journal article·2026-05Open access

Long-term stability and oxidation behavior of Mn2CuO4, Mn1.9Fe0.1CuO4, Mn1.7Fe0.3CuO4 coatings on SOFC interconnects: summary of a 10,000-h oxidation test

Justyna Ignaczak, Maciej Bik, Bartłomiej Lemieszek, Bartosz Kamecki, Grzegorz Cempura, Piotr Jasiński, Sebastian Molin

Abstract

This study presents the long-term stability and protective performance of spinel (Mn,Cu,Fe) 3 O 4 coatings deposited on ferritic stainless steel Crofer 22 APU. The spinel coating was submitted to a 10,000-h oxidation test at 750 °C. Three spinel oxides with varying iron content (x = 0; 0.1; 0.3) were synthesized via the sol-gel method and deposited by electrophoretic deposition (EPD). During the characterization an oxidation kinetics, coating microstructure, electrical properties, and chromium retention capability were monitored. The results show that the addition of iron significantly improves the phase stability, reduces oxidation rate constants, and limits the growth of chromium oxide layers. Among tested spinel oxides the Mn 1.7 CuFe 0.3 O 4 coating exhibited the best performance, maintaining a low area-specific resistance (ASR ∼3.8 mΩ cm 2 ) after 10,000 h and effectively suppressing chromium diffusion. Structural analyses using SEM, TEM, EDS, and Raman spectroscopy confirmed the formation of a dense and adherent protective layer with limited porosity and chromium content. Fuel cell aging tests confirmed the coating's protective capabilities, demonstrating minimal performance degradation and reduced Cr deposition on the cathode surface. Obtained results put more light on Mn-Cu-Fe spinels properties revealing their attractivity as an interesting cobalt-free, economically attractive and durable alternative for next generation SOCs interconnect protection. • 10,000 h oxidation test of cobalt-free (Mn,Cu,Fe) 3 O 4 coatings at 750 °C. • Fe addition improves phase stability and reduces oxidation rate constants. • Mn 1.7 CuFe 0.3 O 4 shows lowest ASR (∼3.8 mΩ cm 2 ) after 10,000 h. • Dense spinel layer effectively suppresses chromium diffusion. • Fuel cell tests confirm reduced Cr poisoning and stable performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Supercapacitor Materials and Fabrication · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. A critical review of key materials and issues in solid oxide cells
2. A comprehensive review of solid oxide fuel cells operating on various promising alternative fuels10.1016/j.enconman.2021.115175 ↗
3. Hybrid solid oxide fuel cells-gas turbine systems for combined heat and power: a review10.1016/j.apenergy.2015.06.027 ↗
4. A review on solid oxide fuel cell technology: an efficient energy conversion system10.1155/2024/6443247 ↗
5. Application of solid oxide fuel cell technology for power generation—A review10.1016/j.rser.2012.11.031 ↗
6. Materials for fuel-cell technologies10.1038/35104620 ↗
7. Investigations of metallic alloys for use as interconnects in solid oxide fuel cell stacks10.1007/BF00355908 ↗
8. Selection and evaluation of heat-resistant alloys for SOFC interconnect applications10.1149/1.1595659 ↗
9. Promising alloys for intermediate-temperature solid oxide fuel cell interconnect application10.1016/j.jpowsour.2006.02.028 ↗
10. Metallic interconnects for solid oxide fuel cells10.1016/j.msea.2005.02.047 ↗
11. Development of Cu1.3Mn1.7O4 spinel coating on ferritic stainless steel for solid oxide fuel cell interconnects10.1016/j.jpowsour.2014.10.017 ↗
12. Spinel coatings for UNS 430 stainless steel interconnects10.1016/j.surfcoat.2006.10.011 ↗
13. Conversion of copper and manganese metallic films to spinel coating10.1007/s10853-012-6404-4 ↗
14. Mn,Cu)3O4-based conductive coatings as effective barriers to high-temperature oxidation of metallic interconnects for solid oxide fuel cells10.1007/s10008-013-2245-6 ↗
15. Electrical conductivity and thermal expansion of spinels at elevated temperatures10.1111/j.1551-2916.2007.01522.x ↗
16. Preparation and characterisation of iron substituted Mn1.7Cu1.3-xFexO4 spinel oxides (x = 0, 0.1, 0.3, 0.5)10.1016/j.jeurceramsoc.2020.07.001 ↗
17. Nickel substituted CuMn 2 O 4 spinel coatings for solid oxide fuel cell interconnects10.1016/j.ijhydene.2016.08.075 ↗
18. Electrophoretically deposited protective Cu-Mn and Mn-Co spinel coatings for SOFC interconnects10.1149/11106.2233ecst ↗
19. Comparison of iron and copper doped manganese cobalt spinel oxides as protective coatings for solid oxide fuel cell interconnects10.1016/j.jpowsour.2017.10.060 ↗
20. CuMn1.7Fe0.3O4 – RE2O3 (RE = Y, Gd) bilayers as protective interconnect coatings for solid oxide cells10.1016/j.jeurceramsoc.2024.116743 ↗
21. Comparison of Cu1.3Mn1.7O4 spinels doped with Ni or Fe and synthesized via wet chemistry and solid-state reaction methods, designed as potential coating materials for metallic interconnects10.1016/j.jeurceramsoc.2023.05.015 ↗
22. Oxidation and electrical behavior of CuFe2O4 spinel coated Crofer 22 APU stainless steel for SOFC interconnect application10.1016/j.ssi.2016.02.015 ↗
23. Cu1.3Mn1.7O4/LaNi0.6Fe0.4O3 composite with prospects for IT-SOFC/SOEC applications10.1016/j.jeurceramsoc.2024.05.019 ↗
24. Long-term (4 year) degradation behavior of coated stainless steel 441 used for solid oxide fuel cell interconnect applications10.1016/j.jpowsour.2019.227480 ↗
25. Post-test characterization of metallic materials and adjacent components in an SOFC stack after 34,000 h operation at 700 °C10.1002/fuce.201800050 ↗
26. Metallic interconnects for solid oxide fuel cell: performance of reactive element oxide coating during 10, 20 and 30 months exposure10.1007/s11085-012-9308-4 ↗
27. On the possibility of improving the oxidation resistance of high-chromium ferritic stainless steel using reactive element oxide nanoparticles10.1007/s11661-024-07424-6 ↗
28. Fe-modified Mn2CuO4 spinel oxides: coatings based on abundant elements for solid oxide cell interconnects10.1016/j.ijhydene.2023.06.041 ↗
29. CuMnFe - Publikacja Która Powstaje, (n.d.).
30. Calculations of parabolic reaction rate constants10.1007/BF00667057 ↗
31. Effects of alloy heat treatment on oxidation kinetics and scale morphology for Crofer 22 APU10.1016/j.jpowsour.2013.03.181 ↗
32. Oxidation study of coated Crofer 22 APU steel in dry oxygen10.1016/j.jpowsour.2013.09.100 ↗
33. Effect of pre-oxidation on the oxidation resistance of Crofer 22 APU10.1016/j.corsci.2018.04.016 ↗
34. Effectiveness of a dual surface modification of metallic interconnects for application in energy conversion devices10.1016/j.ijhydene.2021.11.256 ↗
35. Comparison of iron and copper doped manganese cobalt spinel oxides as protective coatings for solid oxide fuel cell interconnects10.1016/j.jpowsour.2017.10.060 ↗
36. Formation mechanism and oxidation behavior of Cu–Mn spinel coating on ferritic stainless steel for solid oxide fuel cell interconnects10.1016/j.ijhydene.2023.01.070 ↗
37. Electrophoretic co-deposition of Fe2O3 and Mn1,5Co1,5O4: processing and oxidation performance of Fe-doped Mn-Co coatings for solid oxide cell interconnects10.1016/j.jeurceramsoc.2019.05.024 ↗
38. Cu1.3Mn1.7O4 spinel coatings deposited by electrophoretic deposition on Crofer 22 APU substrates for solid oxide fuel cell applications10.1016/j.surfcoat.2016.09.028 ↗
39. Synergism in the design of interconnect alloy-coating combinations solid for oxide fuel cells10.1016/j.scriptamat.2010.09.020 ↗
40. Interactions between SOFC interconnect coating materials and chromia10.1111/j.1551-2916.2011.04749.x ↗
41. Formation of spinel reaction layers in manganese cobaltite-coated Crofer22 APU for solid oxide fuel cell interconnects10.1016/j.jpowsour.2012.07.091 ↗
42. Experimental review of the performances of protective coatings for interconnects in solid oxide fuel cells10.1016/j.jpowsour.2023.232831 ↗
43. Comparison of Cu–Mn and Mn–Co spinel coatings for solid oxide fuel cell interconnects10.1016/j.ijhydene.2022.08.239 ↗
44. Iron doped manganese cobaltite spinel coatings produced by electrophoretic co-deposition on interconnects for solid oxide cells: microstructural and electrical characterization10.1016/j.jpowsour.2020.227910 ↗
45. Microstructure and electrical properties of Fe,Cu substituted (Co,Mn)3O4 thin films10.3390/cryst7070185 ↗
46. Chromium vaporization from high-temperature alloys, I. Chromia-forming steels and the influence of outer oxide layers10.1149/1.2434690 ↗
47. Polymer derived ceramics based on SiAlOC glasses as novel protective coatings for ferritic steel10.1016/j.apsusc.2021.151826 ↗
48. High-pressure study of Cr2O3 obtained by high-temperature oxidation by X-ray diffraction and Raman spectroscopy10.1016/S0022-3697(00)00215-8 ↗
49. Characterization of surface oxides by Raman spectroscopy
50. Lattice vibration spectra. LIX. Single crystal infrared and Raman studies of spinel type oxides10.1016/0022-4596(91)90171-D ↗
51. Copper-containing mixed metal oxides (Al, Fe, Mn) for application in three-way catalysis
52. Hosterman · 2011
53. Raman spectra of bixbyite, Mn 2 O 3 , up to 40 GPa10.1007/s00269-011-0441-4 ↗
54. Fabrication of pristine Mn2O3 and Ag-Mn2O3 composite thin films by AACVD for photoelectrochemical water splitting10.1039/C6DT02656G ↗
55. Electrical conductivity and defect structure of Cr2O3. II. Reduced temperatures (<∼1000°C)
56. Growth mechanisms and electrical conductivity of oxide scales on ferritic steels proposed as interconnect materials for SOFC's10.1002/fuce.200500110 ↗
57. Long-term (4 year) degradation behavior of coated stainless steel 441 used for solid oxide fuel cell interconnect applications10.1016/j.jpowsour.2019.227480 ↗
58. Metallic interconnects for solid oxide fuel cell: performance of reactive element oxide coating during 10, 20 and 30 months exposure10.1007/s11085-012-9308-4 ↗
59. Electrical conductivity and defect structure of Cr2O3. II. Reduced temperatures (<∼1000°C)10.1016/0167-2738(94)90402-2 ↗
60. Electronic transport in thermally grown Cr2O310.1007/BF00665668 ↗
61. Co- and Ce/Co-coated ferritic stainless steel as interconnect material for Intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2017.01.045 ↗
62. Growth mechanisms and electrical conductivity of oxide scales on ferritic steels proposed as interconnect materials for SOFC's10.1002/fuce.200500110 ↗
63. Development and evaluation of interconnect protective coatings based on commercial Mn1.9CuFe0.1O4 spinel powder10.1016/j.jeurceramsoc.2025.117259 ↗
64. Xiong
65. Mitigation of chromium poisoning of cathodes in solid oxide fuel cells employing CuMn1.8O4 spinel coating on metallic interconnect10.1016/j.jpowsour.2017.11.069 ↗
66. Cu-based coatings for IT-SOFC applications10.1149/09101.2291ecst ↗