The effect of titania precursors and ceria loadings on textural and chemical properties of TiO2–CeO2 and Pt–Rh/TiO2–CeO2
Source abstract
Abstract
The paper presents the results of the authors regarding the synthesis of TiO2–CeO2 mixed oxides using different precursors: (1) titanium isopropoxide and (2) titanium butoxide with different ceria loadings. The samples were characterized from chemical, structural and morphological point of view. The obtained powders were used as support for Pt–Rh impregnation and the influence the Pt–Rh in reduction of the support was established. From XPS, TPR and EPR analysis it was concluded that Ce3+ species are present in higher proportion (>50 %) in series supported Pt–Rh catalysts and it was taken as indicative of oxygen mobility. Correlation between ceria loading and percentage of Ce3+ in catalytic samples was observed. It was also evident that Rh addition allows increasing the reducibility of materials due to interactions metal-support.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions · Catalysis and Hydrodesulfurization Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Trovarelli A, Leitenburg C, Boaro M, Dolcetti G (1999) The utilization of ceria in industrial catalysis. Catal Today 50:353–36710.1016/S0920-5861(98)00515-X ↗
2. Trovarelli A (ed) (2002). Catalysis by ceria and related materials. Catalytic science series. V2. Imperial College Press, London10.1142/p249 ↗
3. Trovarelli A, Boaro M, Rocchini E, Leitenburg C, Dolcetti G (2001) Some recent developments in the characterization of ceria-based catalysts. J Alloy Comp 323–324:584–59110.1016/S0925-8388(01)01181-1 ↗
4. Kasemo B, Lausmaa J (1986) Surface science aspects on inorganic biomaterials. Crit Rev Biocompat 2:335–380
5. Tanaka K, Capule MFV, Hisanaga T (1991) Effect of crystallinity of TiO2 on its photocatalytic action. Chem Phys Lett 187(1–2):73–7610.1016/0009-2614(91)90486-S ↗
6. Karakitsou KE, Verykios XE (1993) Effects of altervalent cation doping of TiO2 on its performance as a photocatalyst for water cleavage. J Phys Chem 97:1184–118910.1021/j100108a014 ↗
7. Linsebigler AL, Lu G, Yates JT (1995) Photocatalysis on TiO2 surfaces: principles, mechanisms, and selected results. Chem Rev 95(3):735–75810.1021/cr00035a013 ↗
8. Hadjiivanov KI, Klissurski DG (1996) Surface chemistry of titania (anatase) and titania-supported catalysts. Chem Soc Rev 25:61–6910.1039/cs9962500061 ↗
9. Kholmanov IN, Barborini E, Vinati S, Piseri P, Podestà A, Ducati C, Lenardi C, Milani P (2003) The influence of the precursor clusters on the structural and morphological evolution of nanostructured TiO2 under thermal annealing. Nanotechnology 14:1168–117310.1088/0957-4484/14/11/002 ↗
10. Carp O, Huisman CL, Reller A (2004) Photoinduced reactivity of titanium dioxide. Prog Solid Stat Chem 32:33–17710.1016/j.progsolidstchem.2004.08.001 ↗
11. Rynkowski J, Farbotko J, Touroude R, Hilaire L (2000) Redox behaviour of ceria–titania mixed oides. Appl Catal A 203:335–34810.1016/S0926-860X(00)00497-X ↗
12. Dauscher A, Maire G (1991) Isomerisation and hydrogenolysis reactions of hexanes over platinum catalysts supported on physical mixtures of TiO2 and CeO2. J Mol Catal 69(2):259–27010.1016/0304-5102(91)80150-2 ↗
13. Agnoli S, Reeder AE, Senanayake SD, Hrbek J, Rodriguez JA (2014) Structure and special chemical reactivity of interface-stabilized cerium oxide nanolayers on TiO2 (110). Nanoscale 6:800–81010.1039/C3NR04623K ↗
14. Lee J, Gouma PI (2012) Chapter 11. Sol-gel processed oxide photocatalysts. In: Aparicio M, Jitianu A, Klein LC (eds) Sol-gel processing for conventional and alternative energy. Springer, New York
15. Reddy BM, Khan A, Yamada Y, Kobayashi T, Loridant S, Volta JC (2003) Structural characterization of CeO2–TiO2 and V2O5/CeO2–TiO2 catalysts by Raman and XPS techniques. J Phys Chem B 107:5162–516710.1021/jp0344601 ↗
16. Huheey JE (1978) Inorganic chemistry. Harper & Row, New York
17. Koebrugge GW, Winnubst L, Burggraaf AJ (1993) Thermal stability of nanostructured titania and titania-ceria ceramic powders prepared by the sol-gel process. J Matter Chem. 3(11):1095–110010.1039/JM9930301095 ↗
18. Lopez T, Rojas F, Alexander-Katz R, Galindo F, Balankin A, Buljan A (2004) Porosity, structural and fractal study of sol-gel TiO2–CeO2 mixed oxides. J Solid Stat Chem 177:1873–188510.1016/j.jssc.2004.01.013 ↗
19. Zaharescu M, Wittmar A, Teodorescu V, Andronescu C, Wittmar M, Veith M (2009) TiO2-CeO2 nanometric powders prepared by sol-gel method. Z Anorg Allg Chem 635:1915–192410.1002/zaac.200900186 ↗
20. Watanabe S, Ma X, Song C (2009) Characterization of structural and surface properties of nanocrystalline TiO2–CeO2 mixed oxides by XRD, XPS, TPR, and TPD. J Phys Chem C 113:14249–1425710.1021/jp8110309 ↗
21. Milenova K, Zaharieva K, Cherkezova-Zheleva Z, Kunev B, Blaskov V, Stambolova I, Mitov I (2014) Photodiscoloration of reactive black 5 dye using mechanochemically activated TiO2–CeO2 photocatalysts. Mater Methods Technol 8:241–249
22. Damyanova S, Bueno JMC (2003) Effect of CeO2 loading on the surface and catalytic behaviors of CeO2–Al2O3–supported Pt catalysts. Appl Catal A 253:135–15010.1016/S0926-860X(03)00500-3 ↗
23. Berger-Karin C, Wohlrab S, Rodemerck U, Kondratenko EV (2012) The tremendous effect of trace amounts of Rh on redox and catalytic properties of CeO2–TiO2 and Al2O3 in CH4 partial oxidation. Catal Commun 18:121–12510.1016/j.catcom.2011.12.001 ↗
24. Shi ZM, Yu WG, Bayar X (2004) Study of crystallization behavior of Ce4+-modified titania gels. Scr Mater 50:885–88910.1016/j.scriptamat.2003.12.006 ↗
25. Zhou G, Hanson J, Gorte RJ (2008) A thermodynamic investigation of the redox properties of ceria-titania mixed oxides. Appl Catal A 335:153–15810.1016/j.apcata.2007.11.011 ↗
26. Sun DL, Heusing S, Puetz J, Aegerter MA (2003) Influence of water on the electrochemical properties of (CeO2)x(TiO2)1−x and WO3 sol–gel coatings and electrochromic devices. Solid Stat Ion 165:181–18910.1016/j.ssi.2003.08.031 ↗
27. Sinha AK, Suzuki K (2005) Preparation and characterization of novel mesoporous ceria-titania. J Phys Chem B 109:1708–171410.1021/jp046391b ↗
28. Fang J, Bi X, Si D, Jiang Z, Huang W (2007) Spectroscopic studies of interfacial structures of CeO2-TiO2 mixed oxides. Appl Surf Sci 253:8952–896110.1016/j.apsusc.2007.05.013 ↗
29. Lowell S, Shields JE, Thomas MA, Thommes M (2004) Characterization of porous solids and powders: surface area, pore size and density. Kluwer Academic Publishers, The Netherlands10.1007/978-1-4020-2303-3 ↗
30. Zhang F, Chan SW, Spanier JE, Apak E, Jin Q, Robinson RD, Herman IP (2002) Cerium oxide nanoparticles: size-selective formation and structure analysis. Appl Phys Lett 80:127–12910.1063/1.1430502 ↗
31. Tsai SJ, Cheng S (1997) Effect of TiO2 crystalline structure in photocatalytic degradation of phenolic contaminants. Catal Today 33:227–23710.1016/S0920-5861(96)00152-6 ↗
32. Yao HC, Yao YFY (1984) Ceria in automotive exhaust catalysts. I. Oxygen storage. J Catal 86:254–26510.1016/0021-9517(84)90371-3 ↗
33. Hori CE, Ng KYS, Brenner A, Rahmoeller KM, Belton D (2001) The effects of aging temperature and aging time on the oxygen storage capacity of Pt-Rh/CeZrO2 catalysts. Braz J Chem Eng 18(1):23–3310.1590/S0104-66322001000100003 ↗
34. Burroughs P, Hamnett A, Orchard AF, Thornton G (1976) Satellite structure in the X-ray photoelectron spectra of some binary and mixed oxides of lanthanum and cerium. J Chem Soc, Dalton Trans 17:1686–169810.1039/dt9760001686 ↗
35. Li S, Huaqing Z, Zhangfeng Q, Guofu W, Yagang Z, Zhiwei W, Zhikai L, Gang C, Weiwen D, Zhonghua W, Lirong Z, Jing Z, Tiandou H, Jianguo W (2014) Morphologic effects of nano CeO2–TiO2 on the performance of Au/CeO2–TiO2 catalysts in low-temperature CO oxidation. Appl Catal B 144:498–50610.1016/j.apcatb.2013.07.049 ↗
36. Soria J, Coronado JM, Conesa JC (1996) Spectroscopic study of oxygen adsorption on CeO2/gamma-Al2O3 catalyst supports. J Chem Soc-Faraday Trans 92(9):1619–162610.1039/FT9969201619 ↗
37. Mamontov E, Egami T, Brezny R, Koranne M, Tyagi S (2000) Lattice defects and oxygen storage capacity of nanocrystalline ceria and ceria-zirconia. J Phys Chem B 104:11110–1111610.1021/jp0023011 ↗
38. Fornasiero P, Di-Monte R, Ranga-Rao G, Kaspar J, Meriani S, Trovalleri A, Graziani M (1995) Rh-loaded CeO2-ZrO2 solid solutions as highly efficient oxygen exchangers: dependence of the reduction behavior and the oxygen storage capacity on the structural properties. J Catal 151:168–17710.1006/jcat.1995.1019 ↗
39. Wang R, Xu H, Liu X, Ge Q, Li W (2006) Role of redox couples of Rh0/Rh δ+ and Ce4+/Ce3+ in CH4/CO2 reforming over Rh–CeO2/Al2O3 catalyst. Appl Catal A 305:204–21010.1016/j.apcata.2006.03.021 ↗
40. Vis JC, van’t Blik HFJ, Huizinga T, van Grondelle J, Prins R (1985) The morphology of rhodium supported on TiO2 and Al2O3 as studied by temperature-programmed reduction-oxidation and transmission electron microscopy. J Catal 95:333–34510.1016/0021-9517(85)90111-3 ↗
41. Cuauhtémoc, I. Catalizadores de Rh-soportado y su aplicación en la oxidación catalítica en fase Líquida de aditivos contaminantes presentes en la gasolina. PhD thesis, In Spanish. Chemical Department, Universidad Autónoma Metropolitana. http://148.206.53.84/tesiuami/UAMI14203.pdf