Further studies of the anodic dissolution in sodium chloride electrolyte of aluminium alloys containing tin and gallium
Source abstract
Abstract
Abstract As part of a programme to develop a high power density, Al/air battery with a NaCl brine electrolyte, the high rate dissolution of an aluminium alloy containing tin and gallium was investigated in a small volume cell. The objective was to define the factors that limit aluminium dissolution in condition that mimic a high power density battery. In a cell with a large ratio of aluminium alloy to electrolyte, over a range of current densities the extent of dissolution was limited to ∼1000 C cm −2 of anode surface by a thick layer of loosely bound, crystalline deposit on the Al alloy anode formed by precipitation from solution. This leads to a large increase in impedance and acts as a barrier to transport of ions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (4)
Show source-provided references
1. Nestoridi · J. Power Sources · 2008 · 178 · 44510.1016/j.jpowsour.2007.11.108 ↗
2. P.R. Birkin, M. Nestoridi, D. Pletcher, Submitted for publication.
3. Tuck · J. Electrochem. Soc. · 1987 · 134 · 297010.1149/1.2100325 ↗
4. Tuck · Faraday Discuss. · 1992 · 94 · 17110.1039/fd9929400171 ↗