journal article·2010-04-29

Experimental and Theoretical Exploration of the Anisotropy of Styrene Diffusion on Hydrogen Terminated Si(100)-2 × 1

S. Sinha, G. A. DiLabio, R. A. Wolkow

The Journal of Physical Chemistry C· Volume 114· Issue 16
Publisher page

Abstract

The anisotropy associated with the diffusion of styrene on the hydrogen-terminated silicon(100)-2 × 1 surface arises largely because of the surface reconstruction. This anisotropy was determined by using a novel scanning tunneling microscopy (STM) technique and by a combination of dispersion-corrected density functional theory (DFT) with Monte Carlo (MC) simulations. The STM tip was used to create a box of clean silicon surrounded by H−Si. Styrene molecules diffuse from the H−Si surface to the clean surface, where they stick with unit probability. The reduction of the box dimensions following the room-temperature diffusion of styrene are measured using STM and reflect the diffusion anisotropy without influence from the STM tip. DFT calculations were used to compute the dispersion binding of styrene on H−Si as well as the barrier heights associated with diffusion. These data were used to provide input for the MC diffusion simulations. Experiment and theory predict results that are in excellent agreement, viz., slight diffusion anisotropies of 1.1 ± 0.1 and 1.06 ± 0.04, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ion-surface interactions and analysis · Electron and X-Ray Spectroscopy Techniques · Advanced Electron Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemistry, University of Alberta, Edmonton, Alberta, Canada T6G 2G2, Department of Physics, University of Alberta, Edmonton, Alberta, Canada T6G 2G7, and National Institute for Nanotechnology, National Research Council of Canada, 11421 Saskatchewan Drive, Edmonton, Alberta, Canada T6G 2M9

References (40)

Show source-provided references
1. Müller E. W. · Z. Electrochem. · 1957 · 61 · 43
2. Mo Y. W. · Phys. Rev. Lett. · 1993 · 71 · 292310.1103/PhysRevLett.71.2923 ↗
3. Tsong T. T. · Mater. Sci. Eng., A · 2003 · 353 · 110.1016/S0921-5093(02)00658-5 ↗
4. Swartzentruber B. S. · Phys. Rev. Lett. · 1996 · 76 · 45910.1103/PhysRevLett.76.459 ↗
5. Otero R. · Nature Mater. · 2004 · 3 · 77910.1038/nmat1243 ↗
6. Dulot F. · Appl. Surf. Sci. · 2000 · 162 · 8610.1016/S0169-4332(00)00175-6 ↗
7. Heinonen J. · Phys. Rev. Lett. · 1999 · 82 · 273310.1103/PhysRevLett.82.2733 ↗
8. Somasi S. · Mater. Res. Soc., Symp. Proc. · 2001 · 672 · O1.8.1−O1.8.610.1557/PROC-671-O1.8 ↗
9. Cao P.-L. · J. Phys: Condens. Matter · 1996 · 8 · 1335
10. Bogicevic A. · Phys. Rev. B · 1998 · 57 · R945910.1103/PhysRevB.57.R9459 ↗
11. Lukkien J. J. · Phys. Rev. E · 1998 · 58 · 259810.1103/PhysRevE.58.2598 ↗
12. Wang X. · Surf. Sci. · 2004 · 561 · 2510.1016/j.susc.2004.05.004 ↗
13. Righi M. C. · Comput. Phys. Commun. · 2005 · 169 · 5010.1016/j.cpc.2005.03.013 ↗
14. Ehrlich G. · Annu. Rev. Phys. Chem. · 1980 · 31 · 60310.1146/annurev.pc.31.100180.003131 ↗
15. Wang Y. · J. Phys. Chem. B · 2005 · 109 · 519910.1021/jp0450080 ↗
16. Li Q. · J. Phys. Chem. B · 2005 · 109 · 142010.1021/jp0461605 ↗
17. Calzolari A. · Phys. Rev. B · 2006 · 73 · 12542010.1103/PhysRevB.73.125420 ↗
18. Johnson E. R. · J. Phys. Chem. C · 2009 · 113 · 568110.1021/jp8105056 ↗
19. DiLabio G. A. · J. Phys. Chem. C · 2009 · 113 · 996910.1021/jp902126b ↗
20. Shen T. C. · Science · 1995 · 268 · 159010.1126/science.268.5217.1590 ↗
21. Lopinski G. P. · Nature · 2000 · 406 · 4810.1038/35017519 ↗
22. Pitters J. L. · Nano Lett. · 2003 · 3 · 143110.1021/nl034258+ ↗
23. Hamprecht F. A. · J. Chem. Phys. · 1998 · 109 · 626410.1063/1.477267 ↗
24. Johnson E. R. · Chem. Phys. Lett. · 2004 · 394 · 33410.1016/j.cplett.2004.07.029 ↗
25. Johnson E. R. · J. Chem. Phys. · 2006 · 124 · 17410410.1063/1.2190220 ↗
26. Antony J. · Phys. Chem. Chem. Phys. · 2006 · 8 · 528710.1039/b612585a ↗
27. DiLabio G. A. · Chem. Phys. Lett. · 2008 · 455 · 34810.1016/j.cplett.2008.02.110 ↗
28. Mackie I. D. · J. Phys. Chem. A · 2008 · 112 · 1096810.1021/jp806162t ↗
29. Frisch M. J. · 2004
30. The slab was from a model of H-Si(100)-2 × 1 that was optimized by a periodic boundary DFT (PBE) calculation, as described in ref31.
31. Anagaw A. Y. · J. Phys. Chem. C · 2008 · 112 · 378010.1021/jp710065t ↗
32. The optimum structure of the styrene molecule when interacting with the surface has the vinyl group slightly out of the plane of the ring (calculated dihedral angle = 169°). Altering the dihedral angle and placing the molecule parallel to the surface decreased the binding energy by 0.01eV, or 4%.
33. The assumption of the pre-exponential being the same in all cases is utilized in the calculation of the final rate constant for along the row and across the row diffusion processes, using eq2. In the case of the along the row diffusion, the energy barriers are identical and soAI=A−I=AIIby necessity and the pre-exponentials directly cancel. In the case of the across the row diffusion, the barriers are nonidentical and so onlyA−I=AIIby necessity. However, it will be shown that the barriers are extremely similar, as such, assumingAI≈A−Iis acceptable.
34. Huang D. · Jpn. J. Appl. Phys. · 1996 · 35 · 373410.1143/JJAP.35.3734 ↗
35. Atkins P. W. · 2000
36. Schwartz M. P. · J. Am. Chem. Soc. · 2000 · 122 · 852910.1021/ja000928r ↗
37. Zhang Q. J. · J. Phys. Chem. C · 2009 · 113 · 526310.1021/jp809472p ↗
38. Fog, A.[http://www.gnu.org/licenses/gpl.html]The GNU General Public License; 2008.
39. Matsumoto M. · ACM Trans. Model. Comput. Simul. · 1998 · 8 · 310.1145/272991.272995 ↗
40. We note that the surface area covered by a physisorbed styrene molecule corresponds roughly to the area defined as one lattice site.