journal article·2015-12

Sol–gel synthesis of TiO2-modified nanocomposite coatings on titanium

Wei Feng, Litong Guo, Xuemei Liu, Cheng Lin, Baoe Li, Yinghuai Qiang

Publisher page

Abstract

Titanium dioxide nanoparticles-modified nanocomposite coatings were synthesized on titanium by sol–gel process. The specimens were studied by differential scanning calorimetry, transmission electron microscopy, field-emission scanning electron microscopy and bonding tests. TEM results showed that TiO2 nanoparticles were adhered and enwrapped in the hybrid sol matrixes to form aggregates of TiO2 nanoparticles. The size of the particle aggregates increased from about 160 nm to above 500 nm with the content of the TiO2 particles increasing from 45 to 60 ma%. At the same time, the quantities of the microcracks on the coating surface gradually decreased. The solid phase content of the sols was increased by the addition of TiO2 nanoparticles, which avoided the formation of microcracks on the coatings surface. Compared to the uncoated group, the highest bonding strength improvement of about 24 % was obtained at the TiO2 content of 60 ma%. Graphical Abstract: [Figure not available: see fulltext.]
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Electrophoretic Deposition in Materials Science · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Mohedano M, Matykina E, Arrabal R, Pardo A, Merino MC (2014) Metal release from ceramic coatings for dental implants. Dent Mater 30(3):e28–e4010.1016/j.dental.2013.12.011 ↗
2. Elsaka SE, Hamouda IM, Elewady YA, Abouelatta OB, Swaind MV (2010) Effect of chromium interlayer on the shear bond strength between porcelain and pure titanium. Dent Mater 26:793–79810.1016/j.dental.2010.04.004 ↗
3. Guo LT, Shi Y, Guo LZ, Zhang Q, Xu C, Zhu YB, Guo TW (2012) Preparation and characterization of a titanium bonding porcelain. Mater Sci Eng C 32:1531–153510.1016/j.msec.2012.04.038 ↗
4. Thirugnanam A, Kumar TSS, Chakkingal U (2010) Tailoring the bioactivity of commercially pure titanium by grain refinement using groove pressing. Mater Sci Eng C 30:203–20810.1016/j.msec.2009.10.002 ↗
5. Zhao L, Wang H, Huo K, Cui L, Zhang W, Ni H, Zhang Y, Wu Z, Chu PK (2011) Antibacterial nano-structured titania coating incorporated with silver nanoparticles. Biomaterials 32:5706–571610.1016/j.biomaterials.2011.04.040 ↗
6. Wang SS, Yang X, Zhang LB, Guang HB, Shen M, Zhang FM (2010) Effect of NbN and ZrN films formed by magnetron sputtering on Ti and porcelain bonding. Surf Coat Tech 205:1886–189110.1016/j.surfcoat.2010.08.066 ↗
7. Guo LT, Tian JL, Wu J, Li B, Zhu YB, Xu C, Qiang YH (2013) Effect of nano-porous film on the bonding strength of titanium-porcelain. Mater Lett 109:140–14210.1016/j.matlet.2013.07.075 ↗
8. Guo LT, Tian JL, Wu J, Li B, Zhu YB, Qiang YH (2014) Sol–gel synthesis of nanocomposite coating to improve titanium—porcelain bonding. Mater Manu Proc 29(9):1025–102910.1080/10426914.2014.930957 ↗
9. ISO 9693 (1999) Geneva: International Organization for Standardization