journal article·2018-12

Relation between chemical composition of sols and surface free energy of inorganic-organic films

Marianna Čierniková, Petra Balážová, Alfonz Plško, Petr Exnar, Jana Pagáčová, Iveta Papučová

Publisher page

Abstract

The presented study deals with relation between chemical composition of precursor sols and surface free energy of inorganic-organic films. Inorganic-organic films were prepared from precursor sols in “tetraethoxysilane (TEOS) - triethoxy(octyl)silane (OTES) - distilled water - nitric acid - isopropyl alcohol” system. The fifteen sols were prepared, where the ratio of K = x(OTES)/(x(TEOS) + x(OTES)) varied from 0 to 0.5 and ratio of R = x(H2O)/(x(TEOS) + x(OTES)) varied from 2 to 6. The relationship between chemical composition and surface free energy of inorganic-organic films was quantified by model selection approach. Model, which describes the studied relationship in the best way, was selected on the basis of Akaike information criterion. Based on the analysis of selected (the best describing) model, it was found out that the surface free energy as well as its dispersion and polar component are dependent only on K ratio in observed range of K and R values. Form the physico-chemical aspect, the observed dependences of surface free energy, its dispersive and polar component on chemical composition of precursor sols are explained by the influence of octyl groups on the sequences of hydrolysis and condensation reactions leading to formation of particles in precursor sol. In addition, the arrangement of octyl groups is used for explanation of particles arrangement on film surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Silicone and Siloxane Chemistry · Aerogels and thermal insulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. Zheng SX, Li JH (2010) Inorganic-organic sol gel hybrid coatings for corrosion protection of metals. J Sol-Gel Sci Technol 54:174–18710.1007/s10971-010-2173-1 ↗
2. Oyola-Reynoso S, Wang Z, Chen J, Çınar S, Chang B, Thuo M (2015) Revisiting the challenges in fabricating uniform coatings with polyfunctional molecules on high surface energy materials. Coatings 5:1002–101810.3390/coatings5041002 ↗
3. Yang H, Pi P, Cai Z-Q, Wen X, Wang X, Cheng J, Yang Z-r (2010) Facile preparation of super-hydrophobic and super-oleophilic silica film on stainless steel mesh via sol-gel process. Appl Surf Sci 256:4095–410210.1016/j.apsusc.2010.01.090 ↗
4. Shen K, Yu M, Li Q, Sun W, Zhang X, Quan M, Liu Z, Shi S, Gong YK (2017) Synthesis of fluorine-free polymeric water-repellent agent for creation of superhydrophobic fabrics. Appl Surf Sci 426:694–70310.1016/j.apsusc.2017.07.245 ↗
5. Raimondo M, Veronesi F, Boveri G, Guarini G, Motta A, Zanoni R (2017) Superhydrophobic properties induced by sol-gel routes on copper surfaces. Appl Surf Sci 422:1022–102910.1016/j.apsusc.2017.05.257 ↗
6. Drechsler A, Estel K, Caspari A, Bellman C, Harenburg J, Meier F, Zschuppe M (2017) New strategies to create technologically relevant superomniphobic coatings on sol-gel base. Progr Org Coat 109:160–17110.1016/j.porgcoat.2017.04.030 ↗
7. Carbajal-de la Torre G, Espinosa-Medina MA, Martinez-Villafañe A, Gonzalez-Rodriguez JG, Gastaño VM (2009) Study of ceramic and hybrid coatings produced by sol-gel method for corrosion protection. Open Corros J 2:197–20310.2174/1876503300902010197 ↗
8. Kickelbick G (2014) Hybrid materials – past, present and future. Hybrid Mater 1:39–51
9. Schroeder G, Łęska B, Kurczewska J (2012) Functionalized hybrid materials – from concept, through laboratory to business. Chemik 66:196–205
10. Kickelbick G (2007) Introduction in hybrid materials. In: Kickelbick G (ed.) Hybrid Materials: Synthesis, Characterization and Applications. Wiley, Weinheim, p 1–48
11. Sanchez C, Julián B, Belleville P, Popall M (2005) Applications of hybrid organic-inorganic nanocomposites. J Mater Chem 15:3559–359210.1039/b509097k ↗
12. Bhushan B, Jung YC (2011) Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction. Prog Mater Sci 56:1–10810.1016/j.pmatsci.2010.04.003 ↗
13. Wang SS, Luo SS (2012) Fabrication of transparent superhydrophobic silica-based film on a glass substrate. Appl Surf Sci 258:5443–545010.1016/j.apsusc.2012.02.032 ↗
14. Latte SS, Imai H, Ganesan V, Rao AV (2009) Superhydrophobic silica films by sol-gel co-precursor method. Appl Surf Sci 256:217–22210.1016/j.apsusc.2009.07.113 ↗
15. Wen X-F, Wang K, Pi P-H, Yang J-X, Cai Z-Q, Zhang L-j, Qian Y, Yang ZR, Zheng D-f, Cheng J (2011) Organic-inorganic hybrid superhydrophobic surfaces using methyltriethoxysilane and tetraethoxysilane sol-gel derived materials in emulsion. Appl Surf Sci 258:991–99810.1016/j.apsusc.2011.06.085 ↗
16. Ma M, Hill RM (2006) Superhydrophobic surfaces. Curr Opin Colloid Interface Sci 11:193–20210.1016/j.cocis.2006.06.002 ↗
17. Plško A, Pagáčová J, Šulcová J, Bieliková B, Tomagová M, Michálková K, Rodová A (2014) Nanocomposite films prepared from stabilized aqueous SiO2 sols. J Non-Cryst Solids 401:129–13310.1016/j.jnoncrysol.2014.01.045 ↗
18. Huang S-I, Shen Y-J, Chen H (2009) Study on the hydrophobic surfaces prepared by two-step sol-gel process. Appl Surf Sci 255:7040–704610.1016/j.apsusc.2009.03.037 ↗
19. Ramezani M, Vaezi MR, Kazemzadeh A (2015) Study water repellency of the modified silica films using different organoalkoxysilanes. Appl Phys A 119:845–85210.1007/s00339-015-9047-x ↗
20. Zhang F, Shi Z, Jiang Y, Xu C, Wu Z, Wang Y, Peng C (2017) Fabrication of transparent superhydrophobic glass with fibered-silica network. Appl Surf Sci 407:526–53110.1016/j.apsusc.2017.02.207 ↗
21. Fabbri P, Messori M, Montecchi M, Pilati F, Taurino R, Tonelli C, Toselli M (2006) Surface properties of fluorinated hybrid coatings. J Appl Polym Sci 102:1483–148810.1002/app.24350 ↗
22. Kim EK, Kim JY, Kim SS (2013) Synthesis of superhydrophobic SiO2 layers via combination of surface roughness and fluorination. J Solid State Chem 197:23–2810.1016/j.jssc.2012.08.017 ↗
23. Xiong D, Liu G, Scott Duncan EJ (2013) Robust amphiphobic coatings from bi-functional silica particles on flat substrates. Polym (Guildf) 54:3008–301610.1016/j.polymer.2013.03.051 ↗
24. Mou CY, Yuan WL, Shih ChH (2013) Preparation and characterization of ultra-thin amphiphobic coatings on silicon wafers. Thin Solids Films 537:202–20710.1016/j.tsf.2013.04.027 ↗
25. Kumar D, Wu X, Fu Q, Ho JWC, Kanhere PD, Li L, Chen Z (2015) Development of durable self-cleaning coatings using organic–inorganic hybrid sol–gel method. Appl Surf Sci 344:205–21210.1016/j.apsusc.2015.03.105 ↗
26. Liu S, Liu X, Latthe SS, Gao L, An S, Yoon SS, Liu B, Xing R (2015) Self-cleaning transparent superhydrophobic coatings through simple sol–gel processing of fluoroalkylsilane. Appl Surf Sci 351:897–90310.1016/j.apsusc.2015.06.016 ↗
27. Hancer M, Arkaz H (2015) A facile fabrication of superhydrophobic nanocomposite coating with contact angles approaching the theoretical limit. Appl Surf Sci 354:342–34610.1016/j.apsusc.2015.05.113 ↗
28. Oldani V, Sergi G, Pirola C, Bianchi CL (2016) Use of a sol-gel hybrid coating composed by a fluoropolymer and silica for the mitigation of mineral fouling in heat exchangers. Appl Therm Eng 106:427–43110.1016/j.applthermaleng.2016.06.014 ↗
29. Liu S, Latthe SS, Yang H, Liu B, Xing R (2015) Raspberry-like superhydrophobic silica coatings with self-cleaning properties. Ceram Int 41:11719–1172510.1016/j.ceramint.2015.05.137 ↗
30. Wang Z, Cousins IT, Scheringer M, Buck RC, Hungerbühler K (2014) Global emission inventories for C 4 –C 14 perfluoroalkyl carboxylic acid (PFCA) homologues from 1951 to 2030, Part I: production and emissions from quantifiable sources. Environ Int 70:62–7510.1016/j.envint.2014.04.013 ↗
31. Wang Z, Cousins IT, Scheringer M, Buck RC, Hungerbühler K (2014) Global emission inventories for C 4 –C 14 perfluoroalkyl carboxylic acid (PFCA) homologues from 1951 to 2030, Part II: the remaining pieces of the puzzle. Environ Int 69:166–17610.1016/j.envint.2014.04.006 ↗
32. Wang Z, Cousins IT, Scheringer M, Hungerbuehler K (2015) Hazard assessment of fluorinated alternatives to long-chain perfluoroalkyl acids (PFAAs) and their precursors: Status quo, ongoing challenges and possible solutions. Environ Int 75:172–17910.1016/j.envint.2014.11.013 ↗
33. Scheringer M, Trier X, Cousins IT, Voogt P, Fletcher T, Wang Z, Webster TF (2014) Helsingør statement on poly- and perfluorinated alkyl substances (PFASs). Chemosphere 114:337–33910.1016/j.chemosphere.2014.05.044 ↗
34. Zhang XG, Wang HY, Liu ZH, Zhu YX, Wu SQ, Wang CJ, Zhu YJ (2017) Fabrication of durable fluorine-free superhydrophobic polyethersulfone (PES) composite coating enhanced by assembled MMT-SiO2 nanoparticles. Appl Surf Sci 396:1580–158810.1016/j.apsusc.2016.11.217 ↗
35. Jeevajothi K, Crossiya D, Subasri R (2012) Non-fluorinated, room temperature curable hydrophobic coatings by sol–gel process. Ceram Int 38:2971–297610.1016/j.ceramint.2011.11.075 ↗
36. Uricanu V, Donescu D, Banu AG, Serban S, Olteanu M, Dudau M (2004) Organic–inorganic hybrids made from polymerizable precursors. Mater Chem Phys 85:120–13010.1016/j.matchemphys.2003.12.024 ↗
37. Brambilla R, Pires GP, da Silveira NP, dos Santos JHZ, Miranda MSL, Frost RL (2008) Spherical and lamellar octadecylsilane hybrid silicas. J Non-Cryst Solids 354:5033–504010.1016/j.jnoncrysol.2008.07.031 ↗
38. Das S, Jain TK, Maitra A (2002) Inorganic-organic nanoparticles from n-octyl triethoxy silane. J Colloid Interface Sci 252:82–8810.1006/jcis.2002.8404 ↗
39. Parale VG, Mahadik DB, Mahadik SA, Kavale MS, Wagh PB, Gupta SC, Rao AV (2013) OTES modified transparent dip coated silica coatings. Ceram Int 39:835–84010.1016/j.ceramint.2012.05.079 ↗
40. Brinker CJ, Scherer GW (1989) Sol-gel science: the physics and chemistry of sol-gel processing. Academic Press, Boston
41. Sakka S (2005) Handbook of sol-gel science and technology: processing, characterization and applications. Kluwer Academic Publishers, Boston
42. Plško A, Exnar P (1989) The application of sol-gel methods for the preparation of advanced materials, namely glasses. Silikaty 33:69–84
43. Ramezani M, Vaezi MR, Kazemzdeh A (2015) The influence of hydrophobic agent, catalyst, solvent and water content on the wetting properties of the silica films prepared by one-step sol-gel method. Appl Surf Sci 326:99–10610.1016/j.apsusc.2014.11.013 ↗
44. Yang X, Zhu L, Chen Y, Bao B, Xu J, Zhou W (2016) Controlled hydrophilic/hydrophobic property of silica films by manipulating the hydrolysis and condensation of tetraethoxysilane. Appl Surf Sci 376:1–910.1016/j.apsusc.2016.02.068 ↗
45. Pantoja M, Abenojar J, Martinez MA (2017) Influence of type of solvent on the development of superhydrophobicity from silane-based solution containing nanoparticles. Appl Surf Sci 397:87–9410.1016/j.apsusc.2016.11.099 ↗
46. Laine RM (2005) Nanobuilding blocks based on the [OSiO1.5]x (x=6, 8, 10) octasilsesquioxanes. J Mater Chem 15:3725–374410.1039/b506815k ↗
47. Kannan RY, Salacinski HJ, Butler PE, Seifalian AM (2005) Polyhedral oligomeric silsesquioxane nanocomposites: the next generation material for biomedical applications. Acc Chem Res 38:879–88410.1021/ar050055b ↗
48. Chuang W-P, Sheen Y-C, Wei S-M, Yen M-Y, Ma C-CM (2013) Structural control of silane-grafted polymethylsilsesquioxane. Eur Polym J 49:646–65110.1016/j.eurpolymj.2012.11.003 ↗
49. Mori H (2012) Design and synthesis of functional silsesquioxane-based hybrids by hydrolytic condensation of bulky triethoxysilanes. Int J Polym Sci 2012:1710.1155/2012/173624 ↗
50. Fortuniak W, Chojnowski J, Slomkowski S, Pospiech P, Kurjata J (2013) Route to hydrophilic, hydrophobic and functionalized cross-linked polysiloxane microspheres. Polym (Guildf) 54:3156–316510.1016/j.polymer.2013.04.017 ↗
51. Simionescu B, Bordianu I-E, Aflori M, Doroftei F, Mares M, Patras X, Nicolescu A, Olaru M (2012) Hierarchically structured polymer blends based on silsesquioxane hybrid nanocomposites with quaternary ammonium units for antimicrobial coatings. Mater Chem Phys 134:190–19910.1016/j.matchemphys.2012.02.051 ↗
52. Rupp F, Gittens RA, Scheideler L, Marmur A, Boyan BD, Schwartz Z, Geis-Gerstorfer J (2014) A review on the wettability of dental implant surfaces I: theoretical and experimental aspects. Acta Biomater 10:2894–290610.1016/j.actbio.2014.02.040 ↗
53. Boinovich L, Emelyanenko A (2011) Wetting and surface forces. Adv Colloid Interface Sci 165:60–6910.1016/j.cis.2011.03.002 ↗
54. Kwok DY, Neumann AW (2000) Contact angle interpretation in terms of solid surface tension. Colloids Surf A Physicochem Eng Asp 161:31–4810.1016/S0927-7757(99)00323-4 ↗
55. Shalel-Levanon S, Marmur A (2003) Validity and accuracy in evaluating surface tension of solids by additive approaches. J Colloid Interface Sci 262:489–49910.1016/S0021-9797(02)00231-X ↗
56. Erbil HY (2014) The debate on the dependence of apparent contact angles on drop contact area or three-phase contact line: A review. Surf Sci Rep 69:325–36510.1016/j.surfrep.2014.09.001 ↗
57. Yan YY, Gao N, Barthlott W (2011) Mimicking natural superhydrophobic surfaces and grasping the wetting process. Adv Colloid Interface Sci 169:80–10510.1016/j.cis.2011.08.005 ↗
58. Fowkes FM (1964) Attractive forces at interfaces. Ind Eng Chem 56:40–5210.1021/ie50660a008 ↗
59. Fowkes FM (1972) Donor-acceptor interactions at interfaces. J Adhes 4:155–15910.1080/00218467208072219 ↗
60. Owens DK, Wendt RC (1969) Estimation of surface free energy of polymers. J Appl Polym Sci 13:1741–174710.1002/app.1969.070130815 ↗
61. Żenkiewicz M (2007) Methods for the calculation of surface free energy of solids. J Achiev Mater Manuf Eng 24:137–145
62. Żenkiewicz M (2007) Comparative study on the surface free energy of a solid calculated by different methods. Polym Test 26:14–1910.1016/j.polymertesting.2006.08.005 ↗
63. Kwok DY, Neumann AW (1999) Contact angle measurement and contact angle interpretation. Adv Colloid Interface Sci 81:167–24910.1016/S0001-8686(98)00087-6 ↗
64. Chibowski E, Perea-Carpio R (2002) Problems of contact angle and solid surface free energy determination. Adv Colloid Interface Sci 98:245–26410.1016/S0001-8686(01)00097-5 ↗
65. Tavana H, Neumann AW (2007) Recent progress in the determination of solid surface tensions from contact angles. Adv Colloid Interface Sci 132:1–3210.1016/j.cis.2006.11.024 ↗
66. Della Volpe C, Maniglio D, Brugnara M, Siboni S, Morra M (2004) The solid surface free energy calculation I. In defense of the multicomponent approach. J Colloid Interface Sci 271:434–45310.1016/j.jcis.2003.09.049 ↗
67. Siboni S, Della Volpe C, Maniglio D, Brugnara M (2004) The solid surface free energy calculation II. The limits of the Zisman and of the “equation-of-state” approaches. J Colloid Interface Sci 271:454–47210.1016/j.jcis.2003.09.050 ↗
68. Rudawska A, Jacniacka E (2009) Analysis for determining surface free energy uncertainty by the Owen–Wendt method. Int J Adhes Adhes 29:451–45710.1016/j.ijadhadh.2008.09.008 ↗
69. Meloun M, Militký J (2004) Statistical analysis of experimental data. 2nd edn. Academia, Prague, Czech.
70. Kluvanek I, Mišík L, Švec M (1971) Mathematics I. Alfa, Bratislava, Slovakia, p 666–679
71. McQuarrie A, Tsai ChL (1999) Model selection in orthogonal regression. Stat Probab Lett 45:341–34910.1016/S0167-7152(99)00076-0 ↗
72. Johnson JB, Omland KS (2004) Model selection in ecology and evolution. Trends Ecol Evol 19:101–10810.1016/j.tree.2003.10.013 ↗
73. Castle JL, Qin X, Reed WR (2013) Using model selection algorithms to obtain reliable coefficient estimates. J Econ Surv 27:269–29610.1111/j.1467-6419.2011.00704.x ↗
74. Akaike H (1973) Information theory and an extension of maximum likelihood principle. In: Petrov BN, Csáki F (eds.) 2nd International Symposium on Information Theory, Akademia Kiado, Budapest, p 267–281
75. Akaike H (1974) A new look at the statistical model identification. IEEE Trans Autom Control AC 19:716–72310.1109/TAC.1974.1100705 ↗
76. Cavanaugh JE (2004) Criteria for linear model selection based on Kullback’s symmetric divergence. Aust N Y J Stat 46:257–27410.1111/j.1467-842X.2004.00328.x ↗
77. Kim HJ, Cavanaugh JE (2005) Model selection criteria based on Kullback information measures for nonlinear regression. J Stat Plan Infer 134:332–34910.1016/j.jspi.2004.05.002 ↗
78. Emiliano PC, Vivanco MJF, de Menezes FS (2014) Information criteria: How do they behave in different models? Comput Stat Data An 69:141–15310.1016/j.csda.2013.07.032 ↗
79. Yates D, Moore DS, McCabe GP (1999) The practice of statistics, 1st edn. Freeman, New York
80. Snedecor GW, Cochran WG (1989) Statistical methods, 8th edn. Iowa State University Press, Ames