journal article·2025-09-12Open access

Influence of Fluorine Content and Carbon Black Loadings on Fluoroelastomers for CO2 Pipeline Transport

Anu Muthukamatchi, Ben Alcock, Reidar Lund

ACS Applied Polymer Materials· Volume 7· Issue 17

Abstract

High Resolution Image Download MS PowerPoint Slide Fluoroelastomers (FKMs) are widely used in oilfield seals due to their chemical resistance and thermal stability, yet their performance under liquid carbon dioxide (LCO 2 ) conditions remains insufficiently understood. This study investigates the performance of two FKMs, a copolymer (FKM1) and a terpolymer (FKM2), each formulated with carbon black (CB) loadings of 0, 25, and 37.5 wt %, under exposure to liquid CO 2 at 23 ± 2 °C and 58 ± 2 bar, which are representative of typical CO 2 pipeline transport conditions. The compounds were characterized through in-situ swelling measurements and, before and after exposure, using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), tensile testing, and compression set (CS). Morphological evaluation was conducted using scanning electron microscopy (SEM) on cryogenically fractured samples. The results show that FKM2, which contains higher fluorine content and estimated cross-linking density, exhibits lower swelling during and after decompression, improved dimensional recovery, and more stable mechanical performance following CO 2 exposure compared to FKM1. The addition of CB reduces CO 2 -induced rapid gas decompression (RGD) effects and increases tensile strength and stiffness, while reducing elastic recovery at higher filler loadings. Wide-angle X-ray scattering (WAXS) shows negligible changes in polymer structure following exposure to LCO 2 in both FKM types. Overall, this study highlights that factors such as cross-link density, fluorine content, and carbon black loading are important when selecting fluorinated elastomers for CO 2 transport applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicone and Siloxane Chemistry · Membrane Separation and Gas Transport · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemistry

University of Oslo

Department of Materials and Nanotechnology

SINTEF Industry

Funding

Norges Forskningsr?d

References (60)

Show source-provided references
1. UNFCCC. 2015: United Nations Framework Convention on Climate Change, The Paris Agreement. In 21st Conference of the Parties: Paris, 2015.
2. Masson-Delmotte, V.; Zhai, P. An IPCC Special Report on the Impacts of Global Warming of 1.5°C above Pre-industrial Levels and Related Global Greenhouse Gas Emission Pathways, in the Context of Strengthening the Global Response to the Threat of Climate Change; Sustainable Development, and Efforts to Eradicate Poverty, 2018, pp 616–621.10.1017/978100915794010.1017/9781009157940 ↗
3. 10.1002/macp.20190057310.1002/macp.201900573 ↗
4. 10.1016/j.egypro.2011.02.21410.1016/j.egypro.2011.02.214 ↗
5. Abas, A. Z.; Nor, A. M.; Suhor, M. F.; Mat, S. Non-Metallic Materials in Supercritical CO2 Systems; Malaysia. Offshore Technology Conference-Asia, 2014. 10.4043/24963-MS10.4043/24963-MS ↗
6. 10.1016/j.supflu.2017.09.00310.1016/j.supflu.2017.09.003 ↗
7. 10.1016/j.polymertesting.2020.10641110.1016/j.polymertesting.2020.106411 ↗
8. 10.1016/0032-3861(92)90054-Z10.1016/0032-3861(92)90054-Z ↗
9. 10.1016/j.prostr.2016.06.22010.1016/j.prostr.2016.06.220 ↗
10. 10.1016/j.cej.2025.16182610.1016/j.cej.2025.161826 ↗
11. 10.1016/S0022-1139(03)00102-710.1016/S0022-1139(03)00102-7 ↗
12. Hertz, D. L. Elastomers in CO2. In High Performance Elastomers & Polymers for Oil & Gas; Aberdeen: UK, 2012.
13. 10.1021/acs.iecr.2c0298110.1021/acs.iecr.2c02981 ↗
14. Klingender R. C. · 200810.1201/9781420017670 ↗
15. IEAGHG. Corrosion and Selection of Materials for Carbon Capture and Storage. 2010/3, 2010.
16. Menon, N. C.; Walker, M.; Anderson, M.; Colgan, N. Compatibility of Polymers in Super-critical Carbon Dioxide for Power Generation Systems: High Level Findings for Low Temperatures and Pressure Conditions. SAND-2019–14400R; 682612: United States, 2019, p 35.10.2172/1592964.10.2172/1592964 ↗
17. 10.1016/j.polymertesting.2025.10882010.1016/j.polymertesting.2025.108820 ↗
18. 10.1016/j.polymdegradstab.2020.10927810.1016/j.polymdegradstab.2020.109278 ↗
19. ISO 23936–2:2011. Petroleum, Petrochemical and Natural Gas Industries ─ Non-Metallic Materials in Contact with Media Related to Oil and Gas Production, Part 2: Elastomers, 2011.
20. 10.1016/j.polymer.2005.12.02010.1016/j.polymer.2005.12.020 ↗
21. 10.1021/acs.iecr.4c0445210.1021/acs.iecr.4c04452 ↗
22. 10.1051/mattech/202202910.1051/mattech/2022029 ↗
23. 10.1002/(SICI)1099-0488(19980430)36:6<977::AID-POLB5>3.0.CO;2-D10.1002/(SICI)1099-0488(19980430)36:6<977::AID-POLB5>3.0.CO;2-D ↗
24. 10.1002/app.5728910.1002/app.57289 ↗
25. 10.1002/app.1188110.1002/app.11881 ↗
26. 10.1088/1757-899X/553/1/01204910.1088/1757-899X/553/1/012049 ↗
27. 10.1016/j.eurpolymj.2009.06.02910.1016/j.eurpolymj.2009.06.029 ↗
28. 10.1007/s00397-020-01246-010.1007/s00397-020-01246-0 ↗
29. 10.1088/1757-899X/309/1/01202810.1088/1757-899X/309/1/012028 ↗
30. 10.1007/s12633-018-9836-x10.1007/s12633-018-9836-x ↗
31. 10.1016/j.ijhydene.2020.11.26410.1016/j.ijhydene.2020.11.264 ↗
32. 10.1016/j.ijhydene.2020.06.21810.1016/j.ijhydene.2020.06.218 ↗
33. 10.1016/j.engfailanal.2017.01.01210.1016/j.engfailanal.2017.01.012 ↗
34. Menon, N. C.; Kruizenga, A. M.; Alvine, K. J.; San Marchi, C.; Nissen, A.; Brooks, K. Behaviour of Polymers in High Pressure Environments as Applicable to the Hydrogen Infrastructure. In PVP2016; Vol. 6B: Materials and Fabrication, 2016.10.1115/PVP2016-6371310.1115/PVP2016-63713 ↗
35. 10.1002/masy.20160015710.1002/masy.201600157 ↗
36. 10.1016/j.polymdegradstab.2016.01.01210.1016/j.polymdegradstab.2016.01.012 ↗
37. Richter, B. Service Life of NBR- EPDM- HNBR and FKM O-Rings; O-Ring Prüflabor Richter GmbH: Stuttgart, Germany, 2014.
38. 10.1016/j.corsci.2016.02.02810.1016/j.corsci.2016.02.028 ↗
39. 10.1016/j.petrol.2017.01.01210.1016/j.petrol.2017.01.012 ↗
40. Erman B. · 2013
41. 10.1177/146442071880950210.1177/1464420718809502 ↗
42. 10.1007/s10973-016-5963-z10.1007/s10973-016-5963-z ↗
43. 10.1177/009524432199040210.1177/0095244321990402 ↗
44. 10.5254/1.353862710.5254/1.3538627 ↗
45. 10.1016/j.polymertesting.2019.10627310.1016/j.polymertesting.2019.106273 ↗
46. 10.1080/14658011.2016.117727110.1080/14658011.2016.1177271 ↗
47. 10.3390/polym1411223310.3390/polym14112233 ↗
48. 10.5254/1.353868310.5254/1.3538683 ↗
49. 10.1002/app.5563410.1002/app.55634 ↗
50. Daou, F.; De Miranda, C. R.; De Oliveira, J. L.; Engelke, B.; Borman, C.; Le Roy-Delage, S.; Lungwitz, B. Swelling of Elastomers in CO2 Environment: Testing Methodology and Experimental Data. In SPE Latin America and Caribbean Petroleum Engineering Conference; Society of Petroleum Engineers: Maracaibo, Venezuela, 2014, pp 16–21.10.2118/169277-MS10.2118/169277-MS ↗
51. 10.1016/j.polymertesting.2019.01.01510.1016/j.polymertesting.2019.01.015 ↗
52. 10.1016/j.polymertesting.2018.05.01610.1016/j.polymertesting.2018.05.016 ↗
53. 10.1016/j.polymer.2018.03.04210.1016/j.polymer.2018.03.042 ↗
54. 10.1007/s11051-022-05518-z10.1007/s11051-022-05518-z ↗
55. 10.1007/s10789-005-0263-110.1007/s10789-005-0263-1 ↗
56. 10.1088/1742-6596/1973/1/01210410.1088/1742-6596/1973/1/012104 ↗
57. 10.1038/s41598-022-14811-910.1038/s41598-022-14811-9 ↗
58. 10.1016/B978-081551517-3.50023-X10.1016/B978-081551517-3.50023-X ↗
59. 10.3390/polym1423528910.3390/polym14235289 ↗
60. 10.1002/app.2564410.1002/app.25644 ↗