journal article·2019-05-09

Mitigating Carbon Formation with Al2TiO5-Enhanced Solid Oxide Fuel Cell Anodes

Martha M. Welander, Marley S. Zachariasen, Stephen W. Sofie, Robert A. Walker

The Journal of Physical Chemistry C· Volume 123· Issue 18
Publisher page

Abstract

Spectroscopic and electrochemical techniques were used to examine the benefits of adding small amounts of aluminum titanate (Al 2 TiO 5 or ALT) to standard NiO–yttria-stabilized zirconia (YSZ)-based solid oxide fuel cell anodes operating with methane at 800 °C. Combining small amounts (4% by mass) of ALT with NiO–YSZ leads to the formation of secondary phases that improve anode carbon tolerance via multiple reaction mechanisms. Raman data show that carbon forms on both ALT-doped and undoped anodes at open-circuit voltage and with applied bias as evidenced by the vibrational band of highly ordered graphite at 1560 cm –1 . However, ALT-doped anodes limited the amount of carbon that forms on both the surface and within the bulk, resulting in improved performance for up to 12 h of exposure to CH 4 . Results show that ALT-enhanced anodes accumulate ∼25% less carbon on the surface under open-circuit conditions and that increasing polarizations to 50% of the maximum current and beyond results in no observable carbon accumulation. These observations are used to deduce possible mechanisms that describe how secondary phases suppress carbon accumulation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Montana Materials Science University, Bozeman MT 59715, United States

Funding

U.S. Department of Energy

References (60)

Show source-provided references
1. 10.1016/j.apcata.2006.10.04010.1016/j.apcata.2006.10.040 ↗
2. 10.1016/j.jpowsour.2010.08.07310.1016/j.jpowsour.2010.08.073 ↗
3. 10.1016/j.jpowsour.2009.09.01410.1016/j.jpowsour.2009.09.014 ↗
4. 10.1021/jp511304x10.1021/jp511304x ↗
5. 10.1149/05701.1267ecst10.1149/05701.1267ecst ↗
6. 10.1021/cm902640j10.1021/cm902640j ↗
7. 10.1016/j.pecs.2013.10.00110.1016/j.pecs.2013.10.001 ↗
8. 10.1149/2.051302jes10.1149/2.051302jes ↗
9. 10.1016/s0920-5861(97)00014-x10.1016/s0920-5861(97)00014-x ↗
10. 10.1016/s0920-5861(02)00209-210.1016/s0920-5861(02)00209-2 ↗
11. 10.1039/c3cp53278j10.1039/c3cp53278j ↗
12. 10.1021/jp711312p10.1021/jp711312p ↗
13. 10.1021/acs.chemrev.6b0028410.1021/acs.chemrev.6b00284 ↗
14. 10.1016/j.jpowsour.2010.11.09510.1016/j.jpowsour.2010.11.095 ↗
15. 10.1149/1.139395810.1149/1.1393958 ↗
16. 10.1016/j.matchemphys.2016.02.04610.1016/j.matchemphys.2016.02.046 ↗
17. 10.1149/1.157733710.1149/1.1577337 ↗
18. 10.1111/j.1551-2916.2009.02980.x10.1111/j.1551-2916.2009.02980.x ↗
19. 10.1016/j.ijhydene.2014.01.09210.1016/j.ijhydene.2014.01.092 ↗
20. 10.1016/j.jpowsour.2005.09.06010.1016/j.jpowsour.2005.09.060 ↗
21. 10.1038/3500504010.1038/35005040 ↗
22. 10.1016/s0167-2738(99)00111-310.1016/s0167-2738(99)00111-3 ↗
23. 10.1002/1521-4095(200010)12:19<1465::aid-adma1465>3.0.co;2-910.1002/1521-4095(200010)12:19<1465::aid-adma1465>3.0.co;2-9 ↗
24. 10.1126/science.112587710.1126/science.1125877 ↗
25. 10.1039/c2ra01256a10.1039/c2ra01256a ↗
26. 10.1016/j.jpowsour.2014.02.00810.1016/j.jpowsour.2014.02.008 ↗
27. 10.1016/j.materresbull.2013.11.03410.1016/j.materresbull.2013.11.034 ↗
28. 10.1021/acs.jpcc.5b0134510.1021/acs.jpcc.5b01345 ↗
29. 10.1149/1.361022610.1149/1.3610226 ↗
30. Sofie, S. W.; Taylor, D. R. In Advances in Solid Oxide Fuel Cells III: Ceramic and Engineering Science Proceedings; Bansal, P. N., Salem, J., Zhu, D., Eds. Wiley-Blackwell, 2009; Vol. 28, pp 215–223.10.1002/9780470339534.ch21 ↗
31. 10.1016/j.jpowsour.2016.01.07010.1016/j.jpowsour.2016.01.070 ↗
32. 10.1016/j.apcata.2016.08.02010.1016/j.apcata.2016.08.020 ↗
33. 10.1149/2.0531803jes10.1149/2.0531803jes ↗
34. 10.1002/fuce.20170007310.1002/fuce.201700073 ↗
35. 10.1006/jcat.1998.205110.1006/jcat.1998.2051 ↗
36. 10.1016/s0926-3373(99)00133-210.1016/s0926-3373(99)00133-2 ↗
37. 10.1016/s0166-9834(00)80427-310.1016/s0166-9834(00)80427-3 ↗
38. Driscoll, D. R. Stabilization of Metallic Catalyst Microstructures against High Temperature Thermal Coarsening. Ph.D. Dissertation, Montana State University, Bozeman, MT, 2016.
39. 10.1016/0021-9517(91)90333-y10.1016/0021-9517(91)90333-y ↗
40. 10.1016/j.fuproc.2003.12.01310.1016/j.fuproc.2003.12.013 ↗
41. 10.1016/j.apcata.2008.06.00710.1016/j.apcata.2008.06.007 ↗
42. 10.1016/s0926-860x(00)00424-510.1016/s0926-860x(00)00424-5 ↗
43. 10.1016/j.elecom.2008.11.01410.1016/j.elecom.2008.11.014 ↗
44. 10.1016/j.jpowsour.2009.11.12610.1016/j.jpowsour.2009.11.126 ↗
45. 10.1016/j.jpowsour.2014.06.08710.1016/j.jpowsour.2014.06.087 ↗
46. 10.1016/j.jpowsour.2014.01.01410.1016/j.jpowsour.2014.01.014 ↗
47. 10.1007/s40843-015-0033-610.1007/s40843-015-0033-6 ↗
48. 10.1007/s10853-018-2205-810.1007/s10853-018-2205-8 ↗
49. 10.1103/physrevb.86.04541110.1103/physrevb.86.045411 ↗
50. 10.1021/jp910492b10.1021/jp910492b ↗
51. 10.1021/ac048600u10.1021/ac048600u ↗
52. 10.1146/annurev.anchem.111808.07364110.1146/annurev.anchem.111808.073641 ↗
53. 10.1016/0021-9517(94)90002-710.1016/0021-9517(94)90002-7 ↗
54. 10.1016/j.molcata.2004.09.01610.1016/j.molcata.2004.09.016 ↗
55. 10.1016/j.jeurceramsoc.2009.10.01210.1016/j.jeurceramsoc.2009.10.012 ↗
56. McIntyre, M. D. In Operando Studies of High Temperature Electrocatalysts Used for Energy Conversion. Ph.D. Dissertation, Montana State University, Bozeman, MT, 2016.
57. 10.1021/ac301504g10.1021/ac301504g ↗
58. 10.1016/j.jpowsour.2017.11.02410.1016/j.jpowsour.2017.11.024 ↗
59. 10.1149/1.155906410.1149/1.1559064 ↗
60. 10.1021/acs.jpcc.5b1186110.1021/acs.jpcc.5b11861 ↗