Fabrication of TMPTMA foams with SiO2 sub-microspheres gradient doped via slope-rotation method
Source abstract
Abstract
In this paper, we report a novel approach to fabricate gradient doped porous material via the slope-rotation method. By using dibutyl phthalate as the solvent, benzoin methyl ether as the photoinitiator, and silica sub-microsphere as filler, gradient doped trimethylolpropane trimethacrylate (TMPTMA) foams were fabricated after rotating and mixing, ultraviolet curing, and CO2 supercritical drying. The microstructure and gradient distribution of silica fillers were characterized by nitrogen adsorption, scanning electron microscopy, UV–visible absorption spectrum, and thermogravimetric analysis. The mechanical property was obtained by dynamic mechanical analysis. The results indicated that the approach was an effective method to fabricate gradient doped TMPTMA foams and had the potential to prepare any kind of gradient doped porous material derived from a sol–gel process. The mechanical property was further reinforced by gradient doping of silica sub-microspheres.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicone and Siloxane Chemistry · Aerogels and thermal insulation · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Lawrence WH (1998) Aerogel applications. J Non-Cryst Solids 225:335–34210.1016/S0022-3093(98)00135-5 ↗
2. Wu D, Xu F, Sun B, Fu R, He H, Matyjaszewski K (2012) Design and preparation of porous polymers. Chem Rev 112:3959–401510.1021/cr200440z ↗
3. Cui L, Kiernan S, Gilchrist MD (2009) Designing the energy absorption capacity of functionally graded foam materials. Mater Sci Eng A 507:215–22510.1016/j.msea.2008.12.011 ↗
4. Sandford SA, Aleon J et al. (2006) Organics captured from comet 81P Wild 2 by the Stardust spacecraft. Science 314:1720–172410.1126/science.1135841 ↗
5. Dhakate SR, Subhedar KM, Singh BP (2015) Polymer nanocomposite foam filled with carbon nanomaterials as an efficient electromagnetic interference shielding material. RSC Adv 5:43036–4305710.1039/C5RA03409D ↗
6. Chen L, Liu C, Liu K, Meng C, Hu C, Wang J, Fan S (2011) High-performance, low-voltage, and easy-operable bending actuator based on aligned carbon nanotube/polymer composites. ACS Nano 5:1588–159310.1021/nn102251a ↗
7. Shim SE, Isayev AI (2004) Rheology and structure of precipitated silica and poly(dimethyl siloxane) system. Rheol Acta 43:127–13610.1007/s00397-003-0327-6 ↗
8. Brothers AH, Dunand DC (2008) Mechanical properties of a density-graded replicated aluminum foam. Mater Sci Eng A 489:439–44310.1016/j.msea.2007.11.076 ↗
9. Hangai Y, Takahashi K, Utsunomiya T, Kitahora S, Kuwazuru O, Yoshikawa N (2012) Fabrication of functionally graded aluminum foam using aluminum alloy die castings by friction stir processing Mater Sci Eng A 534:716–71910.1016/j.msea.2011.11.100 ↗
10. He SY, Zhang Y, Dai G, Jiang JQ (2014) Preparation of density-graded aluminum foam. Mater Sci Eng A 618:496–49910.1016/j.msea.2014.08.087 ↗
11. Gupta N et al. (2007) A functionally graded syntactic foam material for high energy absorption under compression. Mater Lett 61:979–98210.1016/j.matlet.2006.06.033 ↗
12. Kaune G, Müller-Buschbaum P (2010) Gradient-doping of a conductive polymer film with a layer-by-layer approach. Phys Status Solidi RRL 4:52–5410.1002/pssr.200903413 ↗
13. Ishiguro Y, Inagi S, Fuchigami T (2011) Gradient doping of conducting polymer films by means of bipolar electrochemistry. Langmuir 27:7158–716210.1021/la200464t ↗
14. Xu EY et al. (2010) Doped carbon nanotube array with a gradient of nitrogen concentration. Carbon 48:3097–310210.1016/j.carbon.2010.04.046 ↗
15. Yang Z et al. (2007) Comparison between gradient-doping GaAs photocathode and uniform-doping GaAs photocathode. Appl Opt 46:7035–703910.1364/AO.46.007035 ↗
16. Pang X et al. (2018) Facile fabrication of gradient density organic aerogel foams via density gradient centrifugation and UV curing in one-step. J Sol-Gel Sci Technol 85:243–25010.1007/s10971-017-4529-2 ↗
17. Camenzind A, Schweizer T, Sztucki M, Pratsinis SE (2010) Structure and strength of silica-PDMS nanocomposites. Polymer 51:1796–180410.1016/j.polymer.2010.02.030 ↗
18. Suzuki N, Kamachi Y, Takai K, Kiba S, Sakka Y, Miyamoto N, Yamauchi Y (2014) Effective use of mesoporous silica filler: comparative study on thermal stability and transparency of silicone rubbers loaded with various kinds of silica particles. Eur J Inorg Chem 2014:2773–277810.1002/ejic.201301615 ↗
19. Stober W, Fink A (1968) Controlled growth of monodisperse silica spheres in the micron size range. J Colloid Interface Sci 26:62–6910.1016/0021-9797(68)90272-5 ↗
20. Neville F, Dixon L, Hyde E (2016) A comparative study of hydrophobic silica particle synthesis. Adv Powder Technol 27:2317–232310.1016/j.apt.2016.07.007 ↗
21. Egbuchunam T, Balkose D (2012) Effect of supercritical ethanol drying on the properties of zinc oxide nanoparticles. Dry Technol 30:739–74910.1080/07373937.2012.661380 ↗