Proton-conducting methacrylate–silica sol–gel membranes containing tungstophosphoric acid
Source abstract
Abstract
The increase of the operation temperature in proton-exchange membrane fuel cell (PEMFC) above 100 ◦C is a great concern for the application of this type of cells in electric vehicles. Hybrid organic–inorganic membranes with nano-sized interfaces can combine the main properties to meet this objective. Methacrylate–silica covalent hybrid membranes have been synthesised by polymerization of 2-hydroxyethyl methacrylate and 3-methacryloxypropyl trimethoxysilane, and hydrolysis–polycondensation of alkoxide radicals. Tungstophosphoric acid hydrate was incorporated to endow the membranes with proton conductivity. The composition and synthesis conditions to promote organic polymerisation and sol–gel condensation avoiding phase separation have been optimised. The structural analysis shows homogeneous membranes without phase separation. The water retention properties provided by SiO2 and tungstophosphoric acid leads to high proton conductivity (maximum values around 3×10−2 S cm−1) at 100–150 ◦C. A 0.5M % of Tungstophosphoric acid (PWA) is enough to build well-connected paths for proton conduction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Polyoxometalates: Synthesis and Applications · Covalent Organic Framework Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Wakizoe · Electrochim. Acta · 1995 · 40 · 33510.1016/0013-4686(94)00269-7 ↗
2. Kordesch · 1996
3. Kreuer · Solid State Ionics · 1997 · 97 · 110.1016/S0167-2738(97)00082-9 ↗
4. Ciureanu · J. Electrochem. Soc. · 1999 · 146 · 403110.1149/1.1392588 ↗
5. Miyake · J. Electrochem. Soc. · 2001 · 148 · A90510.1149/1.1383072 ↗
6. M. Aparicio, L. C. Klein, J. Electrochem. Soc. 152 (2005) A493.10.1149/1.1852443 ↗
7. Aparicio · J. Sol–Gel Sci. Technol. · 2003 · 26 · 105510.1023/A:1020794304517 ↗
8. Wei · J. Mater. Res. · 1993 · 8 · 114310.1557/JMR.1993.1143 ↗
9. Costa · J. Non-Cryst. Solids · 2002 · 304 · 8410.1016/S0022-3093(02)01008-6 ↗
10. Huang · Polymer · 1997 · 38 · 52110.1016/S0032-3861(96)00561-7 ↗
11. Wei · J. Sol–Gel Sci. Technol. · 1996 · 7 · 19110.1007/BF00401037 ↗
12. Malhotra · J. Electrochem. Soc. · 1997 · 144 · L2310.1149/1.1837420 ↗
13. Mioc · Solid State Ionics · 1991 · 46 · 10310.1016/0167-2738(91)90136-Y ↗
14. Rocchiccioli-Deltcheff · Inorg. Chem. · 1983 · 22 · 20710.1021/ic00144a006 ↗
15. Honma · Solid State Ionics · 2002 · 154–155 · 70710.1016/S0167-2738(02)00431-9 ↗
16. Nakajima · J. Electrochem. Soc. · 2002 · 149 · A95310.1149/1.1485080 ↗
17. Staiti · J. Power Sources · 1999 · 79 · 25010.1016/S0378-7753(99)00177-9 ↗
18. Honma · J. Membr. Sci. · 2001 · 185 · 8310.1016/S0376-7388(00)00636-0 ↗
19. M. Aparicio, Y. Castro, A. Durán, Solid State Ionics, 176 (2005) 333.10.1016/j.ssi.2004.07.021 ↗
20. Aricó · Electrochem. Solid-State Lett. · 1998 · 1 · 6610.1149/1.1390638 ↗
21. D.R. Lide (Editor-in Chief), Section 15: practical laboratory data CRC Handbook of Chemistry and Physics, CRC Press, 2003.
22. Abrantes · 2003
23. Ramos · Polym. Test. · 2003 · 22 · 29710.1016/S0142-9418(02)00102-2 ↗
24. Lavrencic Stangar · Solid State Ionics · 2001 · 145 · 10910.1016/S0167-2738(01)00920-1 ↗