Study on the synthesis of Fe2O3-, MgO-cored glass by sol-gel method and their application in agricultural chemistry
Source abstract
Abstract
Fe2O3- and MgO-cored materials with SiO2–P2O5 binary shells were synthesized using the sol-gel method and the influence of P2O5 content on their release characteristics was evaluated. In the Fourier transform infrared (FT-IR) spectrum of the Fe2O3-cored sample, the peak corresponding to the P–O–P bond was not observed. In addition, the peaks associated with P=O and HPO4− were clearly observed in contrast to the MgO-cored sample. It is possible that the Fe3+ ion reacted with phosphoric acid to form a FeH2PO42+ complex, and it was assumed that the release characteristics of the Fe2O3-cored sample would be less affected by the shell composition. From the X-ray diffraction (XRD) measurements, it was confirmed that amorphous shells were obtained, and the transmission electron microscopy (TEM) images showed that the Fe2O3-cored samples exhibited a spherical shape irrespective of the shell composition, whereas the MgO-cored sample exhibited the spherical shape only for the MS8P2 sample. The inductively coupled plasma (ICP) measurements showed that the MS8P2 sample exhibited controlled-release characteristics. As the phosphate content of the shell was increased, the release start time was shortened. A comprehensive review of the results of this study showed that the MS8P2 sample could be grafted as a nanopowder for use as a controlled-release fertilizer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer-Based Agricultural Enhancements · Clay minerals and soil interactions · Layered Double Hydroxides Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Shaviv A, Raban S, Zaidel E (2003) Environ Sci Technol 37:2251–225610.1021/es011462v ↗
2. Du CW, Zhou JM, Shaviv A (2006) J Polym Environ 14(3):223–23010.1007/s10924-006-0025-4 ↗
3. Azeem B, Kushaari K, Man ZB, Basit A, Thanh TH (2014) J Control Release 181:11–2110.1016/j.jconrel.2014.02.020 ↗
4. Carter CB, Norton MG (2012) Ceramic materials Science and Engineering. Springer, New York, NY
5. Warman PR, Termeer WC (2005) Bioresour Technol 96:1029–103810.1016/j.biortech.2004.09.014 ↗
6. De Weger LA, Van Arendonk JJ, Recourt K, Hofstad GA, Weisbeek PJ, Lugtenberg B (1988) J Bacteriol 170(10):4693–469810.1128/jb.170.10.4693-4698.1988 ↗
7. Brow RK (2000) J Non Cryst Solids 263&264:1–2810.1016/S0022-3093(99)00620-1 ↗
8. Carta D, Pickup DM, Knowles JC, Ahmed I, Smith ME, Newport RJ (2007) J Non Cryst Solids 353(18-21):1759–176510.1016/j.jnoncrysol.2007.02.008 ↗
9. Krimi S, El Jazouli A, Rabardel L, Couzi M, Mansouri I, Le Flem G (1993) J Solid State Chem 102(2):400–40710.1006/jssc.1993.1051 ↗
10. Kim CW, Kim JY, Maeng SJ, Park JK, Hwang TW (2006) J Nucl Fuel Cycle Waste Technol 4(3):227–234
11. D’apuzzo M, Aronne A, Esposito S, Pernice P (2000) J Sol Gel Sci Technol 17(3):247–25410.1023/A:1008720223563 ↗
12. Dayanand G, Bhikshamaiah G, Jayatyagaraju V, Salagram M, Krishna Murthy ASR (1996) J Mater Sci 31:1945–196710.1007/BF00356615 ↗
13. Hsu PH (1976) Water Res 10:903–90710.1016/0043-1354(76)90026-9 ↗
14. Filho OP, La Torre GP, Hench LL (1996) J Biomed Mater Res 30(4):509–51410.1002/(SICI)1097-4636(199604)30:4<509::AID-JBM9>3.0.CO;2-T ↗
15. Sun KH (1947) J Am Ceram Soc 30(9):277–28110.1111/j.1151-2916.1947.tb19654.x ↗
16. Stoch A, Jastrzębski W, Brożek A, Stoch J, Szaraniec J, Trybalska B, Kmita G (2000) J Mol Struct 555(1-3):375–38210.1016/S0022-2860(00)00623-2 ↗
17. Nguyen C, Kim J (2008) Polymdegrad Stabil 96(6):1037–104310.1016/j.polymdegradstab.2008.03.024 ↗
18. Hori K, Iwama A, Fukuda T (1990) Propell Explos Pyrot 15(3):99–10210.1002/prep.19900150307 ↗
19. Trenkel ME (1997) Controlled-release and stabilized fertilizers in agriculture. International fertilizer industry association, Paris