Monocomponent Non-isocyanate Polyurethane Adhesives Based on a Sol–Gel Process
Source abstract
Abstract
Non-isocyanate polyurethanes (NIPUs) based on five-membered cyclic carbonates have emerged as the most promising alternative to replace more toxic, conventional polyurethanes. However, the low reactivity of five-membered cyclic carbonates has limited the preparation of one pot systems because of long curing times. This work focuses on the improvement and application of these materials as adhesives through the combination of NIPU chemistry and a sol–gel process that allows for curing by atmospheric humidity. The synthesis of NIPU prepolymers functionalized with (3-aminopropyl)triethoxysilane (APTES) is demonstrated, and their curing behavior and adhesion performance are investigated by means of rheological experiments and a lap-shear test, respectively. In spite of the ability of the alkoxysilane to cure under ambient conditions, our results show that the use of catalyst and elevated temperatures speeds up the curing process and leads to improved adhesion properties. Hence, it is demonstrated that the fastest curing and the best performance are achieved at 100 °C when acetic acid is employed as the catalyst. Finally, we demonstrate the importance of the soft (poly(propylene glycol)dicarbonate) to hard (resorcinol dicarbonate) ratio to achieve superior cohesion and adhesion properties in NIPU adhesives.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Carbon dioxide utilization in catalysis · Polymer composites and self-healing · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
POLYMAT and Polymer Science and Technology Department, Faculty of Chemistry, University of the Basque Country UPV/EHU, Paseo Manuel de Lardizabal 3, 20018 Donostia-San Sebastián, Spain
Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, University of Liège, allée du 6 août, Building B6A, Agora Square, 4000 Liège, Belgium
ORIBAY Group Automotive S.L. R&D Department, Portuetxe bidea 18, 20018 Donostia-San Sebastián, Spain
Funding
Euskal Herriko Unibertsitatea
References (46)
Show source-provided references
1. 10.1002/anie.20130276610.1002/anie.201302766 ↗
2. Burchardt B. · 2010 · 3510.1533/9781845698058.1.35 ↗
3. MarketResearchAndFuture. Polyurethane Market Research Report—Forecast to 2022, 2017.
4. MarketsandMarkets. Polyurethane Adhesives Market by Technology (Solventborne, Reactive, Dispersion, and Hot Melt), Type (Thermoset & Thermoplastic), Application (Building & Const., Packaging, Automotive, Footwear, Electronics, and Furniture) - Global Forecast to 2021, 2016.
5. 10.1021/ja01161a00910.1021/ja01161a009 ↗
6. 10.1016/s0378-4274(96)03798-810.1016/s0378-4274(96)03798-8 ↗
7. 10.1289/ehp.955710.1289/ehp.9557 ↗
8. 10.4103/0970-9371.13063410.4103/0970-9371.130634 ↗
9. 10.1016/j.eurpolymj.2016.11.02710.1016/j.eurpolymj.2016.11.027 ↗
10. 10.1021/acs.macromol.5b0038410.1021/acs.macromol.5b00384 ↗
11. 10.1039/c7cy00438a10.1039/c7cy00438a ↗
12. 10.1021/acssuschemeng.9b0409810.1021/acssuschemeng.9b04098 ↗
13. 10.1039/c6py00264a10.1039/c6py00264a ↗
14. 10.1039/c9cs00047j10.1039/c9cs00047j ↗
15. 10.1002/anie.20170446710.1002/anie.201704467 ↗
16. 10.1021/acs.chemrev.5b0035510.1021/acs.chemrev.5b00355 ↗
17. 10.1021/acs.macromol.8b0073110.1021/acs.macromol.8b00731 ↗
18. 10.1039/c4gc01032a10.1039/c4gc01032a ↗
19. 10.1039/c8py00281a10.1039/c8py00281a ↗
20. 10.1021/acssuschemeng.8b0342910.1021/acssuschemeng.8b03429 ↗
21. 10.1039/c3gc00078h10.1039/c3gc00078h ↗
22. 10.1016/j.eurpolymj.2017.09.02810.1016/j.eurpolymj.2017.09.028 ↗
23. 10.1007/s10971-008-1786-010.1007/s10971-008-1786-0 ↗
24. 10.1016/s0032-3861(03)00530-510.1016/s0032-3861(03)00530-5 ↗
25. 10.1002/1521-3900(200209)187:1<325::aid-masy325>3.0.co;2-l10.1002/1521-3900(200209)187:1<325::aid-masy325>3.0.co;2-l ↗
26. 10.1016/j.polymer.2010.08.03510.1016/j.polymer.2010.08.035 ↗
27. 10.1016/j.porgcoat.2014.04.03210.1016/j.porgcoat.2014.04.032 ↗
28. Kathalewar M. · Int. J. Appl. Sci. Eng. Res. · 2012 · 3 · 1
29. 10.1039/c5ra24331a10.1039/c5ra24331a ↗
30. 10.1016/j.eurpolymj.2018.08.05410.1016/j.eurpolymj.2018.08.054 ↗
31. 10.1002/cssc.20150010310.1002/cssc.201500103 ↗
32. Licari J. J. · 2005 · 95
33. 10.1021/acs.chemrev.6b0048610.1021/acs.chemrev.6b00486 ↗
34. 10.1007/s10853-006-1138-910.1007/s10853-006-1138-9 ↗
35. Brinker C. J. · 1990
36. 10.1002/pol.1980.17018090710.1002/pol.1980.170180907 ↗
37. 10.1016/0022-3093(86)90108-010.1016/0022-3093(86)90108-0 ↗
38. 10.1021/j150338a00910.1021/j150338a009 ↗
39. 10.5562/cca247210.5562/cca2472 ↗
40. 10.1139/v78-38510.1139/v78-385 ↗
41. Haynes W. M. · 201610.1201/9781315380476 ↗
42. Coltrain B. K. · 1994 · 234 · 1910.1021/ba-1994-0234.ch019 ↗
43. 10.1016/j.eurpolymj.2015.09.03010.1016/j.eurpolymj.2015.09.030 ↗
44. 10.1002/pola.2672210.1002/pola.26722 ↗
45. 10.1039/c7py01209h10.1039/c7py01209h ↗
46. 10.1016/j.eurpolymj.2006.03.02410.1016/j.eurpolymj.2006.03.024 ↗