journal article·2008-12-11

Generation of a Highly Effective Corrosion Barrier on LiH Surfaces

Jonathan Phillips, Kennard V. Wilson, Dan Kelly, John Tanski

The Journal of Physical Chemistry C· Volume 112· Issue 49
Publisher page

Abstract

The kinetics of LiH powder/water reactions indicate a corrosion resistant layer can readily be generated on LiH by exposure to a mixture of CO 2 and H 2 O. Specifically, LiH powder corrodes very rapidly even in low ppm concentration of water, but samples pretreated in CO 2 /H 2 O mixtures exhibit a lengthy ‘delay’ before the onset of a very slow (relative to untreated material in the same corrosion conditions) corrosion reaction. The longer the pretreatment, the longer the delay prior to corrosion onset and the ‘slower’ the ultimate corrosion rate. X-ray photoelectron spectroscopy indicates that the CO 2 /H 2 O pretreatment creates a thin (ca. 1000 nm) carbonate layer. Surprisingly, a review of the kinetics of LiH corrosion for both treated and untreated material shows a very low activation energy for corrosion. This suggests that diffusion through a ‘barrier layer’ is rate controlling even on ‘pristine’ material. This implies earlier measures of true ‘neat’ reaction kinetics of hydride powders may not be entirely accurate. However, from a materials engineering perspective these findings suggest not a problem but a solution to the dominant mode (H 2 O) of LiH corrosion. The data also suggest a possible method of CO 2 sequestration with net energy release.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Los Alamos National Laboratory, Los Alamos New Mexico, 87545

References (23)

Show source-provided references
1. Wilson K. V. · J. Nucl. Mater. · 2008 · 374 · 22910.1016/j.jnucmat.2007.08.007 ↗
2. Phillips J. · Int. Mater. Rev. · 2005 · 50 · 26510.1179/174328005X41122 ↗
3. Leckey J. H. · Langmuir · 1996 · 12 · 636110.1021/la950843h ↗
4. Broughton D. A. · 2001
5. Rozenband V. I. · Int. Chem. Eng. · 1975 · 15 · 456
6. Broughton D. A. · 2001 · 26110.1007/978-1-4615-1215-8_29 ↗
7. Dinh L. N. · J. Nucl. Mater. · 2003 · 317 · 17510.1016/S0022-3115(03)00084-9 ↗
8. Dinh L. N. · J. Nucl. Mater. · 2005 · 347 · 3110.1016/j.jnucmat.2005.06.025 ↗
9. Kong V. C. Y. · Int. J. Hydrogen Energy · 1999 · 24 · 66510.1016/S0360-3199(98)00113-X ↗
10. Kong · Int. J. Hydrogen Energy · 2003 · 28 · 20510.1016/S0360-3199(02)00039-3 ↗
11. Machin W. D. · Trans. Faraday Soc. · 1966 · 62 · 220510.1039/tf9666202205 ↗
12. McLaughlin, J. F.; Cristy, S. S.Composition of corrosion films on lithium hydride surfaces after exposure to air,Y-1929, Oak Ridge Y-12 Plant,Oak Ridge, TN,1974; p26.10.2172/4341017 ↗
13. Phillips J. · Energy Fuels · 1995 · 9 · 56910.1021/ef00052a001 ↗
14. Phillips J. · 2001
15. Tartz M. · Plasma Process. Polym. · 2007 · 4 · 563310.1002/ppap.200731502 ↗
16. Meyer R. J. · 1932
17. Samos G. · Science · 1949 · 110 · 66310.1126/science.110.2868.663 ↗
18. Toon O. B. · Icarus · 1980 · 44 · 55210.1016/0019-1035(80)90130-X ↗
19. Henderson M. A. · Surf. Sci. · 1998 · 400 · 20310.1016/S0039-6028(97)00863-7 ↗
20. Ostrick B. · Sensors Actuators, B · 1999 · 57 · 11510.1016/S0925-4005(99)00062-3 ↗
21. Ostrick B. · Sensors Actuators, B · 2000 · 68 · 19710.1016/S0925-4005(00)00429-9 ↗
22. Spitzer R. H. · Metall. Soc. Am. Inst. Mining, Metall. Pet. Eng.−Trans. · 1966 · 236 · 1715
23. Fontana M. G. · 1978