journal article·2022-09-29

Deconvoluting Photoelectrochemical Activity in Monoclinic–Scheelite BiVO4 Facet Selected Thin Films

Rashmi, Maurya D. Gyanprakash, Monika Gadhewal, Raj Ganesh S. Pala, Sri Sivakumar

The Journal of Physical Chemistry C· Volume 126· Issue 38
Publisher page

Abstract

Crystal facet engineering is one of the promising strategies to tune the band edge positions and surface electrochemistry of a material, which are essential to improve photoelectrochemical (PEC) water splitting. Materials with low-crystal symmetry structures demonstrate facet-dependent properties due to asymmetric coordination, and facet engineering can modulate PEC properties. In this regard, different facets [e.g., (002), (121), and (040)] of the monoclinic–scheelite polymorph of BiVO 4 (low-crystal symmetry structure) have been grown by controlling the thickness (deposition time) of thin films [22 nm (10 s) to 265 nm (50 s)] by the electron beam deposition technique. X-ray diffraction and high-resolution transmission electron microscopy analysis suggest the presence of different exposed planes that display different EC and PEC activity. PEC water splitting measurements suggest that the 110 nm/30 s thin-film sample, that is, the (040) facet, has the highest current density, that is, 0.29 mA/cm 2 (under light) and 0.068 mA/cm 2 (under dark) at 1.8 V versus RHE. However, the applied bias photon to current efficiencies (ABPEs) of both the thin films, that is, (040)/30 s and (121)/40 s facets, are nearly equal, whereas (121)/40 s has enhanced electrical and solar power-to-hydrogen (ESPH) conversion efficiencies compared to the (040)/30 s facet sample. Band edge positions computed via density functional simulations of exposed surfaces suggest that different facets have different band edge positions, thereby offering different driving forces to perform oxygen evolution reaction (OER). The relation between efficiency (ABPE and ESPH) and driving force suggests that the enhanced PEC performance of the (040) facet of BiVO 4 is due to the increased driving force to perform OER, whereas the improved efficiency of (121)/40 s can be due to enhanced surface catalytic activity. The highest catalytic activity of the (040)/30 s sample is due to low electron–hole recombination in the bulk and maximum charge injection at the surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · Copper-based nanomaterials and applications · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Science Programme, Indian Institute of Technology, Kanpur, Uttar Pradesh 208016, India

Department of Chemical Engineering, Indian Institute of Technology, Kanpur, Uttar Pradesh 208016, India

Centre for Advanced Studies, Lucknow, Uttar Pradesh 226031, India

Centre for Environmental Science and Engineering, Indian Institute of Technology, Kanpur, Uttar Pradesh 208016, India

Thematic Unit of Excellence on Soft Nanofabrication, Indian Institute of Technology, Kanpur, Uttar Pradesh 208016, India

Funding

Department of Science and Technology, Ministry of Science and TechnologyX

References (55)

Show source-provided references
1. 10.1002/adma.20190471710.1002/adma.201904717 ↗
2. 10.1021/jp200751j10.1021/jp200751j ↗
3. 10.1039/d0ra09655e10.1039/d0ra09655e ↗
4. 10.1002/adma.20180700110.1002/adma.201807001 ↗
5. 10.1039/c4ta04461d10.1039/c4ta04461d ↗
6. Pala R. G. S. · Energy · 2017 · 4 · 5
7. 10.1021/acs.jpcc.9b0845110.1021/acs.jpcc.9b08451 ↗
8. 10.1039/c8cs00542g10.1039/c8cs00542g ↗
9. 10.1103/physrevb.82.04510610.1103/physrevb.82.045106 ↗
10. 10.1039/c1cc10665a10.1039/c1cc10665a ↗
11. 10.1021/acsami.8b0519010.1021/acsami.8b05190 ↗
12. 10.1039/c5ee02300a10.1039/c5ee02300a ↗
13. 10.1021/ja809237310.1021/ja8092373 ↗
14. 10.1039/B907963G10.1039/B907963G ↗
15. 10.1039/c2jm16178h10.1039/c2jm16178h ↗
16. 10.1039/c9ta00020h10.1039/c9ta00020h ↗
17. 10.1021/acscatal.8b0164510.1021/acscatal.8b01645 ↗
18. 10.1039/d1nr05691c10.1039/d1nr05691c ↗
19. 10.1039/c7ta04441k10.1039/c7ta04441k ↗
20. 10.1021/jp406019r10.1021/jp406019r ↗
21. 10.1039/c8ee00125a10.1039/c8ee00125a ↗
22. 10.1021/acs.jpcc.8b0550310.1021/acs.jpcc.8b05503 ↗
23. 10.1039/b923435g10.1039/b923435g ↗
24. 10.1021/jp056367d10.1021/jp056367d ↗
25. 10.1002/chem.20100163610.1002/chem.201001636 ↗
26. 10.1038/ncomms240110.1038/ncomms2401 ↗
27. 10.1016/j.matlet.2017.02.00810.1016/j.matlet.2017.02.008 ↗
28. 10.1063/1.186949210.1063/1.1869492 ↗
29. 10.1002/chem.20120236510.1002/chem.201202365 ↗
30. 10.1039/c1ra00301a10.1039/c1ra00301a ↗
31. 10.1039/c4cp06089j10.1039/c4cp06089j ↗
32. 10.1021/ja206153v10.1021/ja206153v ↗
33. 10.1021/acsami.6b0812910.1021/acsami.6b08129 ↗
34. 10.1021/acs.jpcc.9b0582310.1021/acs.jpcc.9b05823 ↗
35. 10.1002/celc.20160035210.1002/celc.201600352 ↗
36. 10.1039/c5cp04212g10.1039/c5cp04212g ↗
37. 10.1016/0927-0256(96)00008-010.1016/0927-0256(96)00008-0 ↗
38. 10.1103/physrevb.50.1795310.1103/physrevb.50.17953 ↗
39. Kresse G. · Phys. Rev. B: Condens. Matter Mater. Phys. · 1999 · 59 · 175810.1103/PhysRevB.59.1758 ↗
40. 10.1103/physrevlett.77.386510.1103/physrevlett.77.3865 ↗
41. 10.1063/1.156406010.1063/1.1564060 ↗
42. 10.1063/1.176007410.1063/1.1760074 ↗
43. 10.1063/1.240466310.1063/1.2404663 ↗
44. 10.1103/physrevb.88.03530510.1103/physrevb.88.035305 ↗
45. 10.1039/c1cp22128k10.1039/c1cp22128k ↗
46. 10.1039/c9cp01975h10.1039/c9cp01975h ↗
47. 10.1021/acs.chemrev.8b0058410.1021/acs.chemrev.8b00584 ↗
48. 10.1039/c8ce01246f10.1039/c8ce01246f ↗
49. 10.1021/jp711318710.1021/jp7113187 ↗
50. 10.1063/1.32394810.1063/1.323948 ↗
51. Buriak, J. M.; Kamat, P. V.; Schanze, K. S. Best Practices for Reporting on Heterogeneous Photocatalysis; ACS Publications, 2014; Vol. 6, pp 11815–11816.10.1021/am504389z ↗
52. 10.1039/c6ta07177e10.1039/c6ta07177e ↗
53. 10.1021/acssuschemeng.6b0033510.1021/acssuschemeng.6b00335 ↗
54. 10.1039/c0ee00570c10.1039/c0ee00570c ↗
55. 10.1016/j.physb.2020.41271910.1016/j.physb.2020.412719 ↗