journal article·2025-07Open access

Development and experimental performance investigation of a newly designed phosphoric acid fuel cell system

Gorkem Kubilay Karayel, Ibrahim Dincer

Abstract

This study examines the electrochemical and thermal performance of a newly developed phosphoric acid fuel cell (PAFC) system at the cell level, emphasizing electrode material coatings, and the impact of phosphoric acid concentration. Some critical performance parameters, such as temperature, reactant gas flow rates and wt% of the phosphoric acid, are considered and investigated through the experimental tests. Electrochemical assessments, comprising linear sweep voltammetry (LSV) and cyclic voltammetry (CV), are performed to analyze the influence of copper, iron, tin, and nickel coatings on the efficacy of the PAFC. Based on the experiments it shows that the highest recorded voltage values are 697.56 mV and 800.12 mV for non-coated plate and nickel-coated plate at 200°C with 3L/m hydrogen and 10L/m oxygen flow rates, 696.9 mV, 800.12 mV, 812.3 mV, 821.75 mV, and 837.27 mV for nickel-coated plate at 200°C with 2L/m, 3L/m, 4L/m, 5L/m, and 6L/m hydrogen flow rates at constant 10L/m oxygen flow rate, and finally 837.27 mV, 839.93 mV, 841 mV, 844.02 mV at 200°C with 10L/m, 12L/m, 14L/m, and 16L/m oxygen flow rate with constant 6L/m hydrogen flow rate. The energy and exergy efficiencies of the fuel cell are 33%, and 25%, respectively. The present study provides a solid theoretical understanding and a practical validation of the thermally stabilized, membraneless PAFC system optimized for low-cost and scalable energy conversion. • A new membraneless phosphoric acid fuel cell system is designed. • Energy and exergy approaches are used to carry out thermodynamic assessments. • Non-precious metals are tested for their electrochemical activities. • Operation parameters are investigated for optimization.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Hydrogen 1.0: a new age10.1016/j.ijhydene.2023.01.124 ↗
2. European Comission, Energy policies, website, visited 21.01, 2025, from https://commission.europa.eu/topics/energy_en.
3. United States of America, Department of energy, 2019 fuel cell technologies report, from https://publications.anl.gov/anlpubs/2021/08/166534.pdf.
4. 2024
5. Dynamic modelling and analysis of organic rankine cycle power units for the recovery of waste heat from 110kW proton exchange membrane fuel cell system10.1016/j.ijft.2023.100280 ↗
6. International Energy Agency, Global hydrogen review 2023, visited 21.01, 2025, from https://iea.blob.core.windows.net/assets/ecdfc3bb-d212-4a4c-9ff7-6ce5b1e19cef/GlobalHydrogenReview2023.pdf.
7. United States of America. Department of energy, hydrogen and fuel cell technologies office, accomplishments and progress, website, visited 20.01, 2025, from https://www.energy.gov/eere/fuelcells/hydrogen-and-fuel-cell-technologies-office-accomplishments-and-progress.
8. European Commission, Energy, Climate change, environment, EU hydrogen strategy, visited 21.01, 2025, from https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:52020DC0301.
9. Comparative evaluation of fuel cell based powering systems for cleaner locomotives
10. The theoretical model of thermal resistance for flat-plate CLPHP and its heat transfer performance in PEMFC cooling
11. Exergoeconomic analysis of a reversible solid oxide cell-based power-to-syngas-to-power system10.1504/IJEX.2023.131904 ↗
12. Investigation of phosphoric acid fuel cell, linear fresnel solar reflector and organic rankine cycle polygeneration energy system in different climatic conditions10.1016/j.psep.2021.01.035 ↗
13. Energetic, exergetic, economic, and exergoeconomic analysis of a phosphoric acid fuel cell-organic rankine cycle hybrid system10.1016/j.enconman.2023.116993 ↗
14. Current status of fuel cell based combined heat and power systems for residential sector10.1016/j.jpowsour.2015.05.050 ↗
15. Optimal design and dispatch of phosphoric acid fuel cell hybrid system with direct heat recovery through coupled calculation and artificial intelligence-based optimization10.1016/j.energy.2024.133444 ↗
16. Investigation of phosphoric acid fuel cell, linear fresnel solar reflector and organic rankine cycle polygeneration energy system in different climatic conditions10.1016/j.psep.2021.01.035 ↗
17. Fuel cells with an operational range of–20° C to 200° C enabled by phosphoric acid-doped intrinsically ultramicroporous membranes10.1038/s41560-021-00956-w ↗
18. Poly (arylene piperidine) s with phosphoric acid doping as high temperature polymer electrolyte membrane for durable, high-performance fuel cells10.1016/j.jpowsour.2019.227219 ↗
19. Analysis of a phosphoric acid fuel cell-based multi-energy hub system for heat, power, and hydrogen generation10.1016/j.applthermaleng.2021.116715 ↗
20. Energetic, exergetic and ecological evaluations of a hybrid system based on a phosphoric acid fuel cell and an organic rankine cycle10.1016/j.energy.2020.119365 ↗
21. Evaluation of thermal cycling on durability and PA loss in high temperature PEM fuel cells10.1016/j.jpowsour.2024.235411 ↗
22. Proton exchange membranes with functionalized sulfonimide and phosphonic acid groups for next-generation fuel cells operating at 120° C10.1016/j.cej.2024.150971 ↗
23. Experimental measurements of fuel and water crossover in an active DMFC10.1016/j.ijhydene.2020.11.027 ↗
24. Flow configurations of membraneless microfluidic fuel cells: a review10.3390/en14123381 ↗
25. Research progress of hydrogen energy and metal hydrogen storage materials
26. The effect of Pt/Pd ratio on the oxidation activity and resistance to sulfur poisoning for Pt-Pd/BEA diesel oxidation catalysts with high siliceous content10.1016/j.jece.2022.108217 ↗
27. Voltammetry at microcylinder electrodes: part I. Linear sweep voltammetry10.1016/0368-1874(85)87005-2 ↗
28. Cyclic voltammetry electrodeposition of self-standing Ni–Fe–Sn ternary alloys for accelerating alkaline hydrogen evolution10.1016/j.ijhydene.2023.03.221 ↗
29. National renewable energy laboratory (NREL), website, visited 20/01/2025, from https://www.nrel.gov/docs/gen/fy08/43061.pdf.
30. Operational experience of a 1 kW PAFC stack10.1016/S0306-2619(99)00112-9 ↗
31. Development of a 50 kW PAFC power generation system10.1016/S0378-7753(01)01052-7 ↗
32. A vapor feed methanol microfluidic fuel cell with high fuel and energy efficiency10.1016/j.apenergy.2015.03.028 ↗
33. Polymer separator and low fuel concentration to minimize crossover in microfluidic direct methanol fuel cells10.1002/er.3271 ↗
34. Comprehensive review on fuel cell technology for stationary applications as sustainable and efficient poly-generation energy systems10.3390/en14164963 ↗