journal article·2012-04

Effects of pH on mechanical and morphological studies of silica filled polyvinyl chloride-50% epoxidized natural rubber (PVC-ENR50) nanocomposite

J. Karim, A. Ahmad, I. Abdullah, H. M. Dahlan

Publisher page

Abstract

Effects of pH on mechanical properties as well as morphological studies of sol–gel derived in situ silica in polyvinyl chloride-50% epoxidized natural rubber (PVC-ENR50) nanocomposites are reported. In particular, a range of acid concentrations was investigated. These nanocomposites were prepared by solution casting technique and tetraethoxysilane (TEOS) was used as the silica precursor. The prepared nanocomposites were characterized using tensile test, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The tensile test indicated that the highest mechanical strength was at 30% TEOS added for the nanocomposite prepared at pH 2.0. At pH 1.0 and 1.5 the maximum tensile strength reading was at 20% TEOS added with value of 24.3 and 24.5 MPa, respectively. SEM and TEM revealed the dispersion of silica particles in the polymer matrix. For nanocomposites prepared at pH 1.0 and 1.5, the silica particles were finely dispersed with the average size of 60 nm until 20% TEOS added. Meanwhile for nanocomposite prepared at pH 2.0, silica particles were homogenously distributed in the polymer matrix with average diameter of 30 nm until 30% TEOS and agglomerated after 30% TEOS loading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Silicone and Siloxane Chemistry · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Capek I (2006) Studies in interface science: nanocomposite structures and dispersions. Elsevier, Amsterdam
2. Chrusciel J, Slusarski L (2003) Mater Sci 21(4):461–469
3. Chernev GE, Samuneva BI, Djambaski PR, Salvado IMM, Fernandes HV (2006) Cent Euro Sci J 4(1):81–91
4. Ajayan PM, Schadler LS, Braun PV (2004) Nanocomposite science and technology. Wiley, Germany
5. Tanaka T, Montanari GC, Mulhaupt R (2004) IEEE Trans Dielec ElecInsul 11(5):763–78410.1109/TDEI.2004.1349782 ↗
6. Sadeghi M, Khanbabei G, Dehaghani AHS, Aravand MA, Akbarzade M, Khatti S (2008) J Membrane Sci 322(2):423–42810.1016/j.memsci.2008.05.077 ↗
7. Ikeda I, Kameda S (2004) J Sol-Gel Sci Tech 31:137–14210.1023/B:JSST.0000047975.48812.1b ↗
8. Kohjiya S, Ikeda Y (2003) J Sol-Gel Sci Tech 26:495–49810.1023/A:1020743214628 ↗
9. Zhu A, Cai A, Zhou W, Shi Z (2008) J Appl Polym Sci 254:374510.1002/app.29007 ↗
10. Min C, Wu T, Yang W, Chen C (2008) Compos Sci Tech 68:1570–157810.1016/j.compscitech.2007.09.021 ↗
11. Chrusciel J, Slusarski L (2003) Mater Sci 21:461–469
12. Bandyopadhyay A, Sarkar MD, Bhowmick AK (2005) J Mater Sci 40:53–6210.1007/s10853-005-5687-0 ↗
13. Bandyopadhyay A, Sarkar MD, Bhowmick AK (2006) J Mater Sci 41:5981–599310.1007/s10853-006-0254-x ↗
14. Bandyopadhyay A, Sarkar MD, Bhowmick AK (2004) J Appl Polym Sci 93:257910.1002/app.20681 ↗
15. Das G, Ferraioli L, Bettotti P, Angelis FD, Mariotto G, Pavesi L, Fabrizio ED (2008) Thin Solid Films 516:680410.1016/j.tsf.2007.12.007 ↗
16. Hashim A, Kawabata N, Kohjiya S (1995) J Sol-Gel Sci Tech 5:211–21810.1007/BF00487018 ↗
17. Brinker CJ, Scherer GW (1990) Sol-Gel Sci. Academic Press, New York
18. Bandyopadhyay A, Bhowmick AK (2004) Rubb Chem Tech 77:83010.5254/1.3547854 ↗
19. Chantara RT, Zaman K (1990) Polym Deg Stab 65:481
20. Mohammad N, Muchtar A, Ghazali MJ, Mohd D, Azhari CH (2008) Euro Polym J 24:538
21. Estella J, Echeverria JC, Laguna M, Garrido JJ (2007) J Non-Cryst Solids 353:286–29410.1016/j.jnoncrysol.2006.12.006 ↗
22. Curran MD, Stiegman AE (1999) J Non-Cryst Solids 249:62–6810.1016/S0022-3093(99)00237-9 ↗