journal article·2023-01-12

Enhanced Capacity and Cyclability of Si@NiSi2 Nanocomposite Anodes Fabricated by Facile Electroless Ni Plating

Chia-Chun Wu, Sanjaya Brahma, Chuan-Pu Liu

Publisher page

Abstract

Although silicon (Si) has been proposed as the most promising anode material in lithium-ion batteries due to their high capacity (∼4000 mA h g –1 ), the poor cyclability resulting from the strain-induced pulverization caused by the severe volume change during charge/discharge hinders the industrial applications. Here, Si nanoparticles were conformally coated with either Ni, NiO, or NiSi 2 to suppress the tremendous volume change of Si, hence leading to prolonging the cycle life of the Si anode to a different degree. Both Si@Ni and Si@NiO nanocomposites were synthesized by one-step self-reducing (SR) electroless nickel plating without/with heat treatment, respectively, whereas Si@NiSi 2 nanocomposites were obtained by a two-step (SR + electroless nickel deposition, EN) process, followed by heat treatment. Among all these three nanocomposite anodes, Si@NiSi 2 prepared by 5 min of SR, 30 min of EN, and 400 °C annealing in sequence achieved the highest capacity of ∼1390 mA h g –1 and the best capacity retention of ∼86.6% with a Coulombic efficiency of 99% over 70 cycles. For comparison, the capacity retention of the Si@Ni and Si@NiO electrode over 70 cycles is estimated to be ∼67 and 75%, respectively. These results suggest that NiSi 2 could be a promising protective coating layer to effectively buffer the volume change of Si and promote the battery life.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, National Cheng Kung University, Tainan701, Taiwan

Funding

Ministry of Education · Ministry of Science and Technology, Taiwan

References (38)

Show source-provided references
1. 10.1039/d1ta02741g10.1039/d1ta02741g ↗
2. 10.1021/acsaem.8b0089710.1021/acsaem.8b00897 ↗
3. 10.1038/s41467-019-11925-z10.1038/s41467-019-11925-z ↗
4. 10.1021/acs.nanolett.0c0320310.1021/acs.nanolett.0c03203 ↗
5. 10.26599/nre.2022.912003110.26599/nre.2022.9120031 ↗
6. 10.26599/nre.2022.912003710.26599/nre.2022.9120037 ↗
7. 10.26599/nre.2022.912002610.26599/nre.2022.9120026 ↗
8. 10.1039/c8cs00441b10.1039/c8cs00441b ↗
9. 10.1038/nnano.2007.41110.1038/nnano.2007.411 ↗
10. 10.1063/1.292937310.1063/1.2929373 ↗
11. 10.1002/adfm.20050039210.1002/adfm.200500392 ↗
12. 10.1038/nnano.2012.3510.1038/nnano.2012.35 ↗
13. 10.1021/nl201470j10.1021/nl201470j ↗
14. 10.1039/b923002e10.1039/b923002e ↗
15. 10.1039/b925696b10.1039/b925696b ↗
16. 10.1021/nl301481410.1021/nl3014814 ↗
17. 10.1016/j.elecom.2005.08.02410.1016/j.elecom.2005.08.024 ↗
18. 10.1039/c2jm31286g10.1039/c2jm31286g ↗
19. 10.1039/c4cc01728e10.1039/c4cc01728e ↗
20. 10.1021/jz300689210.1021/jz3006892 ↗
21. 10.1021/nn503294z10.1021/nn503294z ↗
22. 10.1016/j.jpowsour.2018.02.01010.1016/j.jpowsour.2018.02.010 ↗
23. 10.1016/j.electacta.2016.11.09410.1016/j.electacta.2016.11.094 ↗
24. 10.1039/c6ee00023a10.1039/c6ee00023a ↗
25. 10.1039/c5nr04456a10.1039/c5nr04456a ↗
26. 10.1016/j.elecom.2005.03.01310.1016/j.elecom.2005.03.013 ↗
27. 10.1016/j.jpowsour.2005.05.02310.1016/j.jpowsour.2005.05.023 ↗
28. 10.1016/j.jpowsour.2011.11.04710.1016/j.jpowsour.2011.11.047 ↗
29. 10.1021/am300952b10.1021/am300952b ↗
30. 10.1016/j.electacta.2014.11.01610.1016/j.electacta.2014.11.016 ↗
31. 10.1016/j.jpowsour.2017.01.12810.1016/j.jpowsour.2017.01.128 ↗
32. 10.1016/j.elecom.2011.03.00610.1016/j.elecom.2011.03.006 ↗
33. 10.1016/j.nanoen.2015.03.00910.1016/j.nanoen.2015.03.009 ↗
34. 10.1088/0957-4484/19/16/16560610.1088/0957-4484/19/16/165606 ↗
35. 10.1021/am506486w10.1021/am506486w ↗
36. 10.1016/j.electacta.2016.01.19710.1016/j.electacta.2016.01.197 ↗
37. 10.1021/ja108085d10.1021/ja108085d ↗
38. 10.1016/j.actamat.2012.01.03310.1016/j.actamat.2012.01.033 ↗