journal article·2025-11Open access

Bifunctional Co-B surface modification enhancing surface stability of single-crystalline ultra-high nickel ternary cathodes

Zhaoyang Feng, Xiaoya Wang, Xue Wen, Yite Liu, Chien-sheng Huang, Zhidu Zhou, Tao Huang, Aishui Yu

Abstract

Single-crystalline ultra-high nickel ternary cathodes have garnered significant attention as promising candidates for next-generation lithium-ion batteries due to their exceptional specific capacity and cost-effectiveness. However, severe interfacial side reactions during cycling, leading to rapid capacity decay, remain a major barrier to practical applications. In this work, we propose an innovative dual surface modification strategy that transforms residual lithium on the particle surface into LiCoO 2 and Li-B-O species. This bifunctional coating layer not only facilitates Li + diffusion but also suppresses parasitic side reactions and inhibits the formation of a detrimental rock-salt phase. The Co-B modified LiNi 0 . 94 Co 0 . 03 Mn 0 . 03 O 2 cathode delivers an impressive initial discharge capacity of 231.7 mAh·g −1 , while achieving 91.7 % capacity retention after 100 cycles at 1 C, significantly outperforming the 81.6 % retention of the pristine cathode. This work provides a novel strategy for enhancing the electrochemical stability of ultra-high nickel ternary cathodes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. A reflection on lithium-ion battery cathode chemistry10.1038/s41467-020-15355-0 ↗
2. Recent achievements toward the development of Ni-based layered oxide cathodes for fast-charging Li-ion batteries10.1039/D2NR05701H ↗
3. Long-life lithium-ion batteries realized by low-Ni, Co-free cathode chemistry10.1038/s41560-023-01267-y ↗
4. Insight of synthesis of single crystal Ni‐Rich LiNi1−x−yCoxMnyO2 cathodes10.1002/aenm.202303758 ↗
5. Layered lithium cobalt oxide cathodes10.1038/s41560-020-00764-8 ↗
6. Capacity fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗
7. Structural stability of LiNiO2 cycled above 4.2 V10.1021/acsenergylett.7b00304 ↗
8. Degradation mechanism of Ni-Rich cathode materials: focusing on particle interior10.1021/acsenergylett.2c01272 ↗
9. Variation of electronic conductivity within secondary particles revealing a capacity-fading mechanism of layered Ni-Rich cathode10.1021/acsenergylett.8b02043 ↗
10. Single-crystal nickel-rich layered-oxide battery cathode materials: synthesis, electrochemistry, and intra-granular fracture10.1016/j.ensm.2020.01.027 ↗
11. Comparative studies of polycrystal and single-crystal LiNi0.6Co0.2Mn0.2O2 in terms of physical and electrochemical performance10.1021/acssuschemeng.1c03002 ↗
12. Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries10.1016/j.nanoen.2020.104450 ↗
13. Spontaneous strain buffer enables superior cycling stability in single-crystal nickel-rich NCM cathode10.1021/acs.nanolett.1c03613 ↗
14. Review on electrode–electrolyte solution interactions, related to cathode materials for Li-ion batteries10.1016/j.jpowsour.2006.10.025 ↗
15. Revealing electrolyte oxidation via carbonate dehydrogenation on Ni-based oxides in Li-ion batteries by in situ fourier transform infrared spectroscopy10.1039/C9EE02543J ↗
16. Chemical versus electrochemical electrolyte oxidation on NMC111, NMC622, NMC811, LNMO, and conductive carbon10.1021/acs.jpclett.7b01927 ↗
17. Improvement of long-term cycling performance of Li[Ni0.8Co0.15Al0.05]O2 by AlF3 coating10.1016/j.jpowsour.2013.01.045 ↗
18. Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode10.1126/science.abc3167 ↗
19. In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes10.1038/s41467-021-25611-6 ↗
20. Tracking the fate of excess li in the synthesis of various Liy[Ni1−xMnx]O2 positive electrode materials under different atmospheres10.1149/1945-7111/ac5483 ↗
21. Impact of residual lithium on the adoption of high-nickel layered oxide cathodes for lithium-ion batteries10.1021/acs.chemmater.0c02808 ↗
22. Origin of carbon dioxide evolved during cycling of nickel-rich layered NCM cathodes10.1021/acsami.8b13158 ↗
23. Effect of Al doped in Ni-rich LiNi0.6Co0.3Ti0.1O2 cathode materials and their electrochemical performance for rechargeable lithium-ion batteries10.1016/j.matpr.2021.11.530 ↗
24. Reducing structural degradation of high-voltage single-crystal Ni-rich cathode through in situ doping strategy10.1007/s12598-023-02288-y ↗
25. Mitigating the kinetic hindrance of single‐crystalline Ni‐Rich cathode via surface gradient penetration of tantalum10.1002/anie.202111954 ↗
26. Fluorination from surface to bulk stabilizing high nickel cathode materials with outstanding electrochemical performance
27. Enhancing cyclic stability of lithium-rich manganese-based cathode materials via a three-in-one strategy with single crystallization, surface coating and bulk phase doping10.1016/j.actamat.2025.120951 ↗
28. Nano-TiO2 coated single-crystal LiNi0.65Co0.15Mn0.2O2 for lithium-ion batteries with a stable structure and excellent cycling performance at a high cut-off voltage10.1039/D2TA00135G ↗
29. Crucial role of thioacetamide for ZrO2 coating on the fragile surface of Ni-rich layered cathode in lithium ion batteries10.1016/j.jpowsour.2019.227625 ↗
30. Insights into the effects of coating and single crystallization on the rate performance and cycle life of LiNi0.9Mn0.1O2 cathode10.1016/j.jcis.2024.05.239 ↗
31. Improved cycling stability of high nickel cathode material for lithium ion battery through Al- and Ti-based dual modification10.1039/D1NR06005H ↗
32. Structure/interface synergy stabilizes high-nickel cathodes for lithium-ion batteries10.1039/D4TA01230E ↗
33. H3BO3 washed LiNi0.8Co0.1Mn0.1O2 with enhanced electrochemical performance and storage characteristics10.1016/j.jpowsour.2020.228940 ↗
34. A low-temperature coating method with H3BO3 for enhanced electrochemical performance of Ni-rich LiNi0.82Co0.12Mn0.06O2 cathode10.1016/j.electacta.2022.140564 ↗
35. Optimization of B2O3 coating process for NCA cathodes to achieve long-term stability for application in lithium ion batteries10.1016/j.energy.2021.119913 ↗
36. Revealing the degradation mechanism of Ni-rich cathode materials after ambient storage and related regeneration method10.1039/D0TA10378K ↗
37. Ultrathin li–si–o coating layer to stabilize the surface structure and prolong the cycling life of single-crystal LiNi0.6Co0.2Mn0.2O2 cathode materials at 4.5 V10.1021/acsami.0c22356 ↗
38. Enhanced high-voltage cycling stability of Ni-rich cathode materials via the self-assembly of Mn-rich shells10.1039/C9TA07147D ↗
39. Improving structure stability of single-crystalline Ni-rich cathode at high voltage by element gradient doping and interfacial modification10.1016/j.jechem.2024.10.015 ↗
40. Simultaneous B/W dual coating on ultra-high nickel single crystal cathode material for lithium-ion batteries10.1016/j.jpowsour.2023.233260 ↗
41. Enhancing the air stability of LiNi0.6Co0.2Mn0.2O2 cathode through WO3/Li2WO4 surface modification10.1016/j.jpowsour.2021.230605 ↗
42. Ni‐Rich/Co‐Poor layered cathode for automotive li‐ion batteries: promises and challenges10.1002/aenm.201903864 ↗
43. Dual-element-modified single-crystal LiNi0.6Co0.2Mn0.2O2 as a highly stable cathode for lithium-ion batteries10.1021/acsami.1c10799 ↗
44. Importance of high valence element Nb in Ni-Rich layered cathodes for high-voltage lithium-metal batteries10.1021/acsenergylett.4c01230 ↗
45. Locking oxygen in lattice: a quantifiable comparison of gas generation in polycrystalline and single crystal Ni-rich cathodes10.1016/j.ensm.2022.02.025 ↗
46. The role of oxygen release from Li- and Mn-Rich layered oxides during the first cycles investigated by On-Line electrochemical mass spectrometry10.1149/2.1001702jes ↗