follow this immunoassay using fluorescently labeled anti-human IL-10 antibody. The results obtained proved the successful use of mPDGs-APTES/OTS microcontact printed surfaces in an immunoassay, which can be exploited and integrated into microsystems in order to elaborate medical devices (e.g. biosensors) which could provide rapid analysis at high sensitivity with low volumes of analyte.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Biosensors and Analytical Detection · Nanofabrication and Lithography Techniques · Characterization and Applications of Magnetic Nanoparticles

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Morphology control of magnetic latex particles prepared from oil in water ferrofluid emulsion
2. Controllable preparation of epoxy-functionalized magnetic polymer latexes with different morphologies by modified miniemulsion polymerization10.1002/pola.23984 ↗
3. Organic–inorganic hybrid magnetic latex
4. Reactive and highly submicron magnetic latexes for bionanotechnology applications10.1002/masy.201050215 ↗
5. Multi-stimuli responsive magnetic core–shell particles: synthesis, characterization and specific RNA recognition10.1166/jcsb.2012.1006 ↗
6. Preparation of magnetic chitosan nanocomposite particles and their susceptibility for cellular separation applications10.1166/jcsb.2012.1007 ↗
7. Use of magnetic poly(glycidyl methacrylate) monosize beads for the purification of lysozyme in batch system10.1016/j.jchromb.2007.02.058 ↗
8. Immunomagnetic separation and detection of Salmonella cells using newly designed carriers10.1016/S0021-9673(03)00431-X ↗
9. A new option for sensitive diagnostics10.1016/j.jmmm.2005.02.046 ↗
10. Carboxyl-functionalized magnetic microparticle carrier for isolation and identification of DNA in dairy products10.1016/j.jmmm.2006.10.1157 ↗
11. Surface modified superparamagnetic nanoparticles for drug delivery: interaction studies with human fibroblasts in culture10.1023/B:JMSM.0000021126.32934.20 ↗
12. Detection of biological threat agents by immunomagnetic microsphere-based solid phase fluorogenic and electro-chemiluminescence10.1016/S0956-5663(99)00068-8 ↗
13. Magnetic separation of DNA10.1038/340733a0 ↗
14. Immunomagnetic separation reagents as markers in electron microscopy10.1016/S0022-1759(02)00007-8 ↗
15. Efficacy of sequential use of superparamagnetic iron oxide and gadolinium in liver MR imaging10.1080/028418502127347727 ↗
16. Magnetic nanoparticles for thermoablation
17. Temperature-sensitive polymer-coated magnetic nanoparticles as a potential drug delivery system for targeted therapy of thyroid cancer10.1166/jbn.2012.1465 ↗
18. Preparation and characterization of monodisperse core–shell Fe3O4@SiO2 microspheres and its application for magnetic separation of nucleic acids from E. coli BL2110.1166/jbn.2012.1454 ↗
19. Preparation and characterization of magnetically responsive bacterial polyester based nanospheres for cancer therapy10.1166/jbn.2012.1431 ↗
20. A one-step homogeneous immunoassay for cancer biomarker detection using gold nanoparticles probes coupled with dynamic light scattering10.1021/ja711298b ↗
21. Antibody-conjugated nanoparticles for biomedical applications10.1155/2009/439389 ↗
22. Magnetic nanoparticle–antibody conjugates for the separation of Escherichia coli O157:H7 in ground beef10.4315/0362-028X-68.9.1804 ↗
23. Highly specific HER2-mediated cellular uptake of antibody-modified nanoparticles in tumour cells10.1080/10611860400010697 ↗
24. Selective targeting of antibody-conjugated nanoparticles to leukemic cells and primary T-lymphocytes10.1016/j.biomaterials.2005.02.038 ↗
25. Poly(lactic acid) nanoparticles labeled with biologically active neutravidin TM for active targeting10.1016/j.ejpb.2004.04.006 ↗
26. Advances in preparation and biomedical applications of magnetic colloids
27. Synthesis and characteristics of poly(N-isopropylacrylamide-co-methacrylic acid)/Fe3O4 thermosensitive magnetic composite hollow latex particles10.1002/pola.26036 ↗
28. Preparation of magnetic latices
29. Magnetic poly(glycidyl methacrylate) micro spheres containing maghemite prepared by emulsion polymerization10.1016/j.jmmm.2006.03.069 ↗
30. Synthesis of amine-type adsorbents with emulsion graft polymerization of glycidyl methacrylate10.1016/j.nimb.2007.08.041 ↗
31. Separation of proteins on polymeric stationary phases grafted with various amine groups10.1016/S0021-9673(02)01840-X ↗
32. Preparation of poly(styrene-glycidylmethacrylate)/Fe3O4 composite microspheres with high magnetite contents10.1016/j.jmmm.2008.08.093 ↗
33. Magnetic poly(glycidyl methacrylate)-based microspheres prepared by suspension polymerization in the presence of modified La0.75Sr0.25MnO3 nanoparticles10.1016/j.eurpolymj.2008.12.030 ↗
34. Highly crosslinked poly(glycidyl methacrylate-co-divinyl benzene) particles by precipitation polymerization10.1016/j.polymer.2007.03.068 ↗
35. A glycidyl methacrylate-based resin with pendant urea groups as a high capacity mercury specific sorbent10.1016/S1381-5148(02)00189-X ↗
36. Uptake studies of copper(II) on glycidyl methacrylate chelating resin containing Fe2O3 particles10.1016/j.seppur.2005.08.008 ↗
37. Stability constants of polymer-bound iminodiacetate-type chelating agents with some transition-metal ions10.1002/app.11182 ↗
38. Preparation of micron sized epoxy-functionalized polystyrene particles and adsorption of biomolecules
39. Encapsulation of inorganic particles via miniemulsion polymerization. III. Characterization of encapsulation10.1002/1099-0518(20001215)38:24<4441::AID-POLA130>3.0.CO;2-U ↗
40. Encapsulation of inorganic particles via miniemulsion polymerization. II. Preparation and characterization of styrene miniemulsion droplets containing TiO2 particles10.1002/1099-0518(20001215)38:24<4431::AID-POLA120>3.0.CO;2-Y ↗
41. Preparation and characterization of magnetic polymeric composite particles by miniemulsion polymerization10.1002/pola.21525 ↗
42. Self-stabilized magnetic polymeric composite nanoparticles by emulsifier-free miniemulsion polymerization10.1021/la702281k ↗
43. Surface modification of iron oxide nanoparticles by a phosphate-based macromonomer and further encapsulation into submicrometer polystyrene particles by miniemulsion polymerization10.1002/pola.22383 ↗
44. Preparation of magnetic latexes functionalized with chloromethyl groups via emulsifier-free miniemulsion polymerization10.1016/j.jmmm.2006.11.170 ↗
45. Thermally-sensitive and magnetic poly(N-vinylcaprolactam)-based nanogels by inverse miniemulsion polymerization10.1166/jcsb.2012.1002 ↗
46. Magnetic polystyrene nanoparticles with a high magnetite content obtained by miniemulsion processes10.1002/macp.200290052 ↗
47. Highly magnetic latexes from submicrometer oil in water ferrofluid emulsions10.1002/pola.21391 ↗
48. Unconventional nanofabrication10.1146/annurev.matsci.34.052803.091100 ↗
49. Nanoscale protein patterning by imprint lithography10.1021/nl049758x ↗
50. Multiple ink nanolithography: toward a multiple-pen nano-plotter10.1126/science.286.5439.523 ↗
51. Microcontact printing of DNA molecules10.1021/ac035127w ↗
52. Microcontact printing: a tool to pattern10.1039/B613349E ↗
53. Features of gold having micrometer to centimeter dimensions can be formed through a combination of stamping with an elastomeric stamp and an alkanethiol “ink” followed by chemical etching10.1063/1.110628 ↗
54. Atomic force microscopy characterization of a microcontact printed, self-assembled thiol monolayer for use in biosensors10.1080/00032710600714014 ↗
55. Submerged micro-contact printing (smμCP): an unconventional printing technique of thiols using high aspect ratio elastomeric stamps10.1021/la0513095 ↗
56. Direct patterning of anti-human serum albumin antibodies on aldehyde-terminated silicon nitride surfaces for HSA protein detection10.1002/smll.200801735 ↗
57. Preparation and characterization of narrow sized (o/w) magnetic emulsion10.1016/S0304-8853(02)00412-2 ↗
58. Preparation and charecterization of imidazole-functionalized microspheres10.1002/app.25194 ↗