Reducing soiling issues on photovoltaic panels using hydrophobic self-cleaning coating
Source abstract
Abstract
Surfaces that simultaneously exhibit hydrophobicity, high contact angle, and high transmission of visible light are of interest for many applications such as optical devices, photovoltaic (PV) panels, and self-cleaning windows. The fabrication of such surfaces is challenging due to the competing goals of hydrophobicity and transmittance in terms of the required degree of surface roughness. In this study, the sol–gel method was used to create rough surface hydrophobic coating to reduce soiling issues on PV panels. A solution was prepared using three different materials including vinyltriethoxysilane (VTES), tetraethoxysilane (TEOS), and tetrabutoxytitanate (TTBU) called VTT (VTES–TEOS–TTBU) sol as the organic–inorganic hybrid sol. Then, this sol was applied onto glass substrates using the spin-coating method for laboratory-scale working samples. Coated samples were produced into two sets with different composition of titanium alkoxide using post-addition of water to titanium alkoxide (PWTA) and chemically modified titanium alkoxide (CMTA). The samples were then undergone surface morphological and transmission analysis. The effects of different composition were examined with respect to the contact angle, surface roughness, and optical transmittance. Based on the results obtained, CMTA sample with the highest post-bake thermal treatment (150 °C) possessed the best characteristics for hydrophobic sol–gel-based self-cleaning coating compared to the PWTA sample. This sample shown the highest contact angle (110.01°), surface roughness (0.452 nm), and transmission percentage (96% centered at 571 nm of wavelength). All coating samples were prepared in ambient condition with promising performance, eliminating the need for controlled condition based on previous researches to suit the varied temperature and humidity for different coating preparation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Recycling and Waste Management Techniques · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. He G, Zhou C, Li Z (2011) Review of self-cleaning method for solar cell array. Procedia Eng 16:640–64510.1016/j.proeng.2011.08.1135 ↗
2. Maghami MR et al. (2016) Power loss due to soiling on solar panel: a review. Renew Sustain Energy Rev 59:1307–131610.1016/j.rser.2016.01.044 ↗
3. Mozumder MS et al. (2019) Recent developments in multifunctional coatings for solar panel applications: a review. Sol Energy Mater Sol Cells 189:75–10210.1016/j.solmat.2018.09.015 ↗
4. Jamil WJ et al. (2017) Performance degradation of photovoltaic power system: review on mitigation methods. Renew Sustain Energy Rev 67:876–89110.1016/j.rser.2016.09.072 ↗
5. Hirohata T, Ota Y, Nishioka K (2013) Effect of anti-soiling coating on performance of Fresnel lens for concentrator photovoltaic module. Appl Mech Mater 372:575–57810.4028/www.scientific.net/AMM.372.575 ↗
6. Rahmanian A, Rahmani A (2018) Effects and properties of double-layer anti-reflective coating In2O3/Conic Al2O3 and three-layer anti-reflective coatings of TiO2/In2O3/Conic Al2O3 on silicon substrate. Optik 155:163–17010.1016/j.ijleo.2017.11.027 ↗
7. Carrera-Figueiras C, Pérez-Padilla Y, Estrella-Gutiérrez M A, Uc-Cayetano E G, Juárez-Moreno J A, Avila-Ortega A (2019) Surface science engineering through sol-gel process. Applied Surface Science. IntechOpenp 1–22. https://doi.org/10.5772/intechopen.8367610.5772/intechopen.83676 ↗
8. Zhang X et al. (2018) Insight into the organic–inorganic hybrid and microstructure tailor mechanism of sol–gel ORMOSIL antireflective coatings. J Phys Chem C 122(1):596–60310.1021/acs.jpcc.7b10294 ↗
9. Šiffalovič P et al. (2014) Towards new multifunctional coatings for organic photovoltaics. Sol Energy Mater Sol Cells 125:127–13210.1016/j.solmat.2014.03.001 ↗
10. Papierowska E et al. (2018) Contact angle measurements and water drop behavior on leaf surface for several deciduous shrub and tree species from a temperate zone. Trees 32(5):1253–126610.1007/s00468-018-1707-y ↗
11. Esmaeili A, Mir N, Mohammadi R (2020) A facile, fast, and low-cost method for fabrication of micro/nano-textured superhydrophobic surfaces. J Colloid Interface Sci 573:317–32710.1016/j.jcis.2020.04.027 ↗
12. H. Ennaceri H, Alami El, Brik H, Mokssit O, Khaldoun A (2014) Lotus effect and super-hydrophobic coatings for concentrated solar power systems (CSP). International Conference on Composite Materials & Renewable Energy Applications (ICCMREA), Sousse, Tunisia, p 1–4. https://doi.org/10.1109/ICCMREA.2014.684378510.1109/ICCMREA.2014.6843785 ↗
13. Baquedano E et al. (2017) Increased efficiency of solar cells protected by hydrophobic and hydrophilic anti-reflecting nanostructured glasses. Nanomaterials 7(12):43710.3390/nano7120437 ↗
14. Ibrahim MH et al. (2013) A thermo-optic multimode interference switch structure based on vinyltriethoxysilane (VTES) hybrid organic–inorganic sol–gel. Optik 124(13):1532–153510.1016/j.ijleo.2012.05.001 ↗
15. Vioux A, P Hubert Mutin (2016) Nonhydrolytic sol-gel technology. In: Klein L, Aparicio M, Jitianu A (eds) Handbook of sol-gel science and technology. Springer International Publishing, Cham, p 1–2710.1007/978-3-319-19454-7_28-1 ↗
16. Hernandez J (2017) Structural and morphological modification of TiO2 doped metal ions and investigation of photo-induced charge transfer processes. Université du Maine; Instituto politécnico nacional (México).
17. Tranquillo E, Bollino F (2020) Surface modifications for implants lifetime extension: an overview of sol-gel coatings. Coatings 10:58910.3390/coatings10060589 ↗
18. Issa A, Luyt A (2019) Kinetics of alkoxysilanes and organoalkoxysilanes polymerization: a review. Polymers 11:53710.3390/polym11030537 ↗
19. Nyamukamba P, Okoh O, Heroe H, Taziwa R, Zinya S (2018) Synthetic methods for titanium dioxide nanoparticles: a review. https://doi.org/10.5772/intechopen.7542510.5772/intechopen.75425 ↗
20. Tsurusawa H et al. (2019) Direct link between mechanical stability in gels and percolation of isostatic particles. Sci Adv 5(5):eaav609010.1126/sciadv.aav6090 ↗
21. Esposito S (2019) “Traditional” sol-gel chemistry as a powerful tool for the preparation of supported metal and metal oxide catalysts. Materials 12(4):66810.3390/ma12040668 ↗
22. Styskalik A (2017) The power of non-hydrolytic sol-gel chemistry: a review Catalysts 7:1–1710.3390/catal7060168 ↗
23. Danks AE, Hall SR, Schnepp Z (2016) The evolution of ‘sol–gel’ chemistry as a technique for materials synthesis. Mater Horiz 3(2):91–11210.1039/C5MH00260E ↗
24. Garden JA, Pike SD (2018) Hydrolysis of organometallic and metal–amide precursors: synthesis routes to oxo-bridged heterometallic complexes, metal-oxo clusters and metal oxide nanoparticles. Dalton Trans 47(11):3638–366210.1039/C8DT00017D ↗
25. Assi H et al. (2017) Titanium coordination compounds: from discrete metal complexes to metal–organic frameworks. Chem Soc Rev 46(11):3431–345210.1039/C7CS00001D ↗
26. Hafeez M, Riaz M (2016) Aminopyridine stabilized group-IV metal complexes and their applications. Appl Petrochem Res 6(4):307–34010.1007/s13203-016-0170-1 ↗
27. Li C et al. (2018) Fabrication and characterization of a TiO2/polysiloxane resin composite coating with full-thickness super-hydrophobicity. Chem Eng J 333:361–36910.1016/j.cej.2017.09.165 ↗