Numerical Simulation of Crystallographic Corrosion: Particle Production and Surface Roughness
Source abstract
Abstract
We use a cellular automaton model to describe corrosion of a metal with crystalline defects. The line defects are distributed over the material mimicking screw or edge dislocations. The line-defect density and the corrosion probabilities of the metal surface site are the model parameters accounting for the crystallographic aspect of corrosion. The corrosion probability is higher for a site located on a line-defect than otherwise. Varying the model parameters, we investigate the roughness of the metal surface considering both its geometrical and chemical aspects. A complicated surface structure with a high geometrical roughness appears if the defect density is not too high. We show a strong correlation between what we call chemical roughness and the properties of the produced particles by the corrosion front. A mean field description is used to analyze the simulation results. For the long time, the simulation results show that the topography of the corrosion front changes from a defect-controlled regime to a situation where the stochastic aspect is the dominant factor.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanoporous metals and alloys · Corrosion Behavior and Inhibition · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratoire d'Electrochimie et de Chimie Analytique, Université Pierre et Marie Curie, ENSCP,CNRS UMR 7575, 4, place Jussieu, 75005 Paris, France, and Institute of Physical Chemistry, Polish Academy of Science, ul. Kasprzaka 44/52, 01-224 Warsaw, Poland
References (25)
Show source-provided references
1. The Corrosion and Oxidation of Metals: Scientific Principle andPractical Application; Evans, U. R., Ed.; Arnold: London, 1960.
2. Janik-Czachor M. · J. Electrochem. Soc. · 1981 · 128 · 51310.1149/1.2127344 ↗
3. Janik-Czachor M. · Br. Corros. J. · 1980 · 15 · 15410.1179/000705980798275409 ↗
4. Richardson J. A. · J. Electrochem. Soc. · 1973 · 120 · 19310.1149/1.2403419 ↗
5. Sedriks A. · J. Int. Met. Rev. · 1983 · 28 · 295
6. Lillard R. S. · Electrochem. Solid-State Lett. · 2003 · 6 · B3110.1149/1.1588113 ↗
7. Lillard R. S. · J. Electrochem. Soc. · 2006 · B35810.1149/1.2218108 ↗
8. Aida H. · J. Electrochem. Soc. · 1971 · 118 · 24310.1149/1.2407975 ↗
9. Marsh G. A. · J. Electrochem. Soc. 107 · 1960 · 12 · 96010.1149/1.2427579 ↗
10. Garreau M. · J. Appl. Electrochem. · 1977 · 7 · 19710.1007/BF00618986 ↗
11. Bech-Nielsen G. · Electrochim. Acta · 1997 · 42 · 184710.1016/S0013-4686(96)00397-0 ↗
12. Guo H. X. · Electrochim. Acta · 2006 · 51 · 534110.1016/j.electacta.2006.02.018 ↗
13. Reetz M. T. · J. Am. Chem. Soc. · 1994 · 116 · 740110.1021/ja00095a051 ↗
14. Tsuchiya H. · Small · 2005 · 7 · 72210.1002/smll.200400163 ↗
15. Murry B. J. · Nano Lett. · 2005 · 5 · 231910.1021/nl051834o ↗
16. Taleb A. · J. Phys. Chem. B · 2004 · 108 · 95210.1021/jp035377g ↗
17. Stafiej J. · 2006
18. Vautrin-Ul C. · Electrochim. Acta · 2007 · 52 · 536810.1016/j.electacta.2007.02.051 ↗
19. Nainville I. · Phys. Rev. E · 1996 · 53 · 253710.1103/PhysRevE.53.2537 ↗
20. Taleb A. · J. Electroanal. Chem. · 2001 · 500 · 55410.1016/S0022-0728(00)00433-2 ↗
21. Cordoba-Torres P. · Electrochim. Acta · 2001 · 46 · 297510.1016/S0013-4686(01)00524-2 ↗
22. Eden
23. Vautrin-Ul, C.; Chaussé, A.; Stafiej, J.; Badiali, J. P.Condens.MatterPhys.2004,7, 813, (2004).10.5488/CMP.7.4.813 ↗
24. Malki M. · Corros. Sci. · 2005 · 47 · 17110.1016/j.corsci.2004.05.004 ↗
25. Kortlöke O. · J. Physica A · 1998 · 31 · 9185