journal article·2006-09

Formation of a thin-layer electrolyte for SOFC by magnetic pulse compaction of tapes cast of nanopowders

V.V. Ivanov, A.S. Lipilin, Yu.A. Kotov, V.R. Khrustov, S.N. Shkerin, S.N. Paranin, A.V. Spirin, A.S. Kaygorodov

Journal of Power Sources· Volume 159· Issue 1
Publisher page

Abstract

Abstract From the analysis of the scientific and technical literature it is possible to determine the trend of development of technologies for preparation of thin films of solid electrolytes for SOFC as the most promising one. The use of powder compaction technologies and weakly agglomerated nanosized powders for this purpose has some advantages. The present study deals with physicochemical properties of electrolytes based on zirconia and ceria and electrochemical cells loaded with these electrolytes. Weakly agglomerated nanopowders with particles about 15 nm in size were produced by laser sputtering. Films 15–25 μm thick were obtained from nanopowders of the electrolytes by butyral resin slip casting. Uniaxial and radial magnetic pulse compaction of the cast films was performed at 0.1–1.6 GPa. The apparent density of the compacts accounted for 0.5–0.7 of the theoretical value. Sintering at temperatures of 900–1250 °C provided electrolytes having the relative density of 0.92–0.98. The analysis of the structure and the conductivity of the solid electrolytes, which was performed using samples shaped as flat thin disks 15–30 mm in diameter and 10 μm to 2 mm thick, and the examination of the electrochemical characteristics of the cells made of an ultrafine solid electrolyte in the form of tubes having the diameter of about 10 mm and walls 80–250 μm thick confirmed that the ceramic samples were gas-tight and had not laminations. The conductivity of, e.g. the YSZ electrolyte was 0.08–0.112 S cm−1. The electrochemical cells, which were tested in the regime of a fuel cell with a solid electrolyte synthesized using the proposed technologies, provided the specific power of about 1 W cm−2 at 800–850 °C even without optimization of the electrodes. Thus, the ultrafine solid electrolytes met the requirements imposed on SOFC ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Metal Extraction and Bioleaching · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Nanoparticle materials densification10.1016/S0965-9773(96)00046-3 ↗
2. Nanocrystalline alumina by high pressure sintering10.4028/www.scientific.net/MSF.225-227.617 ↗
3. V. Ivanov, S. Paranin, V. Khrustov, Yu. Kotov, S. Ivin, A. Nikonov, A. Medvedev, A. Shtol’ts, Application of magnetic pulsed compaction for sintering of nanostructured oxide ceramics, Part B, in: Proceedings of 10th International Ceramic Congress, Florence, Italy, 14–18 July 2002.
4. Properties of YSZ and CeGdO nanopowders prepared by target evaporation with a pulse-repetitive CO2 laser
5. B.A. Rotenberg, Ceramic Capacitor Dielectrics, RFBR, 2000.
6. Mistler · 2000
7. V.V. Ivanov, V.R. Khrustov, S.N. Paranin, A.I. Medvedev, A.K. Shtol’ts, O.F. Ivanova, A.A. Nozdrin, Stable zirconia nanoceramics prepared using magnetic pulsed compaction of nano-sized powders, Book of Abstracts, ECERS Topical Meeting Nanoparticles, Nanostructures & Nanocomposites, 5–7 July 2004, S. Petersburg, Russia, pp. 91–92.
8. V.V. Ivanov, V.R. Khrustov, A.S. Lipilin, S.N. Shkerin, Conductivity of zirconia and ceria electrolytes with sub-micrometer scaled grains, Book of Abstracts, SSI-15, 17–22 July 2005, Baden-Baden, Germany, p. 416.
9. Ioffe · Phys. Stat. Sol. (a) · 1975 · 30 · 8710.1002/pssa.2210300109 ↗
10. S. Baron, Intermediate Temperature (500–850°C) Solid Oxide Fuel Cells (IT-SOFCs) explained, Imperial College http://www.fuelcelltoday.com/FuelCellToday/FCTFiles/FCTArticleFiles/Article_745_IT-SOFC0104.pdf, 21 January 2004.