journal article·2008-09

Relationship between the microstructure, structure and magnetic properties in Ni3(XO4)2 orthophosphate and orthovanadate obtained by two different preparation methods

M. Pérez-Estébanez, J. Isasi-Marín

Publisher page

Abstract

Powders of composition Ni3(XO4)2 with X = P and V were synthesized by both the ceramic conventional and the Pechini-type in situ polymerizable complex (IPC) method. The Pechini-type IPC technique produces these materials as single phases at reduced temperatures (750–810 °C) as opposed to the conventional solid-state reaction methods in which processing temperatures higher than 800 °C are usually required to obtain a single-phase of these materials. Reflections peaks of the samples obtained in both cases can be indexed well with the standard patterns for Ni3(PO4)2 and Ni3(VO4)2 compounds. The lattice parameters of these materials were calculated by the Rietveld refinement method from X-ray diffraction data (XRD). The average crystal size as well as the crystallinity and morphology of the powder samples were characterized by scanning electron microscopy (SEM). The results show a clearly minor particle size by using the Pechini-IPC method than the ceramic one. Moreover, the magnetic behaviour was studied on powered samples by using magnetic susceptibility data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polyoxometalates: Synthesis and Applications · Crystal Structures and Properties · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Barré M, Crosnier-López MP et al (2007) J Solid State Chem 180:101110.1016/j.jssc.2006.12.032 ↗
2. Weiliu F, Xinyu S et al (2007) J Solid State Chem 180:28410.1016/j.jssc.2006.10.019 ↗
3. Descamps M, Duhoo T et al (2008) J Eur Ceram Soc 28:14910.1016/j.jeurceramsoc.2007.05.025 ↗
4. Anders GN (1982) Am Mineral 67:826
5. Forsyth JB, Wilkinson C et al (1988) J Phys C Solid State Phys 21:200510.1088/0022-3719/21/10/018 ↗
6. Anders GN (1984) Acta Cryst B 40:19110.1107/S0108768184001968 ↗
7. Isasi J (2001) J Alloys Compd 322:8910.1016/S0925-8388(00)01495-X ↗
8. Henry FP, Weller MT et al (2003) J Appl Cryst 36:136110.1107/S0021889803017515 ↗
9. Massa W, Yakubovich OV (2005) Solid State Sci 7:95010.1016/j.solidstatesciences.2005.03.005 ↗
10. Fukuda K, Iwata T et al (2006) J Solid State Chem 179:387010.1016/j.jssc.2006.08.024 ↗
11. Escobal J, Pizarro JI et al (2005) J Solid State Chem 178:262610.1016/j.jssc.2005.06.022 ↗
12. Kitamura N, Amezawa K et al (2004) J Electrochem Soc 152:A65810.1149/1.1861993 ↗
13. Fong SK, Donald IW et al (2007) J Alloys Compd 444–445:42410.1016/j.jallcom.2007.04.305 ↗
14. Franger S, Le Cras F et al (2003) J Powder Sources 119–121:25210.1016/S0378-7753(03)00242-8 ↗
15. Karpowich L, Wilcke S et al (2007) J Solid State Chem 180:84010.1016/j.jssc.2006.12.009 ↗
16. Zhang H, Lü M et al (2007) Mater Res Bull 42:114510.1016/j.materresbull.2006.09.002 ↗
17. Kakihana M, Yoshumura M (1999) Bull Chem Jpn 72:142710.1246/bcsj.72.1427 ↗
18. Schwartz RW (1997) Chem Mater 9:232510.1021/cm970286f ↗
19. Pérez-Estébanez M, Pastrana-Fábregas R et al (2006) J Mater Res 21:142710.1557/jmr.2006.0177 ↗
20. Pastrana-Fábregas R, Isasi-Marín J et al (2006) J Mater Res 21:225510.1557/jmr.2006.0272 ↗
21. Pechini MP (1967) US Patent no. 3:330, 11 July
22. Anderson HU, Pennell MJ, Guha LP (1987) In: Messing GL, Mazdiyasni KS, McCauley JW, Harber RA (eds) Advances in ceramics, ceramic powder science, vol 21. Am. Ceram. Soc., Westerville, OH, p 91
23. Lessing PA (1989) Am Ceram Soc Bull 168:1002
24. Kakihana M (1996) J Sol-Gel Sci Technol 6:710.1007/BF00402588 ↗
25. Mariappan CR, Galven C et al (2006) J Solid State Chem 179:45010.1016/j.jssc.2005.11.005 ↗
26. Roisnel T, Rodriguez Carvajal J, WinPLOTR, plotr@llb.saclay.cea.fr, http://www-llb.cea.fr/fullweb/winplotr/winplotr.htm
27. Shannon RD (1976) Acta Cryst A 32:75110.1107/S0567739476001551 ↗