journal article·2026-01Open access

Estimating the fatigue lifetime of mechanically reinforced membranes in fuel cell applications

Mohsen Mazrouei Sebdani, Erik Kjeang

Abstract

This work presents an innovative projection algorithm to estimate the fatigue lifetime of mechanically reinforced membranes in proton exchange membrane fuel cells (PEMFCs), using in-situ finite element modeling and pressure-differential accelerated mechanical stress testing (ΔP-AMST). The method uses critical accumulated plastic dissipation energy to extend ΔP-AMST results to real-world durability, reducing durability testing time and cost. The constitutive model accounts for temperature, humidity, strain rate, and compressive stress from clamping and gas pressure differentials and can thus be applied to both ΔP-AMST and in-situ fuel cell conditions. The findings of the validated CAPDE-based lifetime prediction model show that reinforced membranes are more vulnerable to fatigue under fuel cell operation at high temperatures. However, minimizing dry phases in humidity cycles and optimizing membrane swelling ratios can improve fatigue lifetime. Variations in the Young's modulus of adjacent layers have minimal effect, while reducing the channel-to-land width ratio improves membrane fatigue life but may impact fuel cell performance. These insights highlight the utility of the model as well as the importance of balancing design and operation for optimal PEMFC durability and efficiency. • Novel method projects membrane fatigue lifetime using ΔP-AMST and FEM modeling. • CAPDE introduced as a threshold for membrane fatigue failure prediction. • FEM model includes effects of RH, temperature, clamping, and pressure loads. • Reduced dry phase and higher swelling ratio boost membrane fatigue lifetime. • CL and GDL properties have minimal effect on membrane fatigue performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Adams · 2020
2. Multi-Year research, development, and demonstration plan
3. Micro and nano X-ray tomography of PEM fuel cell membranes after transient operation10.1149/1.2781026 ↗
4. Current understanding of chemical degradation mechanisms of perfluorosulfonic acid membranes and their mitigation strategies: a review10.1039/C7SE00038C ↗
5. Understanding the formation of pinholes in PFSA membranes with the essential work of fracture (EWF)10.1016/j.ijhydene.2013.03.031 ↗
6. Viscoelastic stress analysis of constrained proton exchange membranes under humidity cycling10.1115/1.2971045 ↗
7. Effect of hygral swelling and shrinkage on mechanical durability of fuel cell membranes10.1016/j.jpowsour.2019.04.081 ↗
8. Aspects of fatigue failure mechanisms in polymer fuel cell membranes10.1002/polb.22336 ↗
9. 4D in situ visualization of mechanical degradation evolution in reinforced fuel cell membranes10.1016/j.ijhydene.2020.02.013 ↗
10. Membrane accelerated stress test development for polymer electrolyte fuel cell durability validated using field and drive cycle testing10.1149/2.0101806jes ↗
11. Lai · 2009
12. Microstructural and mechanical characterization of catalyst coated membranes subjected to in situ hygrothermal fatigue10.1149/2.0471514jes ↗
13. Effects of cycle duration and test hardware in relative humidity cycling of a polymer electrolyte membrane10.1016/j.jpowsour.2020.228576 ↗
14. Rice · 1966
15. Numerical evaluation of crack growth in polymer electrolyte fuel cell membranes based on plastically dissipated energy10.1016/j.jpowsour.2016.03.031 ↗
16. Determining the critical plastically dissipated energy for fatigue crack growth in PEM fuel cell membrane and its environmental sensitivity10.1016/j.ijfatigue.2020.105697 ↗
17. A total dissipated energy theory of fatigue crack growth in ductile solids10.1016/S0142-1123(02)00073-7 ↗
18. Plastic dissipation in mixed-mode fatigue crack growth along plastically mismatched interfaces10.1016/j.ijfatigue.2006.01.012 ↗
19. Numerical evaluation of fatigue crack growth in polymers based on plastically dissipated energy10.1016/j.ijfatigue.2016.09.012 ↗
20. Role of plastic work in fatigue crack propagation in metals10.1016/0013-7944(79)90137-1 ↗
21. Quantitative measurement of energy associated with a moving fatigue crack. Fatigue mechanisms: advances in quantitative measurement of physical damage
22. Ex situ measurement and modelling of crack propagation in fuel cell membranes under mechanical fatigue loading10.1016/j.ijhydene.2017.06.151 ↗
23. Simulation of ionomer membrane fatigue under mechanical and hygrothermal loading conditions10.1016/j.jpowsour.2014.12.133 ↗
24. Predicting fatigue lifetimes of a reinforced membrane in polymer electrolyte membrane fuel cell using plastic energy10.1016/j.jpowsour.2022.231597 ↗
25. A rapid mechanical durability test for reinforced fuel cell membranes
26. In-situ pressure differential-accelerated mechanical fatigue testing and modeling of a reinforced fuel cell membrane10.1016/j.polymertesting.2024.108482 ↗
27. Creep and yield behaviour of semi-crystalline polyethylene in uniaxial tension
28. Stress-strain behavior of perfluorosulfonic acid membranes at various temperatures and humidities: experiments and phenomenological modeling10.1115/1.2971069 ↗
29. Simulation of fuel cell membrane durability under vehicle operation10.1016/j.jpowsour.2024.234855 ↗
30. Residual fatigue life modeling of fuel cell membranes10.1016/j.jpowsour.2020.228714 ↗
31. Numerical investigation of mechanical durability in polymer electrolyte membrane fuel cells10.1149/1.3328496 ↗
32. Mechanical properties of a reinforced composite polymer electrolyte membrane and its simulated performance in PEM fuel cells10.1016/j.jpowsour.2007.09.093 ↗
33. Time-dependent mechanical response of a composite PFSA membrane10.1016/j.jpowsour.2012.11.116 ↗
34. Structure/property relationship of Nafion XL composite membranes10.1016/j.memsci.2016.06.004 ↗
35. Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle10.1016/j.jpowsour.2006.05.020 ↗
36. Beer · 2020
37. On the constitutive relations for catalyst coated membrane applied to in-situ fuel cell modeling10.1016/j.jpowsour.2013.11.087 ↗
38. On the use of the goodman diagram for high cycle fatigue design10.1007/BF00012670 ↗
39. Mechanical degradation of fuel cell membranes under fatigue fracture tests10.1016/j.jpowsour.2014.10.135 ↗
40. 2010
41. Mench · 2008
42. Richard Budynas · 2020 · vol. 11