Source abstract
Abstract
NaMgH 3 has been considered to be a potential candidate for solid-state hydrogen storage due to its considerable hydrogen gravimetric (6.0 wt %) and volumetric (88.0 g/L) densities. Meanwhile, NaMgH 3 possesses an outstanding theoretical thermal storage density of 2881 kJ/kg, which makes it one of the most promising thermal energy storage materials. However, the sluggish dehydrogenation kinetics of NaMgH 3 embarrasses further practical application. Doping a nanosize Ti-based catalyst is treated to be one of the most effective methods to settle the poor dehydriding kinetics. In this work, different kinds of TiO 2 catalysts, the 5 wt % TiO 2 microparticle (MP) (100 nm), TiO 2 nanoparticle (NP) (5–10 nm), and TiO 2 nanotube (NT) (5–10 nm), were doped into NaMgH 3 in the process of ball milling and heat treatment, which in situ formed Na 0.46 TiO 2 significantly promoting the full hydrogen desorption kinetics of NaMgH 3 . Among all samples, the TiO 2 NT-doped sample shows the best performance of which the onset decomposition temperature is reduced to 300 °C, and the first- and second-step decomposition peak temperatures are decreased to 346.3 and 355.8 °C, respectively. The TiO 2 NT-doped sample desorbs approximately 3.4 wt % H 2 at 350 °C within 10 min, while the pure NaMgH 3 sample releases only 0.2 wt % H 2 in 10 min. The significant improvement in both two decomposition reactions kinetics of NaMgH 3 can be attributed to the tubular morphology of the TiO 2 NT and the in situ formation of multivalence Ti species (Na 0.46 TiO 2 ). These two reasons can change the kinetic models of NaMgH 3 from A2 to R2 and further dramatically decrease the activation energies of first- and second-step decomposition reactions of NaMgH 3 to 91.7 and 142.1 kJ/mol, respectively. In particular, the in situ formed Na 0.46 TiO 2 can benefit the e – transfers among Na +, Mg 2+, and H –, tremendously enhancing dehydrogenation properties.
Source: openalex_inverted_index · Quality: baseline
Affiliations
State Key Laboratory of Silicon Materials; School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China
College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310018, P.R. China
Guangdong Provincial Key Laboratory of Advance Energy Storage Materials, South China University of Technology, Guangzhou 510640, China
Key Laboratory of Advanced Materials and Applications for Batteries of Zhejiang Province, Hangzhou 310013, China
Funding
Ministry of Science and Technology of the People's Republic of China · National Natural Science Foundation of China · Guangdong Provincial Key Laboratory of Advance Energy Storage Materials