journal article·2024-09

The study on the reason why ZnS catalyst cannot suppress the shuttle effect of polysulfides in lithium-sulfur (Li–S) battery

Youshuang Zhou, JianYun Ding, Zhaoyang Wei, Weiwei Lei, Jun You, Qunchao Zhang, Dean Shi

Publisher page

Abstract

The catalytic effect of zinc sulfide (ZnS) on the transformation of polysulfides (Li 2S 8) to lithium sulfide (Li 2S) has been proven by the enhancement in the rate performance of lithium-sulfur (Li–S) batteries incorporating ZnS particles into the cathode. Accordingly, the shuttling effect of polysulfide should also be suppressed. However, the expected phenomenon is not found in the Li–S batteries with ZnS particles being added in the cathodes. In order to find the intrinsic mechanism of this phenomenon, detailed catalytic effects of ZnS particles on different polysulfide molecules are investigated. It is shown that ZnS can only enhance the reaction from Li 2S 4 to Li 2S and it has almost no catalytic effect on the reaction from Li 2S 6 to Li 2S 4. This is why the shuttle effect of Li 2S 6 cannot be effectively prohibited. This mechanism is further verified via combining ZnS particles with S–C@PVA yolk-shell particles containing sulfur (S) and carbon black (C) as the core and PVA as the shell. Although the reaction from Li 2S 6 to Li 2S 4 cannot be directly catalysed by ZnS particles, it can still be enhanced when ZnS particles are distributed within the S–C@PVA yolk-shell structure (S–C–ZnS@PVA) because the reaction speed from the Li 2S 4 to Li 2S is accelerated. The fast consumption of Li 2S 4 will result in the enhancement of the reaction from Li 2S 6 to Li 2S 4, which will largely reduce the diffusion of Li 2S 6 out of the PVA shell. While if ZnS particles are located outside the S–C@PVA yolk-shell structure (S–C@PVA-ZnS), large amount of Li 2S 6 can still diffuse out of the PVA shell and enter into the electrolyte since the transformation from is Li 2S 6 to Li 2S 4 relatively low. Both the rate performance and cycle stability of the batteries with S–C–ZnS@PVA cathodes are higher than those with S–C@PVA-ZnS ones. These results will give a guidance for the preparation of Li–S battery with high performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Rechargeable Na/Cl-2 and Li/Cl-2 batteries10.1038/s41586-021-03757-z ↗
2. Lithiated metallic molybdenum disulfide nanosheets for high-performance lithium–sulfur batteries10.1038/s41560-022-01175-7 ↗
3. Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
4. Mechanism investigation of iron selenide as polysulfide mediator for long-life lithium-sulfur batteries10.1016/j.cej.2021.129166 ↗
5. Review on Li-sulfur battery systems: an Integral perspective10.1002/aenm.201500212 ↗
6. Rechargeable lithium-sulfur batteries10.1021/cr500062v ↗
7. Catalytic effects in lithium-sulfur batteries: promoted sulfur transformation and reduced shuttle effect10.1002/advs.201700270 ↗
8. Promoting lithium polysulfide/sulfide redox kinetics by the catalyzing of zinc sulfide for high performance lithium-sulfur battery10.1016/j.nanoen.2018.06.046 ↗
9. Cation-doped ZnS catalysts for polysulfide conversion in lithium–sulfur batteries10.1038/s41929-022-00804-4 ↗
10. Promoting polysulfides redox conversion by sulfur-deficient ZnS1-x hollow polyhedrons for lithium-sulfur batteries
11. A special core-shell ZnS-CNTs/S@NH cathode constructed to elevate electrochemical performances of lithium-sulfur batteries10.1016/j.jcis.2021.04.063 ↗
12. A high-energy and long-cycling lithium-sulfur pouch cell via a macroporous catalytic cathode with double-end binding sites10.1038/s41565-020-00797-w ↗
13. Crystal Facet Engineering of MXene-Derived TiN Nanoflakes as Efficient Bidirectional Electrocatalyst for Advanced lithium-sulfur batteries10.1002/smll.202202917 ↗
14. Optimizing the p charge of S in p-block metal sulfides for sulfur reduction electrocatalysis10.1038/s41929-023-00912-9 ↗
15. Undercoordination Chemistry of sulfur Electrocatalyst in lithium-sulfur batteries
16. Powering lithium-sulfur battery performance by Propelling polysulfide redox at Sulfiphilic Hosts10.1021/acs.nanolett.5b04166 ↗
17. Monodispersed FeS2 Electrocatalyst Anchored to Nitrogen-doped carbon Host for lithium–sulfur batteries10.1002/adfm.202205471 ↗
18. Rational Construction of Fe2N@C yolk–shell Nanoboxes as multifunctional Hosts for Ultralong lithium–sulfur batteries10.1021/acsnano.9b06629 ↗
19. Preparation of porous yolk–shell S@Poly(vinyl alcohol) (PVA) particles for a lithium–sulfur battery cathode with high cycling and rate performances via a self-emulsification process
20. Size-controllable synthesis and enhanced photocatalytic activity of porous ZnS nanospheres10.1016/j.matlet.2012.05.134 ↗
21. Catalytic materials for lithium-sulfur batteries: mechanisms, design strategies and future perspective10.1016/j.mattod.2021.10.026 ↗
22. Rational design of a Ni(3)N(0.85) electrocatalyst to accelerate polysulfide conversion in lithium-sulfur batteries10.1021/acsnano.9b09371 ↗
23. Two birds with one stone: interfacial engineering of multifunctional janus separator for lithium-sulfur batteries10.1002/adma.202107638 ↗
24. Efficient Ni2Co4P3 Nanowires catalysts enhance Ultrahigh‐loading lithium–sulfur conversion in a Microreactor‐Like battery10.1002/adfm.201906661 ↗
25. A fundamental look at electrocatalytic sulfur reduction reaction10.1038/s41929-020-0498-x ↗
26. Burning lithium in CS2 for high-performing compact Li2S–graphene nanocapsules for Li–S batteries10.1038/nenergy.2017.90 ↗
27. Lithium-sulfur batteries: electrochemistry, materials, and prospects10.1002/anie.201304762 ↗
28. Reducing polarization of lithium-sulfur batteries via ZnS/reduced graphene oxide accelerated lithium polysulfide conversion
29. Metal–organic framework-based separator for lithium–sulfur batteries10.1038/nenergy.2016.94 ↗
30. Permselective graphene oxide membrane for highly stable and anti-self-discharge lithium-sulfur batteries10.1021/nn507178a ↗
31. Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design10.1038/ncomms11203 ↗