Source abstract
Abstract
Fe-oxide/Al 2 O 3 samples (0.5-, 1.0-, 2.0-, and 4.0-Fe) containing various amounts of Fe-oxide on the porous Al 2 O 3 were prepared by tr-CVD and subsequent annealing. The catalytic activities toward CO oxidation under a dry air atmosphere were examined in the temperature range of 30–350 °C. The activities varied upon the deposition amounts of Fe-oxide below 200 °C. At 50 °C, the activity order was 0.5-Fe, 1.0-Fe, 2.0-Fe, and 4.0-Fe, whereas it shifted to 2.0-Fe, 1.0-Fe, 0.5-Fe, and 4.0-Fe at a higher temperature region (100–150 °C). CO-TPD and -TPR results indicated that Fe-oxide structures were different qualitatively as well as quantitatively with respect to the deposition amounts of Fe-oxides. The surface analysis results of X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry revealed the formation of the interfacial Fe–C–Al species. The population of Fe–C–Al of each Fe-oxide nanoparticle decreased as the deposition amounts of Fe-oxide increased (0.5-Fe, 2.0-Fe, and 4.0-Fe) correlating to the activity order at ∼50 °C. It suggested that the Fe–C–Al species can facilitate the lower temperature CO oxidation (at ∼50 °C) on the surface of Fe-oxide nanoparticles by activating oxygen atoms. However, the surface of Fe-oxide nanoparticles can effectively catalyze CO oxidation at a higher temperature (>100 °C) without the aid of the Fe–C–Al species.
Source: openalex_inverted_index · Quality: baseline
Affiliations
Department of Chemistry, Sungkyunkwan University Suwon, Suwon 16419, Republic of Korea
Center of Scientific Instrumentation, Korea Basic Science Institute, Chungbuk 28119, Republic of Korea
Beamline Division, Pohang Accelerator Laboratory, Pohang 37673, Republic of Korea
Center for Research Facilities, Chungbuk National University, Cheongju 28644, Republic of Korea
Department of Chemistry and Energy Engineering, Sangmyung University Seoul, Seoul 03016, Republic of Korea
Funding
National Research Foundation of Korea · Korea Basic Science Institute